RCB700 Radio Commande Gamme Brochure

RCB 700 Ces informations sont données à titre indicatif, JMei se réserve le droit de les modifier sans préavis. JMei SPRL Chée De Rochefort 123, 6900 MARLOIE - TEL. +32(0)84 344 175 - FAX. +32(0)84 344 177 info@jmei.be – www.jmei.be – TVA 0534.889.177 IRC RCB700 RADIO CONTROL UNIT Ultra-compact, lightweight and sturdy unit, made from cast aluminium or polycarbonate and reinforced for industrial use; highly ergonomic design specially suited for tough environments. Protection: IP 54 Powered by a battery with more than 10 hours battery life, although the system can also be plugged into a 12v or 24 v mains supply. Protective nylon or leather carry-case. Specifications Frequency range 433/434 MHz or 868/870 MHz, 64 possible frequencies. Both transmitter and receiver frequency can be configured using the control buttons, no need to configure anything on the receiver unit. Bidirectional radio control, meaning that the receiver and transmitter can receive and transmit using a single frequency. Lightweight and manageable, making the unit very easy to use. Class 3 emergency stop push button. NiMH battery, no memory effect and long battery life (>10 hours). Operating distance: 500m. IRC-designed microprocessor-controlled charger, charging time: 4 hours. Options: Identification key, security control device (secure start-up), master/slave systems, display. Range RCB700 Controls: One or two pulse push buttons (on/off commands) One emergency stop push button LED indicator lights Uses: winches, quarry machinery (crushers, screens, conveyor belts), deadman system to ensure safety during machine maintenance, all types of simple machine. RCB700 Controls: Up to 8 pulse push buttons (on/off commands) One emergency stop push button LED indicator lights Uses: winches, hoisting machines, agricultural and forestry machines, quarry machinery (crushers, screens, conveyor belts), radio controls for safer machine maintenance, on-board radio control for mobile construction vehicles. RCB 700 Ces informations sont données à titre indicatif, JMei se réserve le droit de les modifier sans préavis. JMei SPRL Chée De Rochefort 123, 6900 MARLOIE - TEL. +32(0)84 344 175 - FAX. +32(0)84 344 177 info@jmei.be – www.jmei.be – TVA 0534.889.177 RCB700 Controls: Up to 10 pulse push buttons (on/off commands) One emergency stop push button Information is fed back on the unit’s display (means message and all types of measurement (weight, flow rate, speed, distance, temperature etc.) can be transferred. Uses: all types of machinery that feed back information, lifting machines, agricultural or forestry machines, metallurgy or founding machines, radio control for safer machine maintenance, on-board radio control of mobile construction vehicles. RCB700 Controls: 12 pulse push buttons (on/off commands) One emergency stop push button Information is fed back on the unit’s display (means message and all types of measurement (weight, flow rate, speed, distance, temperature etc.) can be transferred) Uses: all types of machinery that feed back information, lifting machines, civil engineering equipment, agricultural or forestry machines, metallurgy or founding machines, radio control for safer machine maintenance, on-board radio control of mobile construction vehicles RCB700 Controls: 4 sturdy joysticks, designed for use with gloves One emergency stop push button IP65 protection Protective safety cradle to prevent accidental activation of the controls Uses: All forestry and agricultural tasks All uses in quarries and similar environments RCB 700 Controls: One emergency stop push button One stop/start push button One 3-position wind/unwind button One (or two) potentiometer button Proportional accelerator One 3-position forward/back button One 3-position left/right button Two configurable 3-position buttons LED feedback display if needed IP65 protection Protective safety cradle to prevent accidental activation of the controls. Uses: Forestry, complex winching with hydraulic variation, full directional and movement control of machines, for controlling all types of hydraulic civil engineering machines. Accessories Other available accessories Protective case, carry harness Identification key Links the transmitter to the receiver. Allows rapid interchangeability of transmitters. TCA27 security control device: This patented system provides security when starting up any type of machine. A randomised light sequence emitted by the receiver must be encoded by the operator using the transmitter. The operator must be within view of the beacon. Highly practical clip-fixing system. Attaches to a belt or pocket Microprocessor-controlled charger : batteries can be recharged in total safety, charging time 4 hours Wall-mountable