Round Magnet L 535e

Wagner Magnete GmbH & Co. KGSpann- und Umwelttechnik87751 Heimertingen / GermanyPhone +49(0)8335/980-0Fax +49(0)8335/980-270Internet www.wagner-magnete.deE-Mail info@wagner-magnete.deTechnologyFull Of AttractionElectro lifting magnet L 535eUse:Electro lifting magnets allow adhesion and holding of ferromagnetic parts. They provide signi? cant advantages especially in the ? eld of construction of jigs and ? xtures, in production, and for economical handling of smaller and larger mass-produced parts. For ? xing the magnets tapped holes are provided at the back.Technical data:Rated voltage: 24 V D.C.Duty cycle: 100 %ambient temperature: max. 45° C (other voltages upon request)Holding forces:The holding force values speci? ed in the table refer to parts with suitab-le thickness, ground surface, steel standard no. 1.0037, with 100% reservation of the pole surface, air gap = 0 mm, ? eld winding tempera-ture = 20 ° C.Please note, that these magnets are not designed according to EN 13155, that means it is not allowed to handle parts as with a lifting magnetIf due to air gaps or in case of parts with different properties stronger hol-ding forces are required, our lifting magnets type 536 can be used.Type power [Watt]Hold.force [N]Weight [kg]a[mm]b[mm] c[mm] d[mm]e[mm]535-4 5 400 0,30 40 32 8 M4 12,5535-5 7 800 0,42 50 32 8 M4 12,5535-6.3 10 1500 0,65 63 32 8 M5 12,5535-8 14 2150 1,10 80 32 10 M6 20,0535-10 21 3800 1,70 100 32 12 M8 30,0535-15 42 6800 5,80 150 50 12 M8 40,0535-18 53 9500 8,30 180 50 15 M10 50,0535-25 108 14000 22,15 250 65 20 M16 70,0535-30 152 23000 40,10 300 80 25 M20 80,0other dimensions upon request