RSF 100 flyer

??????????? ? ??? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ?? ???????????? ? ??? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ?? ?RSF 100At-Source Sol id Pol lutant Fi l terEffective Pollutant and Litter RetentionCaptures more than 94% of solid pollutants > 200µmCollects more than 65% of total suspended solidsFilter media available to suit a range of sediment sizesNo remobilisation of captured pollutantsDry storage of pollutants and no toxic fermentationCost-Effective MaintenanceEasily cleaned by most street-sweeping vehiclesFilter liner can be removed easily for manual cleaningPollutants are not handled during cleaningEasy access to pit for drain maintenanceReduces sedimentation build-up & pipeline maintenanceMaintenance procedures within OH&S guidelinesTested and Proven Fail-Safe Overflow SystemPatented by-pass overflow eliminates the risk of floodingMinimal head/hydraulic lossDoes not affect the stormwater inlet capacityIndependently tested at a NATA-approved facilityMeets international guidelines and standardsCost-Effective Design and InstallationSimple design with corrosive-resistant materialsCan be retro-fitted into existing pits or supplied in its own pitSafe installation procedures minimise public riskCost-effective alternative to a GPTVisually unobtrusiveExcellent aid for community awareness & public educationK E Y F E A T U R E SRSF 100 before the rain eventPollutants are filtered from the flowOverflow mechanism is activatedFlow ceases and flaps return to closed position ??????????????????????N A T U R A L E C O L O G I C A L S O L U T I O N SThe RSF 100 Solid Pollutant Filter captures pollutantsat drainage entry points and consists of a capturebasket and an overflow by-pass flap(s). The basket is fitted below the invert of the gutterand inside the drainage pit and, importantly,does not obstruct flow in the outlet pipe.Solid pollutants enter the RSF 100 with the stormwater from roadside or other run-off areas, such as carparks. The incoming flow, and the pollutantsaquaplane across the flap(s) into the capturebasket. The filtered stormwater then passesinto the drainage network without anyhead/hydraulic loss through the unit. As the basket approaches 90% full, the by-pass flap(s) begins to open in response to the incoming flow. Once the basket is 100% full the pressure of the incoming flow forces open the by-pass flap(s), allowing the excess flow, to enter the drainagesystem through the by-pass openings. This effectivelyeliminates the likelihood of flooding, a commonfault with other at-source systems. Even when inby-pass, the captured pollutants are not remobilisedand are retained in the capture basket.When the flow ceases, the flap(s) returns to its normal position. In the unlikely event that the spring mechanism fails, or debris lodges in the by-pass flap(s), it will be in the open position and will not obstruct the flow or cause flooding.The RSF 100 separates, collects, and retains more than 95% of solid pollutants greater than 1.5mm in size, 94% of solids greater than200µm, and 65% of total suspended solids. ??????????? ? ??? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ?? ?RSF 100At-Source Sol id Pol lutant Fi l terN A T U R A L E C O L O G I C A L S O L U T I O N SWebsite: www.ecosol.com.au Ecosol Pty Ltd ABN 86 059 012 243 Ecosol (NZ) Wastewater Filtration Systems Ltd (Reg. No AK/1172504) Ecosol (UK) Wastewater Filtration Systems Ltd (Reg. No 4367214) Ecological Filtration Systems Sdn Bhd (Reg. No 651041-U)P E R F O R M A N C E S P E C I F I C A T I O N S???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????? ?? ???? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????? ?? ???? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????Adelaide+61 8 8212 9733Brisbane+61 7 3368 3966 Melbourne+61 3 9646 3911Sydney+61 2 9669 6000Perth+61 1300 794 654Hobart+61 1300 768 922Auckland+64 9 272 7010 Kuala Lumpur+60 3 7710 6514Townsville+61 7 4728 5711Darwin+61 1300 663 2251,2,3 Retro-fitted unit only - for more details please refer to the product technical specification manual