Sample Coolers 4.10 - Brochure

Sample Coolerswww.sentry-equip.comWater • Steam • ProcessMore than 85 Years of Sampling ExperienceThe largest selection of models offered by any manufacturer2www.sentry-equip.comCool, HEat or CondEnSE anY SaMplEThe Helical Coil product line includes the most compact and high efficiency sample coolers. A single continuous tube in varying diameters and lengths is helically coiled and fitted in a shell. A variety of materials are available to suit most fluids and gases.11 3/16 in. [283 mm]4 3/8 in. [111 mm]3/4 in. FNPTcooling water inlet1/4 in. O.D. Sample Inlet1/4 in. O.D. Sample Outlet4 7/8 [124 mm]4 7/8 in. [124 mm]1/2 in. FNPTcooling water outletTR SeriesHEliCal Coil"A"3 1/2 [89 mm]3/4 in. FNPTcooling water inlet3/8 in. Sample Outlet3/8 in. Sample Inlet5 5/8 [143 mm]5 5/8 [143 mm]3/4 in. FNPTcooling water outlet3/4 in. FNPTalternate cooling water inletFR SeriesSentry has more types of sample coolers than any other manufacturer. Flows from 0.25 Gal/Hr (1 L/Hr) to 100 Gal/Min (378 LPM) and pressure/temperature ratings up to 5,000 psi (345 bar) and up to 1100° F (593° C) are available using single tube Helical Coil, multi-tube Spiral Tube or Tube-in-Tube heat exchanger designs.With over 80 years of heat transfer experience, Sentry has the manufacturing know-how and engineering expertise to solve even the most complex sample conditioning problem. Special flow configurations, end connections, and exotic materials are our specialties.A variety of international certifications are available for most of our sample cooler products including ASME and CRN. Note: Sentry sample coolers are exempt from CE marking per Pressure Equipment Directive 97/23/EC, TÜV. Vessels are below or equal to the limits set forth in Article 3, Sections 1.1, 1.2, 1.3, and section 2 as applicable, and are designed and manufactured in accordance with sound engineering practice. Specifically, the vessel meets the general requirements of the ASME Section VIII, Division 1 Boiler And Pressure Vessel Code. The nameplate will bear the name of Sentry Equipment Corp and safety instructions will be included per Article 3, Section 3.The TR and FR series are the most popular sample coolers since they provide maximum surface area in a compact space, lowering both acquisition and installation costs. Shells on these coolers are removable and are manufactured from stainless steel as a standard.• Flow rates to 1.5 GPM (5.7 LPM) • Sample conditions up to 5000 psi (345 bar) and up to 1100° F (593° C)• Single continuous tube• High efficiency• Compact design• Code stamp• 316 SS, Alloy 625 (e.g., Inconel®) Hastelloy®, titanium and other exotic materialsCooler dimension "a" Sample Connection SizesFLR-6225 13 1/4" [337 mm] 3/8" O.D. tubeFSR-6225 13 1/4" [337 mm] 3/8" O.D. tubeFXR-6225 16" [406 mm] 3/8" O.D. tubeNote: Hastelloy is a registered trademark of Haynes International Inc. Inconel is a registered trademark of Huntington Alloys Corporation.3www.sentry-equip.comFLR-6222 450 psi @ 650ºF 2485 psi @ 680ºF 3/8" O.D. 304 SS 3.5 ft2 26 lbs 7-03953E 31 bar @ 343ºC 171 bar @ 360ºC 316 SS 0.33 m2 12 kgFLR-6225 450 psi @ 650ºF 5000 psi @ 1000ºF 3/8" O.D. 304 SS 3.5 ft2 29 lbs 7-03953A 31 bar @ 343ºC 345 bar @ 537ºC 316 SS 0.33 m2 13 kgFLR-62B3 450 psi @ 650ºF 3400 psi @ 1100ºF 3/8" O.D. 304 SS 3.5 ft2 29 lbs 7-03953G 31 bar @ 343ºC 234 bar @ 593ºC Alloy 625 0.33 m2 13 kgFLR-6BB3 450 psi @ 650ºF 3400 psi @ 1100ºF 3/8" O.D. Alloy 625 3.5 ft2 29 lbs 7-03953J 31 bar @ 343ºC 234 bar @ 593ºC Alloy 625 0.33 m2 13 kg Tube Shell Shipping Part Model No. Shell Design Tube Design Material Material Area Weight NumberTSR-4225 450 psi @ 650ºF 5000 psi @ 1000ºF 1/4" O.D. 304 SS 1.2 ft2 14 lbs 7-03952A 31 bar @ 343ºC 345 bar @ 537ºC 316 SS 0.11 m2 6 kgTSR-42B5 450 psi @ 650ºF 5000 psi @ 1100ºF 1/4" O.D. 304 SS 1.2 ft2 14 lbs 7-03952C 31 bar @ 343ºC 345 bar @ 593ºC Alloy 625 0.11 m2 6 kgTSR-4BB5 450 psi @ 650ºF 5000 psi @ 1100ºF 1/4" O.D. Alloy 625 1.2 ft2 14 lbs 7-03952E 31 bar @ 343ºC 345 bar @ 593ºC Alloy 625 0.11 m2 6 kgSpecifications – tr SeriesTLR-4225 450 psi @ 650ºF 5000 psi @ 1000ºF 1/4" O.D. 304 SS 2.4 ft2 17 lbs 7-03951A 31 bar @ 343ºC 345 bar @ 537ºC 316 SS 0.22 m2 8 kgTLR-42B5 450 psi @ 650ºF 5000 psi @ 1100ºF 1/4" O.D. 304 SS 2.4 ft2 17 lbs 7-03951C 31 bar @ 343ºC 345 bar @ 593ºC Alloy 625 0.22 m2 8 kgTLR-4BB5 450 psi @ 650ºF 5000 psi @ 1100ºF 1/4" O.D. Alloy 625 2.4 ft2 17 lbs 7-03951E 31 bar @ 343ºC 345 bar @ 593ºC Alloy 625 0.22 m2 8 kg Tube Shell Shipping PartModel No. Shell Design Tube Design Material Material Area Weight NumberFSR-6225 450 psi @ 650ºF 5000 psi @ 1000ºF 3/8" O.D. 304 SS 1.7 ft2 24 lbs 7-03954A 31 bar @ 343ºC 345 bar @ 537ºC 316 SS 0.16 m2 11 kgFSR-62B3 450 psi @ 650ºF 3400 psi @ 1100ºF 3/8" O.D. 304 SS 1.7 ft2 24 lbs 7-03954E 31 bar @ 343ºC 234 bar @ 593ºC Alloy 625 0.16 m2 11 kgFSR-6BB3 450 psi @ 650ºF 3400 psi @ 1100ºF 3/8" O.D. Alloy 625 1.7 ft2 24 lbs 7-03954G 31 bar @ 343ºC 234 bar @ 593ºC Alloy 625 0.16 m2 11 kgSpecifications – Fr SeriesModels listed are standard offerings. Consult referenced bulletins or factory for other materials and configurations.reference Bulletin 4.3 for complete tlr technical specifications.HEliCal Coil SaMplE CoolErSreference Bulletin 4.2 for complete tSr technical specifications.reference Bulletin 4.4 for complete FSr technical specifications.FXR-6222 450 psi @ 650ºF 2485 psi @ 680ºF 3/8" O.D. 304 SS 4.7 ft2 30 lbs 7-03971E 31 bar @ 343ºC 171 bar @ 360ºC 316 SS 0.44 m2 13.5 kgreference Bulletin 4.5 for complete Flr technical specifications.reference Bulletin 4.6 for complete FXr technical specifications.HEliCal Coil4www.sentry-equip.comreference Bulletin 4.7 for complete WSW technical specifications.Sample Outlet1/2” O.D. Tube1” FNPTCooling Water Inlet5" [127mm]19¼" [489mm]16¼" [413mm]1" FNPTCooling Water OutletSample Inlet1/2” O.D. Tube23" [584mm]* Tubing is 300 series stainless steel with chemical and physical properties equal to or better than T304.HEliCal Coil continued tube Shell partModel no. Shell design tube design Material Material area Weight numberWSW-8222 150 psi @ 300ºF 1200 psi @ 650ºF 1/2" O.D. 304 SS 2.5 ft2 25 lbs 7-00712A 10 bar @ 150ºC 85 bar @ 345ºC 316 SS 0.23 m2 11.5 kgSpecifications – WSW Series tube Shell partModel no. Shell design tube design Material Material area Weight number TRB-4222 250 psi @ 450ºF 2000 psi @ 635ºF 1/4" O.D. SS* 304 SS 1.2 ft2 9 lbs 7-00016A 17 bar @ 232ºC 140 bar @ 335ºC 0.11m2 4 kgSpecifications – trB Seriesreference Bulletin 4.1 for complete trB technical specifications.TRB SeriesWSW SeriesThe WSW sample cooler is designed for high viscosity/low pressure drop service and is useful in cooling slurries and very low pressure samples.The TRB sample cooler is generally used in low pressure boiler applications where a small volume of sample is required.5www.sentry-equip.comSpiral tuBEavailable Configurations – Spiral tube* “x” denotes model-specific information. Consult factory for other configurations. One piece welded shell design available. • Flow rates to 100 GPM (378 LPM) • Sample conditions up to 5000 psi (345 bar) and up to 1000° F (540° C)• Optimal design for corrosive fluid/gases• Vapor condensing/gas stripping capabilities• High flow in a small footprint• Highly resistant to thermal and hydraulic shock• Bolted or all welded shell• Numerous flow path and connection configurations• Compact and lightweight, easy to installStandard tube material: 316 SS. Optional materials include: 304 SS, Hastelloy®, Inconel®, and other alloys. Standard shell material: Carbon Steel. Optional materials include 304 SS, 316 SS and cupronickel. Standard shell side Pressure/Temperature Rating: 150 psi (10 bar) up to 400° F (204° C). Other ratings available. ABtube Configuration dimensionsSeries* 1/4" 3/8" 1/2" 3/4" H.t. area a BxSxACx n 3 ft2 10" 5"0.3 m2 254 mm 127 mmxSxCCx n n 4–7 ft2 14" 7–10"0.4 –0.7 m2 355 mm 178–254 mmxSxDCx n n 6–22 ft2 17" 7–13"0.6–2.1 m2 432 mm 178–330 mmxSxFCx n n 13–44 ft2 20" 11–22"1.21–4.09 m2 508 mm 279–559 mmxSxGCx n n 16–42 ft2 23" 14–26"1.5–3.9 m2 584 mm 355–660 mmxSxJCx n n 33–117 ft2 27" 15–30"3.1–10.9 m2 686 mm 381–762 mmxSxKCx n n 47–140 ft2 29" 15–30"4.3–13 m2 737 mm 381–762 mmxSxLCx n n 50–177 ft2 31" 15–30"4.6–16.4 m2 787 mm 381–762 mmreference Bulletin 12.1.1 for complete Spiral tube technical specifications.A spiral tube heat exchanger is a spirally coiled tube and manifold assembly fitted into a compact shell that optimizes heat transfer efficiency and space. The spiral shape of the coil and shell flow paths creates centrifugal force that enhances heat transfer on both sides in a true counterflow arrangement. By varying the number, diameter and length of the coiled tube, efficiency and footprint can be optimized versus traditional shell and tube designs.6www.sentry-equip.comtuBE-in-tuBECBADual Tube Coil (DTC) products are helically wound, full counter flow heat exchangers— well-suited for a variety of applications where low flow rates of high pressure and/or temperature fluids need heating or cooling. A variety of inner and outer tube sizes are available to meet most application requirements.• Flow rates to 3 GPM (11.4 LPM)• Sample conditions up to 6000 psi (414 bar) and up to 1100° F (593° C)• Single continuous tube• Fully drainable• Highly resistant to thermal and hydraulic shock• Sanitary model available• Copper, 316 SS, Inconel® 625, Hastelloy®, titanium and other exotic materialsSize Dim A Dim B Dim CDTC-4 5" [127mm] 13-1/8" [334mm] 18-3/8" [467mm]DTC-6 8-1/2" [216mm] 13" [330mm] 21-1/2" [546mm]DTC-8 8" [203mm] 16-1/2" [419mm] 22-3/4" [578mm]7www.sentry-equip.comtuBE-in-tuBEFor complete technical specifications reference data sheet 17.10.10 for DTC-4; 17.10.20 for DTC-6; 17.10.30 for DTC-8.Models listed are standard offerings. Consult referenced bulletins or factory for other materials and configurations.inner tube outer tube inner tube outer tube H.t. partModel no. design design Material Material area Weight numberDTC-CUA/CUA-4-1-1 2000 psig @ 300° F 700 psig @ 300° F 1/4" O.D. 1/2" O.D. 1.26 ft2 12 lbs. 7-02671A137 bar @ 148° C 48 bar @ 148° C Copper Copper 0.12 m2 5.5 kgDTC-SSA/CUA-4-1-1 4900 psig @ 1000° F 700 psig @ 300° F 1/4" O.D. 1/2" O.D. 1.26 ft2 12 lbs. 7-02671B337 bar @ 537° C 48 bar @ 148° C 316 SS Copper 0.12 m2 5.5 kgDTC-IN1/CUA-4-1-1 5450 psig @ 1100° F 700 psig @ 300° F 1/4" O.D. 1/2" O.D. 1.26 ft2 12 lbs. 7-02671C375 bar @ 593° C 48 bar @ 148° C Alloy 625 Copper 0.12 m2 5.5 kgDTC-SSA/SSB-4-1-1 4900 psig @ 1000° F 2300 psig @ 1000° F 1/4" O.D. 1/2" O.D. 1.26 ft2 12 lbs. 7-02671D337 bar @ 537° C 158 bar @ 537° C 316 SS 316 SS 0.12 m2 5.5 kgDTC-IN1/SSB-4-1-1 5450 psig @ 1100° F 2300 psig @ 1000° F 1/4" O.D. 1/2" O.D. 1.26 ft2 12 lbs. 7-02671E375 bar @ 593° C 158 bar @ 537° C Alloy 625 316 SS 0.12 m2 5.5 kgdtC Specifications – 4 Seriesinner tube outer tube inner tube outer tube H.t. partModel no. design design Material Material area Weight numberDTC-CUA/CUB-6-1-1 1250 psig @ 300° F 700 psig @ 300° F 3/8" O.D. 3/4" O.D. 1.90 ft2 20 lbs. 7-02672A86 bar @ 148° C 48 bar @ 148° C Copper Copper 0.18 m2 9 kgDTC-SSC/CUB-6-1-1 5100 psig @ 1000° F 700 psig @ 300° F 3/8" O.D. 3/4" O.D. 1.90 ft2 20 lbs. 7-02672B351 bar @ 537° C 48 bar @ 148° C 316 SS Copper 0.18 m2 9 kgDTC-IN1/CUB-6-1-1 3800 psig @ 1100° F 700 psig @ 300° F 3/8" O.D. 3/4" O.D. 1.90 ft2 20 lbs. 7-02672C262 bar @ 593° C 48 bar @ 148° C Alloy 625 Copper 0.18 m2 9 kgDTC-SSC/SSC-6-1-1 5100 psig @ 1000° F 2300 psig @ 1000° F 3/8" O.D. 3/4" O.D. 1.90 ft2 20 lbs. 7-02672D351 bar @ 537° C 158 bar @ 537° C 316 SS 316 SS 0.18 m2 9 kgDTC-IN1/SSC-6-1-1 3800 psig @ 1100° F 2300 psig @ 1000° F 3/8" O.D. 3/4" O.D. 1.90 ft2 20 lbs. 7-02672E262 bar @ 593° C 158 bar @ 537° C Alloy 625 316 SS 0.18 m2 9 kgdtC Specifications – 6 Seriesinner tube outer tube inner tube outer tube H.t. partModel no. design design Material Material area Weight numberDTC-CUB/CUC-8-1-1 1250 psig @ 300° F 700 psig @ 300° F 1/2" O.D. 1" O.D. 2.52 ft2 30 lbs. 7-02673A86 bar @ 148° C 48 bar @ 148° C Copper Copper 0.23 m2 13.6 kgDTC-SSB/CUC-8-1-1 2400 psig @ 1000° F 700 psig @ 300° F 1/2" O.D. 1" O.D. 2.52 ft2 30 lbs. 7-02673B165 bar @ 537° C 48 bar @ 148° C 316 SS Copper 0.23 m2 13.6 kgDTC-IN7/CUC-8-1-1 4000 psig @ 900° F 700 psig @ 300° F 1/2" O.D. 1" O.D. 2.52 ft2 30 lbs. 7-02673X275 bar @ 482° C 48 bar @ 148° C Alloy 625 Copper 0.23 m2 13.6 kgDTC-SSB/SSD-8-1-1 2400 psig @ 1000° F 2300 psig @ 1000° F 1/2" O.D. 1" O.D. 2.52 ft2 30 lbs. 7-02673D165 bar @ 537° C 158 bar @ 537° C 316 SS 316 SS 0.23 m2 13.6 kgDTC-IN7/SSD-8-1-1 4000 psig @ 900° F 2300 psig @ 1000° F 1/2" O.D. 1" O.D. 2.52 ft2 30 lbs. 7-02673Y276 bar @ 482° C 158 bar @ 537° C Alloy 625 316 SS 0.23 m2 13.6 kgdtC Specifications – 8 SeriestuBE-in-tuBE SpECiFiCationSa SaMpling oF SEntrY EquipMEnt'S produCtSWatEr/StEaM SaMpling • Sample Coolers • VREL® Pressure Reducers • Back Pressure Regulator/Relief Valves • Thermal Shut Off Valves • Single Line Sample Panels • Cation Resin Columns • Degassed Conductivity Panels • Corrosion Products Samplers • Temperature Control Units • Sample Sequencers • Custom Sampling SystemsIt is solely the responsibility of the end-user, through its own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied, properly maintained, and limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage.© Sentry Equipment Corp 2000 4.10 Rev. 15 05/13proCESS SaMplingSampling Equipment for: • High vapor pressure gases/liquids • High pressure gases • Gas concentration measurement • Liquids and slurries • Bulk Solids • For use in industries such as chemical, petroleum refining, cement, nuclear, mining, pharmaceutical, food and moreFor further information, contact:SENTRY EQUIPMENT CORP 966 Blue Ribbon Circle NorthOconomowoc, WI 53066 USATel: 262-567-7256 • Fax: 262-567-4523E-mail:sales@sentry-equip.comWebsite:www.sentry-equip.com