Series M 1322 - Redox Probe Brochure

Mesuring and regulation equipment / Sensors / Redox probe Redox probe series M 1322 • on-line Redox measurement • Connection output (SELECAN) or galvanicly separated current output (4-20 mA) • easy assembling • PI regulation included • IP 65 housing General: Redox measurement is used in chemical industry, in swimming-pools, potable and waste water treatment and also in different kinds of industrial measurements. Controlmatik probe M 1322 is designed for continous measurement of redox in swimming-pools, potable, waste and industrial waters. With special versions of measuring electrodes it can also be used for measurement of other media. The unit consists of redox measuring electrode and graphic display. Electronics evaluates and amplifies the measured potential. The probe can be equipped with SELECAN communication output or with the galvanicly separated 4–20 mA signal on the amplifiers output. PI regulator that independently controls a certain process, can be build in a probe The user can easily communicate with a probe over graphic display and four function keys. All this guarantees accurate and continuous measurement. 606060 BUL 02025 M - Without temperature compensation D - CANopen communication Measuring range : 1. -2000....+2000 mV 2. adjustable on request R - Regulator Mesuring and regulation equipment / Sensors / Redox probe Data is subject to change without notice. Technical data : Redox measurement : Max. measuring range from -2000 to +2000 mV Measured value resolution 1 mV Deviation of indication, measured value max.0,2% from MR Redox input signal : Input resistance at nominal operating conditions > 1000 MOhm Current input at nominal operating conditions < 1 pA Regulator: 3 point switch or PI regulator Electrical data : Power supply 9 - 36V DC or 12 - 24 VAC ± 10% Power 2 W Current output connector: Moduls 2 (galvanical separated) Isolation voltage 500V Current range 4...20 mA Power supply 9...26VDC Output range adjustable to (M.R.) Output Mode Selectable - Redox signal output - Regulator output Regulator connector: Outputs 3 x 24 VAC / 250 mA Inputs 3 x 24 VAC Mode Selectable - Motor Control - Pump Control General data : Nominal operating conditions Ambient temperature from -10 to +50°C Relative humidity 10 - 95 % non-condensating Protection IP 65 Dimensions 98 x 64 x 38 mm Weight 0,2 kg Units Drawing : Order codes : M 1322/ 616161 C- Current output Redox signal Fajfarjeva 15, 1230 Domzale, Slovenija Tel. +386 1 72 13 552, Fax +386 1 72 19 360 www.controlmatik-abw.si C