Servo - 8533 Series - Circular Connectors - Brochure

1318533 SeriesApplicationsEngine area/sensors in harsh environ-ments, railways (brake system), for allpurposes in severe climatical environ-ment and high temperature.Description• Screw coupling• Interchangeable and intermateable withMIL-C 83723 Series III T type• Plug with self locking system• High temperature connector• High level shock and vibration• Thermocouple contacts available except hermetic connectors.StandardsNFL 54143 - EN 2997Characteristics Mechanical• Shell : aluminum alloy (class R-W-A)stainless steel (class K, E, Y and YE)• Plating : nickel (class R)olive green cadmium (class W)black anodized (class A)passivated (class K, E, Y and YE)• Insulator : thermoset• Grommet and seal : silicone elastomer• Contact : copper alloyferrous alloy (class Y and YE)• Plating : gold over nickel• Mechanical endurance : 250 operations (class R and W)500 operations (class K, E, Y and YE)• Shock : 300 g during 3 ms• Vibration : random 5 Hz to 2000 Hz -1 G2/Hz (2x8 hours)• Contact retention : size 20 : 090 Nsize 16 : 111 Nsize 12 : 133 NElectrical• Dielectric withstandingAltitude ServiceAt ground 1500 Vrms15 000 m 600 Vrms21 000 m 400 Vrms33 000 m 200 Vrms• Contact resistance : as per NFL 54143 andEN 2997• Insulation resistance : > 5000 M? at 500 Vdc• Max current rating per contact : size 20 : 7.5 A size 20 : 05 Aclass Ysize 16 : 13,0 A size 16 : 10 A }size 12 : 23,0 A size 12 : 17 Aand YE• Electrical continuity : - 5 m? with RFI shielded- 60 m? without RFI shielded• Shielding : to 100 MHz at 1 GHzattenuation > 65 dBClimatic• Working temperature : - 65°C to 175°C (class W)- 65°C to 200°C (class R, A, K and Y)- 65°C to 260°C cyclic (class E and YE)• Leakage : low pressure immersion -L54001 and interfacial sealing : pressure 2kPa• Hermeticity : differential pressure of 1 bar(air helium) leakage is = 0,36 mm3/hr• Damp heat : as per NFL 54143 and EN 2997 10 cycles of 24 hours• Salt spray : 48 hours (class R-K-E-Y and YE)500 hours (class W)• Fire resistance : as per NFL 54143 andEN 2997 (class K and E)Resistance to fluidsMIL-H 5606 - SKYDROL 500 B4 - LD4JP5 - MIL-L 7870 A - MIL-L 23699MIL-L 7808 - MIL-C 25769 - MIL-A 8243specification without specification - connector supplied with standard contacts08 - connector supplied with large barrel contactsL - connector supplied without contactspolarization - N-6-7-8-9-Y - see p 136contact type P - male S - femalecontact layouts - see table p 135shell size - 08-10-12-14-16-18-20-22-24-26-28S - with 360° teethclass W - 175°C (aluminum version with olive green cadmium plating)R - 200°C (aluminum version with nickel plating)A - 200°C (aluminum version with black anodized plating)K - 200°C (stainless steel version)E - 260°C (stainless steel version)shell type 0 - square flange receptacle7 - jam nut receptacle3 - plug with self locking and RFI shielding4 - plug with self lockingbasic series 8533 - 0 R S 14-15 P N •Ordering informationEnvironmental connectors1328533 Seriespolarization see table p 136contact type P - male onlycontact layouts see table p 135shell size - 08-10-12-14-16-18-20-22-24plating N - nickelA - black anodizedW - olive green cadmiumbackshell type 31 - backnut52 - straight cable clamp51 - elbow cable clampbasic series 852-31 N 14Backshells aluminum versionspecification A - obligatory suffix for backshell type 02 onlyshell size - 08-10-12-14-16-18-20-22-24backshell type 01 - backnut02 - straight cable clampbasic series 8527-01 14 •Backshellsstainless steel versionshell size - 08-10-12-14-16-18-20*-22-24*class Y - 200°YE - 260°shell type 1 - solder fixing receptacle2 - square flange receptacle7 - jam nut receptaclebasic series 8533 - 1 Y 10-05 P NHermetic connectorsNOTE : for others types and sizes backshells - See catalogue M 85049* Consult usshell size - 08-10-12-14-16-18-20-22plating R - nickelW - olive green cadmiumA - black anodizedcap type 21 - cap for receptacle22 - cap for plugbasic series 83723-21 R 14Protective capsaluminum version1338533 SeriesFCI Souriau EN 2997 AEROSPATIALE ROLLS ROYCE DescriptionNFL 54143 (1)Cross reference listContactClass 260°CClass 175°C and 200°CFemale Male Female MaleStainlesssteelversionAluminum version852-31 •• - ASN-E0455-01 •• N - Backnut852-52N •• - ASN-E0455-02 •• N - Straight cable clamp852-51N •• - ASN-E0455-03 •• N - Elbow cable clamp8527-01 •• - ASN-E0199-01 •• K - Backnut8527-02 •• A - ASN-E0199-02 •• K - Straight cable clamp8526-1348 EN 3155-018 M 2020 - - Standard size 208526-1349 EN 3155-018 M 1616 NSA 938 151 PA 1600 - Standard size 168526-1350 EN 3155-018 M 1212 NSA 938 151 PA 1200 - Standard size 128522-2349A EN 3155-018 M 2018 NSA 938 151 PA 2000 - Large barrel size 208522-6179A EN 3155-018 M 1614 NSA 938 151 PA 1601 - Large barrel size 168526-4175 EN 3155-018 M 1618 NSA 938 151 PA 1602 - Small barrel size 168526-5041 EN 3155-018 M 1218 NSA 938 151 PA 1202 - Small barrel size 128526-1344 EN 3155-019 F 2020 - - Standard size 208526-1346 EN 3155-019 F 1616 NSA 938 152 SA 1600 - Standard size 168526-1347 EN 3155-019 F 1212 NSA 938 152 SA 1200 - Standard size 128520-292 EN 3155-019 F 2018 NSA 938 152 SA 2000 - Large barrel size 208522-6180A EN 3155-019 F 1614 NSA 938 152 SA 1601 - Large barrel size 168526-4176 EN 3155-019 F 1618 NSA 938 152 SA 1602 - Small barrel size 168526-5591 EN 3155-019 F 1218 NSA 938 152 SA 1202 - Small barrel size 128533-1000 EN 3155-004 M 2020 - ESC30 P20 BC Standard size 208533-1004 EN 3155-004 M 1616 ASN-E 0445 FW 1600 ESC30 P16 BC Standard size 168533-1002 EN 3155-004 M 2018 ASN-E 0445 FW 2001 - Large barrel size 208533-1006 EN 3155-004 M 1614 ASN-E 0445 FW 1601 - Large barrel size 168533-1008 EN 3155-004 M 1618 ASN-E 0445 FW 1602 - Small barrel size 168533-1035 EN 3155-004 M 1212 ASN-E 0445 FW 1200 ESC30 P12 BC Small barrel size 18533-1019 EN 3155-044 M 2022 - - Double crimping size 208533-1001 EN 3155-005 F 2020 - ESC30 S20 BC Standard size 208533-1005 EN 3155-005 F 1616 ASN-E 0446 DW 1600 ESC30 S16 BC Standard size 168533-1003 EN 3155-005 F 2018 ASN-E 0446 DW 2001 - Large barrel size 208533-1007 EN 3155-005 F 1614 ASN-E 0446 DW 1601 - Large barrel size 168533-1009 EN 3155-005 F 1618 ASN-E 0446 DW 1602 - Small barrel size 168533-1036 EN 3155-005 F 1212 ASN-E 0446 DW 1200 ESC30 S12 BC Standard size 128533-1018 EN 3155-045 F 2022 - - Double crimping size 20 1348533 SeriesFCI Souriau EN 2997 AEROSPATIALE BOEING BOEING ROLLS ROYCE DescriptionNFL 54143 (1) BACC 63 CN/CM BACC 63 BR/BT(2)8533-0RS ••-•• PS ?? 08(3) - ASN-E0454RS ••-•• PS ?? - - - Square flange receptacle8533-0WS ••-•• PS ?? 08(3) - - - - -8533-0RS ••-•• PS ?? EN2997-RS0 ••-••MF ?? - - - -8533-0WS ••-•• PS ?? EN2997-WS0 ••-•• MF ?? - - - -8533-0RS ••-•• PS ?? L EN2997-RS0 ••-•• AB ?? ASN-E0454RS ••-••PS ?? A - - -8533-0WS ••-•• PS ?? L EN2997-WS0 ••-•• AB ?? - - - -8533-3RS ••-•• PS ?? 08(3) - ASN-E0452RS ••-•• PS ?? - - - Plug with self locking 8533-3WS ••-•• PS ?? 08(3) - - - - - and RFI shielded8533-3RS ••-•• PS ?? EN2997-RS6 ••-•• MF ?? - - - -8533-3WS ••-•• PS ?? EN2997-WS6 ••-•• AB ?? - - - -8533-3RS ••-•• PS ?? L EN2997-RS6 ••-••AB ?? ASN-E0452RS ••-•• PS ?? A - - -8533-3WS ••-•• PS ?? L EN2997-WS6 ••-••AB ?? - - - -8533-4RS ••-•• PS ?? 08(3) - ASN-E0451R ••-•• PS ?? - - - plug with self locking8533-4WS ••-•• PS ?? 08(3 - - - - -8533-4RS ••-•• PS ?? EN2997-R6 ••-••MF ?? - - - -8533-4WS ••-•• PS ?? EN2997-W6 ••-••MF ?? - - - -8533-4RS ••-•• PS ?? L EN2997-R6 ••-••AB ?? ASN-E0451R ••-••PS ?? A - - -8533-4WS ••-•• PS ?? L EN2997-W6 ••-••AB ?? - - - -8533-0KS ••-•• PS ?? 08(3 - - - - - square flange receptacle8533-0KS ••-•• PS ?? EN2997-S0 ••-••MF ?? - - - -8533-0KS ••-•• PS ?? L EN2997-S0 ••-••AB ?? - - - -8533-3KS ••-•• PS ?? 08(3 - - - - - plug with self locking8533-3KS ••-•• PS ?? EN2997-S6 ••-•• MF ?? - - - - and RFI shielded8533-3KS ••-•• PS ?? L EN2997-S6 ••-••AB ?? - - - -8533-4KS ••-•• PS ?? 08(3) - - - - - plug with self locking8533-4KS ••-•• PS ?? EN2997-K6 ••-••MF ?? - - - -8533-4KS ••-•• PS ?? L EN2997-K6 ••-••AB ?? - - - -8533-1Y ••-•• P?? EN2997-Y1 ••-•• M ?? - - - - solder fixing receptacle8533-2Y ••-•• P?? EN2997-Y0 ••-•• M ?? - - - - square flange hermetic receptacle8533-7Y ••-•• P?? EN2997-Y7 ••-•• M ?? - - - - jam nut hermetic receptacle8533-0ES ••-•• PS ?? 08(3 - ASN-E0444SE ••-•• PS ?? - - - square flange receptacle8533-0ES ••-•• PS ?? EN2997-SE0 ••-•• MF ?? - BACC63CN••-•• PS ?? A BACC63BT ••B•• PS ?? A -8533-0ES ••-•• PS ?? L EN2997-SE0 ••-••AB ?? ASN-E0444SE ••-••PS ?? A BACC63CN••-•• PS ?? BACC63BT ••B•• PS ?? ESC10KE0 ••-•• PS ??8533-3ES ••-•• PS ?? 08(3) - ASN-E0442SE ••-•• PS ?? - - - plug with self locking8533-3ES ••-•• PS ?? EN2997-SE6 ••-••MF ?? - BACC63CM••-•• PS ?? A BACC63BR ••B•• PS ?? A - and RFI shielded8533-3ES ••-•• PS ?? L EN2997-SE6 ••-••AB ?? ASN-E0442SE••-•• PS ?? A BACC63CM••-•• PS ?? BACC63BR ••B••PS ?? ESC10SE6 ••-•• PS ??8533-4ES ••-•• PS ?? 08(3) - ASN-E0441KE••-•• PS ?? - - - plug with self locking8533-4ES ••-•• PS ?? EN2997-KE6 ••-••MF ?? - - - -8533-4ES ••-•• PS ?? L EN2997-KE6 ••-••AB ?? ASN-E0441KE••-•• PS ?? A - - ESC10KE6 ••-•• PS ??8533-KE5 •• EN2997-KE5 •• - - - - dummy receptacle8533-1YE ••-•• P ?? EN2997-YE1 ••-•• M ?? - - - ESC10YE1 ••-•• P ?? solder fixing receptacle8533-2YE ••-•• P ?? EN2997-YE0 ••-•• M ?? - - - ESC10YE2 ••-•• P ?? square flange hermetic receptacle8533-7YE ••-•• P ?? EN2997-YE7 ••-•• M ?? - - - - jam nut hermetic receptacleCross reference listStainless steel versionAluminum versionClass 260°CClass 175°C and 200°C(1) : Part numbers in specification NLF 54143. Replace EN 2997 by 3.(2) : Superseded by BACC 63 CN/CM(3) : 08 for #20 contacts layouts1358533 SeriesContact layoutsviewed from front face of male insulator ? class 200°C ? class 260°C ?hermetic? ? ? ? ? 0808-03 3#20 08-98 3#20? ? ? ? ? ?1010-05 5#20 10-06 6#20? ? ? ? ? ?1212-03 3#16 12-12 12#20? ? ? ? ? ? ? ? ?1414-04 4#12 14-07 7#16 14-15 15#20? ? ? ? ? ?164 Coax 50 ?16-10 10#16 16-24 24#20 SN393 1#16? ? ? ? ? ? ? 1818-14 14#16 18-31 31#20 18-08 8#12? ? ? ? ? ? 2037#2020-39 2#16 20-41 41#20 20-16 16#16? ? ? ? ? ? ?2222-12 12#12 22-19 19#16 22-55 55#20? ? ? ? 2424-61 61#20 24-30 30#16? ?2828-42 42#16123 45Consult us - Special product.For other contacts layout please consult us.1368533 Seriesalternative shell key and insert positions (MIL STD 1554)positions shell 20 shell 22 shell 24 shell 28key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 2656 0 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 2597 0 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 3428 0 84 152 204 3349 0 24 135 199 240Y 0 98 152 268 338alternative shell key and insert positions (MIL STD 1554)positions shell 08 shell 10 shell 12 shell 14 shell 16 shell 18key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 2656 0 102 132 248 320 102 132 248 320 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 2597 0 80 118 230 312 80 118 230 312 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 3428 0 35 140 205 275 35 140 205 275 84 152 204 334 84 152 204 334 84 152 204 334 84 152 204 3349 0 24 135 199 240 24 135 199 240 24 135 199 240Y 0 98 152 268 338 98 152 268 338PolarizationCrimp contactscontact type part numbers code by colour bands admissible wire section external ø over insulatorsize male contact female contact AWG mm2 min. Max.20standard 8526-1348 8526-1344 red - red 24-20 0.21-0.60 0.85 2.10large barrel 8522-2349A 8520-292 red - violet 22-18 0.38-0.93 0.85 2.10standard 8526-1349 8526-1346 blue - blue 20-16 0.60-1.34 1.20 2.7016 large barrel 8522-6179A 8522-6180A blue - orange 18-14 0.93-1.91 1.20 2.70small barrel 8526-4175 8526-4176 blue - orange 22-18 0.38-0.93 1.20 2.7012standard 8526-1350 8526-1347 yellow - yellow 14-12 1.91-3.18 1.90 4.01small barrel 8526-5041 8526-5591 yellow - violet 22-18 0.38-0.93 1.90 4.0120standard 8533-1000 8533-1001 red - red + 1 white dot 24-20 0.25-0.60 0.85 2.10small barrel 8533-1002 8533-1003 red - violet + 1 white dot 22-18 0.38-0.93 0.85 2.1020 double crimping 8533-1019 8533-1018 red - green + 1 white dot 22 0.4 - 1.25standard 8533-1004 8533-1005 blue - blue + 1 white dot 20-16 0.60-1.34 1.20 2.7016 large barrel 8533-1006 8533-1007 blue - orange + 1 white dot 18-14 0.93-1.91 1.20 2.70small barrel 8533-1008 8533-1009 blue - violet + 1 white dot 22-18 0.38-0.93 1.20 2.7012 standard 8533-1035 8533-1036 yellow - yellow + 1 white dot 14-12 1.91-3.18 1.90 4.01class 175°C and 200°Cclass 260°Cview of front face of plugThermocouple contactscontacttype male contact female contact admissible wire section external ø over insulatorsize C : chromel part code by colour part code by colourA : alumel numbers bands numbers bands AWG mm2 min. Max.standardC 8522-875A brown-orange-green 8522-877A brown-yel.-brown24-20 0.21-0.60 0.85 2.1020A 8522-876A brown-orange-yel. 8522-878A brown-yel.-blacklarge barrelC 8522-3761 yellow 2 dots 8522-3770 yellow 2 dots22-18 0.38-0.93 0.85 2.10A 8522-3760 black 2 dots 8522-3771 black 2 dots16 standardC 8522-881 yellow 1 dot 8522-883 yellow 1 dot20-16 0.60-1.34 1.20 2.70A 8522-882 black 1 dot 8522-884 black 1 dot12 standardC 8522-887 yellow 1 dot 8522-889 yellow 1 dot14-12 1.91-3.18 1.90 4.01A 8522-888 black 1 dot 8522-890 black 1 dotclass 175°C and 200°C1378533 SeriesDimensionsPlug type 3 classes WS - RS - KS - ES and type 4 classes WS - AS - KS - ES with backshellsAluminum backshellsStainless steel backshellsshell 08 10 12 14 16 18 20 22 24 28sizeA Max 21.30 24.90 29.60 31.25 34.42 37.34 41.91 44.07 47.24 52.00.839 .980 1.165 1.230 1.355 1.470 1.650 1.735 1.860 2.047B 1/2”-20 5/8”-24 3/4”-20 7/8”-20 1”-20 1-1/16”-18 1-3/16”-18 1-5/16”-18 1-7/16”-18 1-3/4”-18UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEFThread2A 2A 2A 2A 2A 2A 2A 2A 2A 2AC Max 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.501.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358D Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -E 6.75 9.40 12.80 14.75 17.93 19.94 23.11 26.29 29.20 -.266 .370 .504 .581 .706 .785 .910 1.035 1.150 -F Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -.506 .506 .506 .506 .506 .506 .506 . 506 .506 -L1 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -Gmin 3.20 4.75 7.40 8.90 12.75 13.45 14.75 16.35 17.95 -.126 .187 .291 .350 .502 .530 .581 .644 .707 -Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -.205 .285 .417 .476 .626 .705 .831 .957 1.083 -H Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -J Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -L2 Max 45.80 47.60 51.00 51.00 54.00 61.00 63.60 67.50 69.90 -1.803 1.874 2.008 2.008 2.126 2.402 2.504 2.657 2.752 -N Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -Lmin 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -.126 .187 .291 .350 .502 .518 .581 .644 .707 -Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -.205 .285 .417 .476 .626 .705 .831 .957 1.083 -M Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -L3 Max 50.75 52.45 55.05 56.55 60.45 61.85 63.40 65.05 66.65 -1.998 2.065 2.167 2.226 2.380 2.435 2.496 2.561 2.624 -P Max 15.20 18.30 21.50 24.70 28.70 29.60 32.90 36.00 39.50 -.598 .720 .846 .972 1.130 1.165 1.295 1.417 1.555 -Q Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -.295 .382 .508 .587 .711 .789 .921 1.039 1.161 -R Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -.500 .500 .500 .500 .500 .500 .500 .500 .500 -L4 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -Smin 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -.125 .187 .291 .351 .501 .518 .581 .644 .706 -Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -.204 .286 .416 .476 .623 .706 .831 .956 1.081 -T Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -U Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -L5 Max 45.80 48.65 51.80 51.80 55.00 61.35 64.80 67.70 70.90 -1.803 1.915 2.039 2.039 2.165 2.415 2.551 2.665 2.791 -Ø for flangeØ for flangeØ for flangeBacknut 31Straightcable clamp52Elbowcable clamp51Backnut 01Straightcable clamp021388533 Seriesshell 08 10 12 14 16 18 20 22 24 28size A Max 14.27 17.48 22.22 23.83 26.97 30.18 33.32 36.53 39.67 45.99.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 1.811B Max 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35.722 .722 .722 .722 .722 .722 .722 .722 .722 .722C Max 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45.057 .057 .057 .057 .057 .057 .057 .057 .057 .057D Max 12.66 15.84 19.02 22.19 25.36 26.95 30.12 33.30 36.47 44.41.498 .624 .749 .874 .998 1.061 1.186 1.311 1.436 1.748E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.001.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417F Max 20.75 23.95 26.31 28.69 31.88 34.24 36.63 39.80 43.38 50.83.817 .943 1.036 1.130 1.255 1.348 1.442 1.567 1.708 2.001G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67.594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562H Max 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.90 3.90.122 .122 .122 .122 .122 .122 .122 .122 .154 .154J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 -.266 .370 .504 .581 .707 .785 .909 1.035 1.593 -L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -.506 .506 .506 .506 .506 .506 .506 .506 .506 -L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -Mmin 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -.126 .187 .291 .350 .502 .518 .581 .644 .707 -Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -.205 .285 .417 .476 .626 .705 .831 .957 1.083 -N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 -1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 -Q Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -Rmin 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -.126 .187 .291 .350 .502 .518 .581 .644 .707 -Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -.205 .285 .417 .476 .626 .705 .831 .957 1.083 -S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 -2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 -T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 -.598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 -U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -.295 .382 .508 .587 .711 .789 .921 1.039 1.161 -V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -.500 .500 .500 .500 .500 .500 .500 .500 .500 -L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -Wmin 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -.125 .187 .291 .351 .501 .518 .581 .644 .706 -Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -.204 .286 .416 .476 .625 .706 .831 .956 1.081 -X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 -1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 -Square flange receptacle type 0 classes WS - RS - AS - KS - ES with backshellsAluminum backshellsStainless steel backshellsThread as plug (DIM.B)Ø for flangeØ for flangeØ for flangeBacknut 31Straightcable clamp52Elbowcable clamp51Backnut 01Straightcable clamp021398533 SeriesJam nut receptacle type 7 classes WS - RS - AS - KS - ES with backshellsAluminum backshellsStainless steel backshellsshell 08 10 12 14 16 18 20 22 24sizeA Max 14.27 17.47 22.22 23.82 26.97 30.18 33.32 36.53 39.67.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562B Max 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84.781 .781 .781 .781 .781 .781 .781 .781 .781Dmin 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18.125 .125 .125 .125 .125 .125 .125 .125 .125Max 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57.062 .062 .062 .062 .062 .062 .062 .062 .062E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.001.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417F Max 27.38 30.28 35.05 38.51 41.68 44.86 49.63 52.78 55.421.078 1.192 1.380 1.516 1.641 1.766 1.954 2.078 2.182G Max 24.89 28.04 32.79 35.33 38.51 41.68 44.86 49.63 52.81.980 1.104 1.291 1.391 1.516 1.641 1.766 1.954 2.079H Max 21.06 24.23 29.01 30.61 33.76 36.96 40.11 43.31 46.46.829 .954 1.142 1.205 1.329 1.455 1.579 1.705 1.829J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45.266 .370 .504 .581 .707 .785 .909 1.035 1.593L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85.506 .506 .506 .506 .506 .506 .506 .506 .506L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.601.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480Mmin 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95.126 .187 .291 .350 .502 .518 .581 .644 .707Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50.205 .285 .417 .476 .626 .705 .831 .957 1.083N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.501.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815O Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421Rmin 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95.126 .187 .291 .350 .502 .518 .581 .644 .707Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50.205 .285 .417 .476 .626 .705 .831 .957 1.083S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.501.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.252.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50.598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50.295 .382 .508 .587 .711 .789 .921 1.039 1.161V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70.500 .500 .500 .500 .500 .500 .500 .500 .500L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.601.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480Wmin 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93.125 .187 .291 .351 .501 .354 .581 .644 .706Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46.204 .286 .416 .476 .625 .706 .831 .956 1.081X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.601.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858Thread as plug (DIM.B)Ø for flangeØ for flangeØ for flangeBacknut 31Straightcable clamp52Elbowcable clamp51Backnut 01Straightcable clamp021408533 SeriesPanel cut-out Type 0Panel cut-out Type 7DimensionsHermetic receptacle Type 1Y/1YEshell 08 10 12 14 16 18 20 22 24 28sizeA min 15.80 18.70 23.40 24.90 28.30 31.10 34.50 37.50 40.60 48.00.622 .736 .921 .980 1.114 1.224 1.358 1.476 1.598 1.890E 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67.594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562J 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.80 3.80.126 .126 .126 .126 .126 .126 .126 .126 .150 .150C Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18.125 .125 .125 .125 .125 .125 .125 .125 .125 .125D Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18.125 .125 .125 .125 .125 .125 .125 .125 .125 .125shell 08 10 12 14 16 18 20 22 24size J 16.00 19.17 23.92 25.52 28.70 31.87 35.05 38.22 41.40.630 .755 .942 1.005 1.130 1.255 1.380 1.505 1.630H 15.24 18.41 23.16 24.76 27.94 30.99 34.16 37.33 40.51.600 .725 .912 .975 1.100 1.220 1.345 1.470 1.595K Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18.125 .125 .125 .125 .125 .125 .125 .125 .125Panel cut-outshell A B C D E F G ØJsize Max Max Max Max Max Max Max min08 1.45 22.05 18.45 14.29 18.12 12.70 26.50 12.96.057 .868 .726 .563 .713 .500 1.043 .51010 1.45 22.05 18.45 17.46 21.52 14.25 26.50 14.53.057 .868 .726 .687 .847 .561 1.043 .57212 1.45 22.05 18.45 22.22 26.57 19.05 26.50 19.30.057 .868 .726 .875 1.046 .750 1.043 .76014 1.45 22.05 18.45 23.81 27.82 20.60 26.50 20.88.057 .868 .726 .937 1.095 .811 1.043 .82216 1.45 22.05 18.45 26.99 30.92 23.79 26.50 24.05.057 .868 .726 1.063 1.217 .937 1.043 .94718 1.45 22.05 18.45 30.16 34.22 26.95 26.50 27.23.057 .868 .726 1.187 1.347 1.061 1.043 1.07220* 1.45 22.05 18.45 33.34 37.22 30.12 26.50 30.40.057 .868 .726 1.313 1.465 1.186 1.043 1.09722 1.45 22.05 18.45 36.51 40.62 33.30 26.50 23.58.057 .868 .726 1.437 1.599 1.311 1.043 .92824* 1.45 22.05 18.45 39.69 43.62 36.47 26.50 36.70.057 .868 .726 1.563 1.717 1.436 1.043 1.445* Consult us1418533 SeriesHermetic receptacle type 2Y/2YE Panel cut-outHermetic receptacle type 7Y/7YE Panel cut-outshell A B C D E F G H Jsize Max Max Max Max Max Max Max Max Max08 1.45 18.35 22.05 14.29 12.70 26.50 3.00 20.75 15.09.057 .722 .868 .563 .500 1.043 .118 .817 .59410 1.45 18.35 22.05 17.46 14.25 26.50 3.00 23.95 18.26.057 .722 .868 .687 .561 1.043 .118 .943 .71912 1.45 18.35 22.05 22.22 19.05 26.50 3.00 26.31 20.62.057 .722 .868 .875 .750 1.043 .118 1.036 .81214 1.45 18.35 22.05 23.81 20.60 26.50 3.00 28.69 23.01.057 .722 .868 .937 .811 1.043 .118 1.130 .90616 1.45 18.35 22.05 26.99 23.79 26.50 3.00 31.88 24.61.057 .722 .868 1.063 .937 1.043 .118 1.255 .96918 1.45 18.35 22.05 30.16 26.95 26.50 3.00 34.24 26.97.057 .722 .868 1.187 1.061 1.043 .118 1.348 1.06220* 1.45 18.35 22.05 33.34 30.12 26.50 3.00 36.63 29.36.057 .722 .868 1.313 1.186 1.043 .118 1.442 1.15622 1.45 18.35 22.05 36.51 33.30 26.50 3.00 39.80 31.75.057 .722 .868 1.437 1.311 1.043 .118 1.567 1.25024* 1.45 18.35 22.05 39.69 36.47 26.50 3.80 43.38 34.92.057 .722 .868 1.563 1.436 1.043 .150 1.708 1.375K L M N PMax min15.09 3.20 3.18 3.18 15.70.594 .126 .125 .125 .61818.26 3.20 3.18 3.18 18.90.719 .126 .125 .125 .74420.62 3.20 3.18 3.18 23.50.812 .126 .125 .125 .92523.01 3.20 3.18 3.18 25.10.906 .126 .125 .125 .98824.61 3.20 3.18 3.18 28.30.969 .126 .125 .125 1.11426.97 3.20 3.18 3.18 31.401.062 .126 .125 .125 1.23629.36 3.20 3.18 3.18 34.601.156 .126 .125 .125 1.36231.75 3.20 3.18 3.18 37.801.250 .126 .125 .125 1.48834.92 4.00 3.18 3.18 40.901.375 .157 .125 .125 1.610shell A B C D E F Gsize Max Max Max Max Max Max Max08 2.60 26.50 19.52 14.29 27.35 24.85 20.12.102 1.043 .769 .563 1.077 .978 .79210 2.60 26.50 19.52 17.46 30.24 28.00 24.20.102 1.043 .769 .687 1.191 1.102 .95312 2.60 26.50 19.52 22.22 35.01 32.75 28.95.102 1.043 .769 .875 1.378 1.289 1.14014 2.60 26.50 19.52 23.81 38.46 35.29 30.30.102 1.043 .769 .937 1.514 1.389 1.19316 2.60 26.50 19.52 26.99 41.64 38.46 33.45.102 1.043 .769 1.063 1.639 1.514 1.31718 2.60 26.50 19.52 30.16 44.81 41.64 34.64.102 1.043 .769 1.187 1.764 1.639 1.36420* 3.35 26.50 19.52 33.34 49.60 44.86 39.80.132 1.043 .769 1.313 1.953 1.766 1.56722 3.35 26.50 19.52 36.51 52.74 49.59 43.00.132 1.043 .769 1.437 2.076 1.952 1.69324* 3.35 26.50 19.52 39.69 55.40 52.81 46.15.132 1.043 .769 1.563 2.181 2.079 1.817H J KMax15.24 16.00 3.17.600 .630 .12518.41 19.17 3.17.725 .755 .12523.16 23.92 3.17.912 .942 .12524.76 25.52 3.17.975 1.005 .12527.94 28.70 3.171.100 1.130 .12530.99 31.87 3.171.220 1.255 .12534.16 35.05 3.171.345 1.380 .12537.33 38.22 3.171.470 1.505 .12540.51 41.40 3.171.595 1.630 .125* Not industrialized* Not industrialized4 holes ØG1428533 SeriesToolingcrimping cap for plug cap for receptacleshells A BMax Max08 3.20 134.00.126 5.27610 3.20 134.00.126 5.27612 3.20 134.00.126 5.27614 3.20 134.00.126 5.27616 3.20 134.00.126 5.27618 3.20 134.00.126 5.27622 3.20 134.00.126 5.276contact wires part numberssizes mm2 AWG crimping pliers locator0.93 18 8365 (M 22520 / 1-01) 8365-02 (M22520 / 1-02)20 0.60 20 or or0.38 22 8476-01 (M 22520 / 2-01) 8476-02 (M22520 / 2-02)0.21 241.91 141.34 1616 0.93 18 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)0.60 200.38 2212 3.18 12 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)1.91 14Insertion and extraction of wired contactsdisposable plastic tool : • colored tip for insertion• white tip for extractionExtraction of unwired contactsFiller plugthese filler plugs are installed at the rear of unwired contacts to maintain connectorsealingReusable fixing plateTwo, three or four holes self locking fixingplates, see page 126.contact sizes part numbers colour20 (M 81969-14-11) 8522-20 red16 (M 81969-14-03) 8522-16 blue12 (M 81969-14-04) 8522-12 yellowcontact sizes part numbers20 8522-5616 8522-5712 8522-58contact sizes part numbers colour20 8522-389 A*/MS 27488-20 red16 8522-390 A/MS 27488-16 blue12 8522-391 A/MS 27488-12 yellow* for class 200°C only Protective caps Aluminum version