Skimmo 20 & 27 Automatic Oil Skimmer Brochure

FEATURES• Extracts minimum of 6 (GPH) of oil at 180°F solution temperature - even more at lower temperatures.• Extracted up to 99% free of water - reusable after reprocessing• Capable of removing different types of oil and grease.• Automatic operation• Suitable for highly corrosive solutions- parts in contact with the solution are stainless steel and teflon®.• Reduces frequency of tank cleaning.• Rapid return on investment.• Two year warranty on materials and workmanship• One year warranty on electric motor and gear box.How Skimmo® Operates 1. Oil and water are picked up from the surface of the tank by the pick-up drum by using sur-face tension, fed and deposited in the run-off trough by the doctor blade and empties in to the oil separating tube.2. Oil, because of its lighter spe-cific gravity rises to the top of the separating tube, is drained off by gravity through the oil discharge port, which is higher than the normal solution level. Water and washing solution be-cause of their heavier specific gravity drop below the oil level and return to the tank through the bottom opening of the separating tube for reuse.MODEL 20 & MODEL 27SKIMMO®??????? ? ? ? ? ? ? ? ? ???Industrial Separation & Process Solutionsw w w.hudsonind.com3. If the tank has a load immersion, or similar cycle, the amount of solution displaced by the immersed load must not be allowed to rise more than 2.5”(63.5 mm) above the normal liquid level. If the solution level rises more than 2.5” (63.5 mm) above the normal solution level, a 3/4” solenoid valve should be installed in the oil discharge line to prevent water from being discharged through oil discharge port during the immersion cycle.4. CAUTION: Since the oil discharge by the SKIMMO® (if installed according to instructions,) can contain up to 1% water, it is extremely important that any quench oil recovered and intended for reuse be properly pro-cessed to remove all remaining water. Special precautions must be taken before any of the separated, recovered oil is reused in your plant because of the many possible contaminants which will not be separated by the SKIMMO®.¹ Special voltages available at an addi-tional charge² Phenolic doctor blade available upon requestAvailable Options• Unit available in 100% 304 stainless steel at an additonal charge• Optional liquid level control available at an additional charge• Single phase motors• Engineered systems availablePlease specify right or left hand oil discharge when ordering.SPECIFICATIONS MODEL 20 MODEL 27CONTAINMENT TANK SIZE34”W X 20”H 17”D34”W X 27”H 17”DDRUM LENGTH 14” 14”DRUM TYPE 304 S.S 304 S.SMOTOR1/2 HP 230¹-460 3PH60 Hz TEFC1/2 HP 230¹-460 3PH60 Hz TEFCDOCTOR BLADE TEFLON®² TEFLON®²BUSHINGS TEFLON®/UHMW TEFLON®/UHMWUNIT WEIGHT 224 LBS 238 LBSPAINT MACHINE TOOL GRAY ENAMELOILDISCHARGEPORTOIL PICK-UPDRUMDOCTORBLADENORMALWATERLEVELCHAINDRIVEOIL RUN OFFTROUGHOILHEADOIL SEPARATINGTUBEOIL & WATEROILWATERSKIMMOTANKLEGENDWATEROVERFLOWTUBESKIMMO® 20/27Your Local Sales Contact8031 East Market street - ste 2warren, oh 44484 usaoffice: 704-480-0014fax: 330-787-0299e-mail: info@hudsonind.comw w w.hudsonind.comBulletin SK06-705 0M ©2005 Hudson Industries SKIMMO® is a trademark of Hudson Industries U.S. Pat. No. 4287063??????? ? ? ? ? ? ? ? ? ???Industrial Separation & Process Solutions