Small Diameter Impeller-U001-0021

flowVERIS INDUSTRIES800.354.8556 +1 503.598.4564 www.veris.comInsert Meter, Small Diameter Impeller (SDI)DESCRIPTION The Veris direct insert style liquid flow sensor with stainless steel/PPS plastic or PEEK plastic tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2” to over 36” (38 to 915 mm) pipes, and it is intended for direct installation into the pipe through a 1” NPT hole.This sensor is available with or without hot tap capability. In the hot tap installation, the sensor is mounted in the pipe under pressure by attaching a service saddle or weld-on fitting to the pipe. Then the sensor assembly is attached to an isolation valve and extended into the pipeline to measure flow. Hot tap installations are often required in retrofit projects, but even in new construction, a hot tap sensor can be desirable for service considerations.Software and programming cable are required to operate these meters. If the meter will be used for hot tap installation, the A1027 tool is also needed (see Ordering Information).APPLICATIONS? Flow measuring projects? True hot tap installations ? BTU applications (requires temperature sensors and transmitter/monitor)FEATURES? NEMA 4 electronics housing...rugged and weather-proof? Scaled pulse and 4-20mA output available? Viton® O-ring seal...no leaks? Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durableSPECIFICATIONSRecommended Design Flow Range 0.3 to 20 ft./secPressure Rating 1000 psi @ 21°C (70°F) Maximum Temperature Rating 135°C (300°F)Operating Temperature Electronics: 20° to 65°C (14° to 150°F)Pressure Drop 0.5 psi or less @ 10 ft/sec for all pipe sizes 1.5” dia and upAccuracy ±1% of rate over optimum flow range*Repeatability ±0.5%* =10 upstream and =5 downstream straight pipe diameters, uninterrupted flow.Ideal For Pipe Sizes 1-1/2” To Over 36”SDI0H1N20-0200SDI1D1N20-0200 Year Warranty1SDI SERIESHQ0001777.C 01131flow800.354.8556 +1 503.598.4564 www.veris.comDIMENSIONAL DRAWINGSMODEL MANUF. PART # DESCRIPTIONU001-0020 A301-20* Flow, Programming Cable with CD for Badger/DI prodU001-0021 SDI0D1N10-0200 Flow, SDI, SS, 1.5 to 10, 4-20mA, No DisplayU001-0022 SDI0H1N10-0200 Flow, SDI, Hot Tap, SS, 1.5 to 10, 4-20mA, No DisplayU001-0050 A1027** Flow, Tool, Hot Tap Adapter, 1” machine to 1” NPTU001-0063 SD10D1N00-0200 Flow, SDI, SS, 1.5 to 10, Frequency, No DisplayU001-0064 SD10H1N00-0200 Flow, SDI, SS, 1.5 to 10, Hot Tap, Frequency, No DisplayU001-0149 40134-0002* Flow, Programming Data Converter with Cable and CDSDI1D1N20-0200SDI0H1N20-0200ORDERING INFORMATIONOther models available:Electronic Housing Output Display Shaft Impeller BearingO-RingMaterial Type= NEMA 4X 0 = Frequency (standard)1 = Analog 4-20mA2 = Scaled Pulse5 = Bidirectional, analog, 4-20mA (hot tap SS only)6 = Bidirectional, scaled pulse (hot tap SS only)0 = Viton® (standard) 1 = EDPM2 = AFLAS®D1 = Direct Insert for Pipe 1½ - 10”D2 = Direct Insert for Pipe 12 - 36”D3 = Direct Insert 36” and upH1 = Hot Tap for Pipe 1½ - 10”H2 = Hot Tap for Pipe 12 - 36”H3 = Hot Tap 36” and up0 = Stainless Steel/ PPS plastic Tip1 = Brass/PPS plastic Tip (no Hot Tap)2 = Stainless Steel/ PEEK plastic TipSDI 0 = No Display1 = LCD Option (requires output option 1 or 2)0 = Zirconia Ceramic (optional)1 = Hastelloy® C-276 (optional)2 = Tungsten Carbide (standard)= Stainless Steel = Torion®N 0 0 * Software and programming cable are required for analog, Modbus, LonWorks, BACnet transmitter and meter products.** A1027 required to adapt SDI hot tap sensor 1” machine thread to 1” NPT for hot tap drilling tools.4.25”(108 mm)0.7”(18 mm)Handtight Engagement + Wrench MakeupPer ANSI/ASME B1.20.1-1993, R1992D1 = 15.75” (400 mm)D2 = 19.25” (489 mm)D3 = 25.5” (648 mm)7.9”(201 mm)2.9”(74 mm)4.4”(112 mm)H1 = 19.0” (483 mm)H2 = 21.5” (546 mm)H3 = 27.5” (699 mm)isolation valve, side viewisolation valve, top view7.75”(197 mm)1” NPTExample:SDI 1 D3 N 6 0 0 2 0 0 HQ0001777.C 01131