SniffIT X3 Refrigerant Gas Leak Detector Brochure

- Leak Testing -Refrigerant leak detectorSniffIT X3® Specialist in leak testing & leak detection since 1973- Leak Testing -“First mobile leak detector with real sensitivity” SIMPLE, MOBILE, ACCURATE & AFFORDABLE1. Replaceable filter2. Flexible probe 3. Flashlight LED 4. Serial no.5. Flashlight button 6. LED bar with indication bars7. Auto Zero button8. Power indicator9. Power Jack10. Charging indicator11. On/Off switchThe SniffIT X3® at a glance1. 2.3.4.5.8.9. 10.11.7.6.Nolek, the world´s leading expert in leak testing & detection since 1973, is proud to present a new unique refrigerant gas leak detector: SniffIT X3® designed for sniffing all refrigerants – and only refrigerants. SniffIT X3® is a handheld battery powered leak detector based on a novel patented SniffIT technology®. SniffIT X3® is ergonomic and the smallest high quality instrument on the market, it weighs approximately 300g (0.66 lbs). The smallest detectable levels of refrigerants with SniffIT technology® is 0,5g/year (0,017oz/y) making the technology the most sensitive mobile instrument in the marketplace today. With SniffIT technology® the sensor never gets saturated and consequently the instrument has no variable costs unlike most alternatives. At the same time it has instantaneous reaction time and no start up time, just push the ON button and start sniffing. SniffIT X3® is built and developed to meet four criteria:• SIMPLE: not operator dependent, simply turn ON and if refrigerant gas leaks from a product it is shown on a LED bar. The color on the LED scale changes depending on the leak rate detected.• MOBILE: It is not bigger than a human hand, weighs 300g (0.66 lbs) and has 10 hours of battery capacity.• ACCURATE: SniffIT gives very accurate results based on a reliable unique technology.• AFFORDABLE: SniffIT X3® is the least expensive high quality sniffer on the market.SniffIT X3® is the most revolutionary product ever launched for leak detection within the refrigeration industry. It is smaller, more accurate, stable and reliable than all other comparable alternatives. It is a relatively inexpensive way to test to the correct legislative levels. SIMPLEThe main idea behind the SniffIT X3® is that it should be easy to use and easy to understand with as few buttons as possible. When one buys the SniffIT X3® it comes in a carrying case with a charger and two sniffer probes ready to be used instantly.MOBILEOne important feature of the SniffIT X3® is that it is very small, light and handy. It is ergonomically designed for long term use. In order to start looking for leaks one simply has to push the on button and start moving the SniffIT X3® probe across an area that could contain a possible leak.ACCURATEThe revolutionizing SniffIT® Technology makes the SniffIT X3® very fast and accurate in detecting leaks. It is the first handheld sniffer in the world to detect refrigerant gas down to 0,5g/y (0,017oz/y). AFFORDABLEThe SniffIT X3® is the lowest priced high sensitivity sniffer in the marketplace today. The SniffIT X3® also has added cost benefits with its short response time, high accuracy, short recovery time and no variable costs. Most importantly, the SniffIT X3® will detect even the smallest leak and will save money in terms of shorter time used for testing a specific object.• Service engineers in the refrigerant industry. • Air condition service and installations• Refrigerator service and installations• Cooling equipment service and installations• Locating leaks on reparable objects, rejected by pressure decay test. • Analysis of potential leak points by locating leaks on rejected products. • Automatic point testing of AC system parts. • Scan testing of welded seams.• Audit testing of new products and statistical samples. • Clamp testing of joints with high sensitivity• Test refrigerant products without filling separate tracer gas, test the filled media. • Manual point testing of refrigeration and AC parts • Leak testing in small volume production• Any product containing a refrigerant gas that should not leak can use the SniffIT X3 to locate the leak.APPLICATIONSBelow are just some examples where and by whom the SniffIT X3 can be used:TECHNICAL DATA SniffIT X3®Battery capacity 10 hoursCharging time 1,5 hoursDimensions HxWxD 131x171x50 mm (5.16x6.73x1.97”)Weight 296 gram (0.65 lbs)Detectable gases All refrigerants, including: R-22, R134a, R-404a, R-410a, R-422d, R-507, and all CFCs, HCFCs and HFCs. Sensitivity 0,5g/y (0,017oz/y)Response time < 0,1 secondRecovery time < 1 secondOperating Temperature 10-40°C (50-104°F)Storage temperature -10°C to 60°C (14-140°F)Humidity 85% RH NCInput Voltage 9 V(dc)Input Current 600 mA maxSignal presentation LED bar; green, yellow and red LEDsProbe lengths included in package 50mm (1.97”) and 200mm (7.87”)are includedPackage Airtight weather case includedCertifications CE, EMC, SAEJ1627, EN 14624Warranty: 2-year replacementIf you want to test your product with tracer gas instead, using either Helium or Hydrogen, Nolek have a unit for that exact purpose. Go on the Nolek website and read about SniffIT X1.For more information please visit: www.nolek.comDimensions171mm(6.73”)171mm(6.73”)All information contained in this document is subject to change and Nolek is not liable for any misprinted information.SIMPLE: Turn it ON and start sniffing. MOBILE: It is not bigger than a human hand, weighs 300g (0.66 lbs) and has 10 hours battery capacity. ACCURATE: SniffIT has very accurate results based on a reliable technology. AFFORDABLE: High quality detection at low cost.