Somat - HE-6S-3 - Hydra-Extractor Brochure

DESCRIPTION: Standard SOMAT® Model HE-6S-3 Hydra-Extractor® with 3 HP drive motor, 3 HP or 5 HP return pump, chem-ical additive pump, automatic rinse system, valve pack-age, Som-A-Trol® control panel and discharge chute with limit switch. Benefits ? As much as 8 to 1 (87.5%) volume reduction ? Reduced labor cost ? Better sanitation ? Water conservation ? Improved operator morale ? Reduced silverware loss Processes a wide variety of waste Operation: Slurry, consisting of 5% solids and 95% wa-ter, is automatically transported through a pipeline after being processed in the pulper(s) to the Hydra-Extractor, where water is removed and the resultant semi-dry pulp is discharged into a haul-away container. The extracted water is recovered and returned to the pulper(s) for re-use. The capacity of the Hydra-Extractor determines how many pulpers can be designed to operate with it concurrently. Somat equipment provides an economic and efficient answer to cutting the high and ever increasing costs as-sociated with waste handling. Manufactured by Somat Company of Lancaster, Pennsylvania, originators of waste pulping systems and specialists in waste reduction technology. Item No:___________________ Somat Model : HE-6S-3 Technical Specs: Hydra-Extractor: Rigid stainless steel weld-ment with aluminum stand, head assembly with 3 HP TEFC drive motor mounted to a 20:1 gear reducer, 17” long stainless steel discharge chute with limit switch, chemical additive pump, automatic rinse system. Wa-ter extractor mechanism consists of 6” diame-ter stainless steel screw with nylon brush edge, stainless steel plug cutter and matching 6” diameter reinforced stainless steel screen. Valve Package: All valves required for prop-er operation (automatic rinse system). Som-A-Trol® (Electrical Control Panel): UL approved. Includes all necessary electrical components prewired to a terminal strip in a NEMA 4 stainless steel enclosure. Options Available: ? Extended discharge chute ? Hinged Chute ? Extended stand ? Special electrical characteristics ? Pulp level detector Special Requirements: ? 7-1/2 HP, 10 HP or larger return pump, Determined by piping conditions. ? Water economizing tank. Required when 7-1/2 HP or larger return pump is used. ? Pulp Screw Conveyor and controls. Re-quired to convey pulp from discharge chute to haul-away container when loca-tion of container does not permit gravity discharge. Electrical Characteristics: 208/230/460 volt, 3 Phase, 60 Hertz Capacity: 1600 pounds per hour of foodser-vice waste mix, consisting of food scraps, plastics, milk cartons, paper, aluminum foil and cardboard. Finish: All exterior surfaces are stainless steel. Equipment only is supplied by Somat Company; installa-tion, piping and wiring not included. Somat Company—Division of ITW Food Equipment Group LLC 165 Independence Ct., Lancaster, PA 17601 USA Phone: 717-397-5100 / 800-237-6628 Fax: 717-291-0877 HE-6S-3 Remote Pulping System Elevation / Plan Views Utility Connections Dimensions E10- Extractor Drive Motor (3Hp) P10- Fresh Hot Water Inlet E11- Return Pump Motor (3Hp / 5Hp) P11- Overflow Outlet E12- Chemical Additive Pump P12- Slurry Inlet E13- Fresh Hot Water Solenoid P13- Return Water Outlet E14- N/A P14- Autorinse to Drain E15- Chute Limit Switch E16- Autorinse MOV E17- Junction Enclosure Height: 75” (1905mm) Equipment weight: 525lbs Length: 41” (1042mm) (Not including chute) Operating weight: 570lbs Width: 33” (839mm) Crated weight: 625lbs Crated volume: 59 cu. Ft. HE-6S-3 Remote Pulping System Utility Specifications Other Utility Requirements Fresh water: 4 gpm @ 45 psig, 1/2” NPT (approximate usage 40 gallons/cycle). Drain: 4” minimum floor sink, with stainless steel removable basket recommended.