Somat - SP-60S - Remote Waste Pulping System Brochure

DESCRIPTION: Standard SOMAT® Model SP-60S pulper constructed of stainless steel with a hinged stainless steel lid, water flushed tray, horizontal drive, and internal valve pack-age. The Som-A-Trol® control panel is pre-wired and contains the water level control. A push button station is also included. Benefits: As much as 8 to 1 (87.5%) volume reduction Reduced labor costs Better sanitation Water conservation Improved operator morale Reduced silverware loss Processes tough plastics, plus a wide variety of waste Operation: Foodservice waste enters the pulping tank via the tray where it is mixed with water, forming a slur-ry of 5% solids and 95% water. The slurry is pumped to a remote Hydra-Extractor®, where the water is removed, resulting in a greatly reduced volume. The resulting semi-dry pulp is discharged into a haul-away container. The extracted water is recovered and returned to the pulper for re-use. Somat® equipment provides an economic and efficient answer to cutting the high and ever increasing costs as-sociated with waste handling. ITEM No.___________________ Somat Model: SP-60S Technical Specs: Pulper: 25 1/2” diameter, 35.5” high, pol-ished stainless steel tank with water flushed tray, hinged lid and associated proximity switch. Horizontally mounted pulping and pumping system, integrated with one 6 HP TEFC motor. This unit is supported by four neoprene vibration mounts that isolate it from the stainless steel frame. A urethane vibration-absorbing gasket is located between the pulp-ing tank and pulper shell. Rubber hoses fur-ther isolate vibrations from the end plate where external connections are made. Stain-less steel shrouds totally enclose the drive sys-tem and water manifolds. Adjustable legs pro-vide 6” floor-to-frame clearance. All customer connections are external. 5 HP slurry booster pump (not shown). Components include: 304 stainless steel pulp-er tank, investment cast 17-4 stainless steel security ring and rotating blade, three replace-able stationary blades on the security ring, stainless steel impeller with replaceable stain-less steel pumping vanes. The one-piece rotat-ing blade is hardened to 46 Rockwell C and can be easily re-sharpened. Valve Package: Pre-piped bronze valves mounted on manifolds completely enclosed in stainless steel shrouds. Som-A-Trol® (Electrical Control Panel): Wall mounted, UL approved, NEMA 4 stainless steel enclosure. Included are all necessary power, control and water level components, pre-wired to a terminal strip. A push button station is included with the panel or mounted on the unit. Options Available: ? Trough Connection ? Slurry Siphon Break ? Prison Package ? Second Year Warranty Electrical Characteristics: 208/230/460 volt, 3 phase, 60 Hz. Capacity: 1000 pounds per hour of foodservice waste mix, consisting of: food scraps, plastic flatware, paper, milk cartons, Styrofoam, aluminum foil, cardboard, poly-ethylene bags and all types of plastic containers and packaging. Finish: All exterior surfaces are polished stainless steel. SP-60S Remote Pulping System ST Specs / Tray Options Utility Connections Dimensions E1- Pulper Drive Motor P1- Drain Valve Outlet (MOV) E2- Slurry Pump Motor P2- Return Water Outlet E3- N/A P3- Fresh Water Inlet E4- N/A P4- Slurry Outlet E5- Junction Enclosure P5- Return Water Inlet Height: 35.5” (902mm) Equipment weight: 410# (186kg) Length: 53.5” (1359mm) Operating weight: 530# (241kg) Width: 25.5” (648mm) Crated weight: 756# (343kg) Crated volume: 80 Cu. Ft. (2.8 Cu Meters) SP-60S Remote Pulping System UDT Specs / Trough Options Dimensions Height: 33.75” (858mm) Equipment weight: 410# (186 kg) Length: 49” (1359mm) Operating weight: 530# (241 kg) Width: 25.5” (648mm) Crated weight: 756# (343 kg) Crated volume: 80 Cu. Ft. (2.8 Cu Meters) SP-60S Remote Pulping System Utility Specs Other Utility Requirements: Fresh Water—12GPM @ 30 psig, 1/2” NTP (Approximate usage, 60-120gph) Drain—3” minimum floor sink with stainless steel removable basket recommended