SPE- Express Automation of EPA Method 1664 for Oil and Grease Analysis Brochure

The SPE-Express system is specifically designed for the extraction and evaporation required by EPA Method 1664.Automation of EPA Method 1664 for Oil and Grease AnalysisCall 800.343.5319 or 843.881.6560 • www.environmentalexpress.comE N V I R O N M E N T A L E X P R E S SSPE-Express reduces time and labor in your lab, improves accuracy plus minimizes analyst contact with hazardous chemicals.SPE-Express is the ONLY system that:• Both extracts the sample and evaporates the n-Hexane, eliminating the transfer step• Uses a fluid sensor to verify that the sample vessel is empty improving accuracy• Runs multiple samples simultaneously on up to 6 stations improving analyst efficiencySimply load the 3-station SPE-Express with standard one-liter sampling jars and walk away. The system flushes itself clean, preps the extraction disk, then filters and extracts the sample through sodium sulfate with n-Hexane. In the final stage the SPE-Express automatically transfers the extract to a pre-weighed aluminum pan where it is evaporated to dryness. Remove the pan for final weighing and the process is complete. User-friendly PC software controls the functionality while recording data for downloading to LIMS. Product Features and Benefits:• Each system has three stations• System is controlled with a PC using a single USB cable• Two systems can be joined and connected to one PC for a total of 6 stations; Laptop is included• Each station can begin processing a new sample while a previous sample is being evaporated• System comes with software containing one default method and offers the ability for the operator to create customized methods• SPE-Express software allows users to have varying levels of access• Fully enclosed unit does not require a fume hood• System utilizes wide mouth (53mm) amber jars designated by the EPA method• 33, 70, and 89mm adaptors are available for other bottle types• Available in 120V or 240VEnvironmental Express ExcellenceEnvironmental Express is the original developer and distributor of many products including SPE-Express, Smart Bottle Rack and UltraFlow Filters. Look for products in our catalog and on our website displaying this symbol.SPE-Express Specifications:Footprint: 22.25"w x 26.105"d x 22.343"hClearance: 2" all sidesWeight: 118 lbsCrated: 200 lbsElectrical: Available in 120V or 240V2 • Call 800.343.5319 / 843.881.6560SPE-Express performs the entire process through evaporation to dryness in approximately 45-50 minutes depending on the content of your sample.• Prep – 5 Minutes • Filter Sample – 15 minutesThe SPE-Express automates Oil and Grease Extraction and Evaporation as outlined in EPA Method 1664:Preps the System • Rinses all system components with n-Hexane. • Preps the extraction disk with Methanol then replaces the Methanol with DI water to avoid co-solvent elution.Filters the Sample • Vacuums the aqueous sample through the filter until the sample bottle is empty and all free liquid is removed from the filter.• Elutes the sample with n-Hexane and removes any sample residue from the sample bottle. • Vacuum filters the eluted sample through the extraction disk then transfers the eluted n-Hexane through the drying cartridge into a glass chamber. Evaporates the Eluted Sample• Transfers the sample to a heated, pre-weighed aluminum pan for evaporation to dryness.• Allows the analyst to begin processing a new sample on the same station while the first is being evaporated.The SPE-Express comes with a laptop and previously loaded easy to understand software. The software:• Allows the analyst to track the progress of each sample throughout the extraction and evaporation process. • Comes preprogrammed with EPA Method 1664 but allows the analyst to create customized methods as well.• Allows the Administrator to assign varying permission levels to other users. • Records all data through the extraction and evaporation process for downloading to LIMS.Use the Smart Bottle Rack with the SPE-Express for maximum efficiency.The Smart Bottle Rack uses special sensors to monitor the levels of reagents and waste in your containers and alerts you when they require attention. The Smart Bottle Rack makes sure you never run out of reagents or overflow your waste container.Smart Bottle Rack Catalog # G8100• Elution – 20 minutes• Evaporation – 7 minutes3 • Call 800.343.5319 / 843.881.6560E N V I R O N M E N T A L E X P R E S SCall 800.343.5319 or 843.881.6560 • www.environmentalexpress.comOrdering Information:Description Catalog #SPE-Express 120V G8000SPE-Express 240V G8000-240SPE-Express Equipment included:Description Catalog #Base 3-Station Unit, Laptop with Software, Operation and Instruction Manual, Power Cord and USB CableBottle Rack ABP110 20-Liter Carboy with Tubing and Fittings G3070 Tool Kit with Fastener Tool, Adaptor Wrench, Drying Cartridge Extractor ToolCapacitive Sensor Calibration Tool, and Reagents Pressure Hose Consumables included:Description Catalog #2 packs 5.5 Gram Na2SO4 Drying Cartridges, 50 per pack G1065 1 pack 105mm Aluminum Weigh Dishes, 100 per pack F93140DSH1 pack UltraFlow Disposable 47mm Filter Assemblies, 100 per pack G52601 pack O-Rings, 15 per pack G82061 pack Snip and Pour Standards for Oil and Grease, 20x10mL G30251 pack Snip and Pour Standards for MDL, 20x10mL G3023 Accessories sold separately:Description Catalog #Dual Unit Assembly Kit for connecting two units to one PC G805033mm Bottle Adaptor Assembly G801870mm Bottle Adaptor Assembly G801989mm Bottle Adaptor Assembly G8020 Pump - Vacuum Pressure 115VAC G3050Sample Jars, 950mL Wide Mouth (53mm) Amber Glass ESS09500050Smart Bottle Rack G8100 You will also need: • Vent Hose, 4" Diameter• Nitrogen Source (70 psi minimum/110 psi maximum). Note: Other inert gases are acceptable. (Supply hose must be an Industrial-Shape Quick Connect 0.25" socket in order to connect to unit.)G5260 Filter AssemblyG1065 Drying Cartridge4 • Call 800.343.5319 / 843.881.6560 Copyright Environmental Express, Inc., April 2013