Split Case Electric Drive Fire Pump- Brochure

NOTE To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system.MODEL 5800/5800FHORIZONTAL SPLIT-CASE AND FIRE PUMPS WITH REMOVABLE BEARING ARMSINSTALLATION, OPERATION AND MAINTENANCE MANUALPart #FMF-03-318 | © 2013 Pentair Ltd. | 08/20/13 Fairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance2TABLE OF CONTENTSFairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance3CALIFORNIA PROPOSITION 65 WARNING:WARNING:This product and related accessories contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.NOTICEFairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance4STANDARD TERMS AND CONDITIONSFairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance5STANDARD TERMS AND CONDITIONSFairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance6Fairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance7For couplings other than Fairbanks Nijhuis™ manufacture, refer to the instructions supplied for the respective couplings.Fairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance8 7. If excessive vibration or noise occurs during operation, shut the pump down and consult with a Fairbanks Nijhuis™ representative. Only Fairbanks Nijhuis qualified representatives should be engaged to service this equipment.Fairbanks Nijhuis pumps are equipped with high grade antifriction bearings which are lubricated at the factory for approximately six months average service. Periodic inspections should be made by loosening the bearing covers enough to permit visual examination of the bearings.In the event pumps are in service and operating in an area having high ambient temperatures, special greases may be required. Contact a lubrication engineer or a Fairbanks Nijhuis representative.The stuffing boxes on Fairbanks Nijhuis pumps are packed at the factory with a good grade of packing. However, all packing is subject to wear and should be given regular inspections and, if necessary, adjustments. If the pumps are stored for long periods of time prior to installation and operation, refer to Fairbanks Nijhuis Storage of Pumps Notice, Form KC1309, located at the front of this manual.Fairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance9 NOTE: If alignment cannot be obtained within .003 total indicator reading, at each end, contact a Fairbanks Nijhuis™ pump representative. DO NOT OPERATE THE PUMP. (See Fig. 4).Fairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance10When ordering spare or replacement parts, give pump serial number, size and figure number, and a complete description and item number of each part. Refer to the drawing and parts list in the back of this manual. Your order may be forwarded to your nearest Fairbanks Nijhuis™ distributor or directly to the factory.All materials or parts returned to the factory must have prior approval and a Fairbanks Nijhuis “Returned Goods Tag” to accompany them. Unnecessary delays and wasted efforts Contact your nearest Fairbanks Nijhuis distributor, listing the material to be returned and the reasons for the return. He will contact the factory to obtain approval for the return and to obtain the necessary “Returned Goods Tag” if the return is approved. You will be notified of the reasons if the approval is not given.This company makes improvements on its products from time to time and reserves the right to furnish improved parts for repairs when such parts are interchangeable. A part that is received and is not identical in appearance or has a different symbol from the original part, may be interchangeable. Examine the part carefully before contacting your Fairbanks Nijhuis representative. The parts should never be returned to the factory without first obtaining proper authorization from your Fairbanks Nijhuis representative.Fairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance11Fairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance12Fairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance13Fairbanks Nijhuis™ 08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance14Fairbanks Nijhuis™08/20/135800/5800F Horizontal Split-Case and Fire Pumps with Removable Bearing ArmsInstallation, Operation and Maintenance15FAIRBANKS NIJHUIS™ TROUBLESHOOTING SERVICE GUIDE