Stainless Steel Housing 4FOS and 5FOS

• •• • • ••••• We manufacture a complete line of four and five round models to accommodate a wide range of flow rates. Options include 304L or 316L stainless steel; band clamp or swing bolt closure. Design pressure 150psi (10bar) @ 300ºF (149ºC). Standard inlet and outlet connections are 2” MNPT with many other options available. Standard finish is poly-coat over stainless and other options can be special ordered. Standard gasket is FDA grade Buna-N.Features4FOS and 5FOSMulti-Cartridge HousingsDesigned for industrial and commercial filtration needsHeavy duty stainless steel construction for durability304L standard and 316L stainless steel available.Band clamp and swing-bolt closures for quick cartridge change outsPipe fittings readily accessible for easy installationKnife edge seal at both cartridge ends to eliminate by-passStandard housings accept double-open-end cartridgesAvailable with 222 or 226 cartridge adaptersComplete selection of pipe fittings: flanged, sanitary, BSP, grooved and othersSee ordering guide for a complete selection of options to fit your applicationStandard Design Specifications4FOS14FOS24FOS34FOS45FOS15FOS25FOS35FOS4Model4 (10”)4 (20”)4 (30”)4 (40”)5 (10”)5 (20”)5 (30”)5 (40”)Qty. (Length)of Cartridges†2” MNPT2” MNPT2” MNPT2” MNPT2” MNPT2” MNPT2” MNPT2” MNPTPipe Size1/2”NPT1/2”NPT1/2”NPT1/2”NPT1/2”NPT1/2”NPT1/2”NPT1/2”NPTDrains1/4”NPT1/4”NPT1/4”NPT1/4”NPT1/4”NPT1/4”NPT1/4”NPT1/4”NPTVent25 lbs31 lbs38 lbs45 lbs26 lbs32 lbs39 lbs46 lbsShipping Wgt.Clamp12x12x2312x12x3312x12x4312x12x5312x12x2312x12x3312x12x4312x12x53Box SizeClamp62 lbs68 lbs74 lbs80 lbs64 lbs70 lbs76 lbs82 lbsShipping Wgt.Swing Bolt18x18x2718x18x3718x18x4718x18x5718x18x2718x18x3718x18x4718x18x57Box SizeSwing Bolt2 3/4” OD2 3/4” OD2 3/4” OD2 3/4” OD2 3/4” OD2 3/4” OD2 3/4” OD2 3/4” ODMax CtgDiameter2856841123570105140Flow RateGPM*†Housings will accept: 10” = (9 3/4” or 10”) 20” = (19 1/2” or 20”) 30” = (29 1/4” or 30”) 40” = (39” or 40”) lengths*Based on 7gpm per 10” length with a 25 micron wound cartridge at 2PSID clean and a viscosity of 1 cps. Flow rates are for guide lines only.Actual flow rates are based on fluid, viscosity, cartridge type, micron ratings and other factors.Adjustable top plate acceptsvariable length cartridgesSHELCO FILTERStel: 860.854.6121 800.543.5843fax: 860.854.6120e-mail: info@shelco.comwww.shelco.com100 Bradley Street . Middletown, CT 06457 . USAORDERING GUIDEFOS SB-4 2 316 ML E222 EP2TC ---- - -ProductCodeFOSNo. ofColumns45MaterialBlank = 304L316 = 316LBulletin: 4-5FOS-500.1© 2005 Shelco FiltersMicroVantage™, MicroSentry™, ShelcoFilters®, and the Shelco Filters logo are registered trademarks of the Tinny CorporationShelco Filters is a division of the Tinny Corporation. No. ofStacks 1 = 1 High2 = 2 High3 = 3 High4 = 4 HighClosureStyleBlank=V-BandClampSB =SwingBoltGasketCartridge ConfigurationBlank = Double Open Ended222 = 222 Style CartridgeFin or Flat226 = 226 Style CartridgeFin or FlatConnection TypeBlank = 2” MNPT1.5MNPT = 1 1/2” MNPTBSP = 2” BSP-NIPPLE1F = 1” Flange1.5F = 1 1/2” Flange2F = 2” Flange1TC = 1” Ferrules1.5TC = 1 1/2” Ferrules2TC = 2” Ferrules2.5TC = 2 1/2” FerrulesGF1.5 = 1 1/2” Grooved FittingsGF2 = 2” Grooved Fittings2FMPT = 2” Coupling FinishBlank = Standard Poly CoatEP = Electro-PolishedGB = Glass BeadP = PassivateOptionsBlank = NoneML = LegsTABS = TabsOL = Heavy DutyLegsGP = Gauge PortsGPA = Gauge Portswith gaugesUP = Universal PartsBlank = BunaE = EPRS = SiliconeV = VitonTS = TeflonEncasulatedSilicone DimensionsMounting Tabs(May be installed at site)Sanitary Fittings Gauge Port Assemblywith Mounting LegsElectro-polishMODEL CLAMP STYLE SWING BOLT STYLE DIM A DIM A4FOS1 20 7/8” 22 1/4”4FOS2 30 7/8” 32 1/4”4FOS3 40 7/8” 42 1/4”4FOS4 50 7/8” 52 1/4”5FOS1 20 7/8” 22 1/4”5FOS2 30 7/8” 32 1/4”5FOS3 40 7/8” 42 1/4”5FOS4 50 7/8” 52 1/4”KNOBAMOUNTING LEGS (Optional)7"MOUNTINGTABS(Optional)1/2" DRAINPORTS3"2 1/2"1 1/8"(OPTIONAL)2" MALE PIPE NPTPLATE BUSHINGBUSHING RETAINERHOLD DOWN PLATEDOE CARTRIDGE222 CARTRIDGE CENTER RODGASKETCLAMPHEADVENT7"3"2 1/2"1 1/8"VENTHANDLE2" FLANGESWING BOLT ASSEMBLY10 1/4"± 1/4"12"± 1/4"120º"MOUNTING TABS (3) 120º APARTWITH 7/16" DIA. HOLES ON A 11 1/16" B.C.1/2" DRAINSMOUNTING LEGS (3) 120º APARTWITH 9/16" DIA. HOLES ON A 11 1/8" B.C.A