Star Power Super Cleaner/Degreaser Material Data Sheet Brochure

Starpower MSDS page 1 of 2 MATERIAL SAFETY DATA SHEET Section I – Manufacturer Identification Manufacturer’s Name: Paradigm International, Inc. Distributor: EnviroMet, Vancouver WA Emergency Telephone Number: (360) 944-6100 Telephone Number for Information: (360) 944-6100 (Above numbers active between 8 AM and 5 PM PST) Date Prepared: 2/1/2000 Section II – Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity; Common Name(s)): Ethylene Glycol Monobutyl Ether (EGBE) (2-butoxyethanol) CAS No: 111-76-2 ACGIH TLV-TWA 25 PPM (skin) OSHA PEL-TWA 25 PPM These are the numeric values for pure EGBE. However, STARPOWER only has a <9% level of EGBE, prior to dilution for use. Dilution, of course, further decreases the level. Section III – Physical/Chemical Characteristics Boiling Point: 212EF Vapor Pressure: (mm Hg.): ND Vapor Density: (AIR=1): ND Solubility in Water: Complete Specific Gravity: (H 2 O=1): 1.05 +or - 0.050 Percent Volatile by Volume: ND Evaporation Rate: (Butyl Acetate=1): 0.1 Appearance: Clear colorless liquid Odor: Butyl cellosolve Section IV – Fire and Explosion Hazard Data Flash Point (Test Method): >212F Flammable limits: Non-flammable LEL: ND UEL: ND Extinguishing Media: Non-flammable. No special procedures required. Special Fire Fighting Procedures: None Unusual Fire and Explosion Hazards: None Starpower MSDS page 2 of 2 Section V – Health Hazard Data Effects of Overexposure: Prolonged exposure may result in material being absorbed in harmful amounts. Inhalation: May cause irritation, dizziness, nausea. Eyes & Skin: May cause irritation, redness. Ingestion: Irritant. Emergency and First Aid Procedures: If eyes come in contact, rinse affected area with water. If irritation persists, consult a physician. Ingestion: Do not induce vomiting. Give several glasses of water. Call a physician. Section VI – Reactivity Data Stability: Stable Conditions to Avoid: Not Known Incompatibility: Strong Oxidizers Hazardous Decomposition or By-Products: None Hazardous Polymerization: No data available Section VII – Spill or Leak Procedures Steps to be Taken in Case Material is Released or Spilled: Mop up and rinse area with water. Waste Disposal Method: Comply with Federal, State and local regulations for proper notification of spill and disposal. Section VIII – Special Protection Information Respiratory Protection: None Ventilation: Local Exhaust: None Mechanical: None Special: None Other: None Protective Gloves: None Eye Protection: None Other Protective Clothing or Equipment: None Work/Hygienic Practices: Normal good housekeeping Section IX – Special Precautions Precautions to be Taken in Handling and Storing: Keep away from sparks and open flame. Keep away from children.