Surface - Model 2CDX-2CDXL - Dual Impeller Centrifugal Electric PumpsBrochure

Your Life, our Quality. Worldwide. Commercial 13 Your Life, our Quality. Worldwide. Commercial 12 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.2CDX (l)DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304 and AISI 316Dual impeller centrifugal electric pumps with hydraulic parts in AISI 304 and AISI 316 stainless steel. APPLICATIONS• Domestic pressure boosting• Small-scale garden irrigation• Washing• Treating water• Cooling towers• Moving clean water in generalTECHNICAL DETAILS• Strong structure• Small dimensionsPUMP TECHNICAL DATA• Maximum working pressure: 8 bar• Maximum temperature of the liquid: -5°C ÷ +60°C for standard and E version -5°C ÷ +110° for H-HS-HW-HSW version• G1½ suction connection for 2CDX 200, G1¼ for the rest of the range• G1 discharge connectionMOTOR TECHNICAL DATA• High efficiency motors IE2 starting from 0,75kW• Self-ventilated 2 pole asynchronous motor• Class of insulation F• IP55 Protection degree• 230V ±10%, 50Hz single phase voltage 230/400V ±10%, 50Hz three phase voltage• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor• Protection under user’s responsibility for the three phase versionMATERIALSAISI 304 version• Pump casing, impeller, shaft, diffuser and seal housing disc in EN 1.4301 (AISI 304)AISI 316 version• Pump casing, impeller, shaft, diffuser and seal housing disc in EN 1.4301 (AISI 316)• Aluminium motor bracket (up to 1.5 kW included), in cast iron (2.2 kW and above)• Mechanical sealing in: - Ceramic/Carbon/NBR (standard) - Ceramic/Carbon/FPM (H version) - SiC/SiC/FPM (HS version) - Tungsten Carbide/Tungsten Carbide/FPM (HW version) - SiC/Tungsten Carbide/FPM (HSW version) - Ceramic/Graphite/EPDM (E version) - Tungsten Carbide/Special Carbon/EPDM (U3CEGG version)CONTROL PANELS• 1EP• 1EPBHACCESSORIES (On request)• 5 litres 10 bar ¾ EPDM vessel• 24 litres 8 bar 1” EPDM vessel• 24 litres 10 bar 1” EPDM vessel• PVC 5m key float with counter-weight• PVC 10m key float with counter-weight• SQUARE-D FSG-2 1.4÷4.6 bar G¼ F pressure switch• FYG-22 2.8÷7 bar G¼ F pressure switch• Presscomfort - Pressure regulator PERFORMANCE RANGE (according to ISO 9906 Attachment A)2CDXPower HP120 15Hydraulic code10121520304050IDENTIFICATION CODE/MHSingle PHaSe70120200PERFORMANCE CURVES 2CDX 70 series(according to ISO 9906 Attachment A)PERFORMANCE CURVES 2CDX 200(according to ISO 9906 Attachment A)ModeloPtional verSionHHSHWHSWEU3CEGGYour Life, our Quality. Worldwide. Commercial 13 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.Your Life, our Quality. Worldwide. Commercial 12 PERFORMANCE CURVES 2CDX 70 series(according to ISO 9906 Attachment A)PERFORMANCE CURVES 2CDX 120 series(according to ISO 9906 Attachment A)PERFORMANCE CURVES 2CDX 200(according to ISO 9906 Attachment A)2CDX (l)DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304Your Life, our Quality. Worldwide. Commercial 15 Your Life, our Quality. Worldwide. Commercial 14 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.PERFORMANCE TABLEModel P2 Q=Flow rateSingle phase Three phase l/min 20 40 60 80 120 150 180 210230V 230/400V [HP] [kW] m3/h 1,2 2,4 3,6 4,8 7,2 9 10,8 12,6H=Head [m]2CDXM 70/10 2CDX 70/10 1 0,75 38,5 35,3 31,5 27,0 - - - -2CDXM 70/12 2CDX 70/12 1,2 0,9 44,5 40,3 35,5 30,0 - - - -2CDXM 70/15 2CDX 70/15 1,5 1,1 52,5 48,0 42,8 36,5 - - - -2CDXM 70/20 2CDX 70/20 2 1,5 60,0 55,6 50,4 44,0 - - - -2CDXM 120/15 2CDX 120/15 1,5 1,1 - 42,0 41,0 39,5 35,0 30,0 - -2CDXM 120/20 2CDX 120/20 2 1,5 - 51,5 49,5 47,4 41,8 36,5 - -- 2CDX 120/30 3 2,2 - 59,0 57,0 54,6 49,2 44,0 - -- 2CDX 120/40 4 3 - 68,5 66,5 64,0 58,0 52,0 - -- 2CDX 200/30 3 2,2 - - 52,0 50,8 48,1 45,5 42,7 39,5- 2CDX 200/40 4 3 - - 62,5 61,1 58,0 55,2 52,3 49,0- 2CDX 200/50 5,5 3,7 - - 71,5 70,1 67,0 64,3 61,2 57,5DIMENSIONS[1]= Three phase only[2]= Single phase onlyDIMENSIONAL TABLEModel Dimensions [mm] WeightA A1* B C D E F H H1 H2 H3 H4 M M1 N N1 R T V W S DNA [kg][2] [2] [1] [1] [2] [2] [1] [2] [1]2CDX(M) 70/10 208 - 355 354 181 12,5 8 87 229 106 123 207 216 50 38 120 160 142 PG 11 PG 11 92,5 9 G1¼ 12,7 12,62CDX(M) 70/12 208 210 355 366 181 12,5 8 87 229 106 123 207 235 50 38 120 160 142 PG 13,5 PG 11 92,5 9 G1¼ 13,3 13,72CDX(M) 70/15 232 - 395,5 382 198,5 12,5 8 89 250 118 132 237 248,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 17,5 17,02CDX(M) 70/20 232 - 382,5 395 198,5 12,5 8 89 250 118 132 237 248,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 18,5 19,22CDX(M) 120/15 208 210 395,5 382 198,5 12,5 8 89 229 106 123 225 236,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 16,3 15,62CDX(M) 120/20 208 210 382,5 395 198,5 12,5 8 89 229 106 123 225 236,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 17,0 17,42CDX 120/30 232 - - 419 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1¼ - 25,22CDX 120/40 232 - - 458 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1¼ - 27,82CDX 200/30 208 - - 458 223,5÷234,5 12,5 10 87 229 106 123 230 - 65 40 140 180 143,5 - PG 13,5 109 9 G1½ - 25,72CDX 200/40 232 - - 458 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1½ - 27,62CDX 200/50 232 - - 481 232,5 16 12 87 250 118 132 259 - 68 50 160 210 143,5 - PG 16 108,5 12 G1½ - 35,62CDX (l)DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304[1]= Three phase only[2]= Single phase onlyMATERIALS TABLERef. Name Materials Ref. Name Materials1 Pump casing EN 1.4301 (AISI 304)/AISI 316 32 Key AISI 3163 Motor bracket Aluminium (up to 1.5 kW included) 34 Impeller nut Stainless steel A2-70/AISI 316Cast iron (from 2.2 kW and above) 42 Motor support Aluminium4 Casing cover EN 1.4301 (AISI 304)/AISI 316 52 Terminal box [2] ABS6 Shaft EN 1.4301 (AISI 304)/AISI 316Part in contact with the liquid 53 Terminal box cover [2] ABS7 Impeller EN 1.4301 (AISI 304) 56 Terminal box cover gasket NBR8 Impeller EN 1.4301 (AISI 304) 72 Casing ring [4] NBR9 Diffuser EN 1.4301 (AISI 304) 73 Casing ring [4] NBR11 Mechanical seal Ceramic/Carbon/NBR 75 Washer EN 1.4301 (AISI 304)/AISI 31612 Motor frame - 76 Washer EN 1.4301 (AISI 304)/AISI 31613 Motor cover Aluminium 77 O-Ring [3] NBR14 Fan PA 78 O-Ring [3] NBR15 Fan cover Galvanised Fe P04 79 Diffuser spacer EN 1.4301 (AISI 304)17 Terminal box cover [1] Aluminium 90 Gasket [2] NBR18 Splash ring NBR 92 Seal ring NBR19 Bearing (pump side) - 93 Seal ring NBR20 Bearing (motor side) - 102 Diffuser cover EN 1.4301 (AISI 304)21 Adjusting ring Steel C70 103 Conveyor cover EN 1.4301 (AISI 304)22 Tie-rod Galvanised Fe 42 105 Impeller spacer EN 1.4301 (AISI 304)24 Plug EN 1.4301 (AISI 304)/AISI 316 200 Screw (pump body) Stainless steel A2-7025 Plug EN 1.4301 (AISI 304)/AISI 316 201 Screw Zn. Steel cl.8.826 O-Ring [3] NBR 212 Screw Stainless steel A227 O-Ring [3] NBR 230 Washer Steel C70SECTIONAL VIEW[1]= Three phase only[2]= Single phase only[3]= FPM for H-HS-HW-HSW versions, EPDM for E version[4]= FPM for H-HS-HW-HSW versions, NBR for E versionYour Life, our Quality. Worldwide. Commercial 15 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.Your Life, our Quality. Worldwide. Commercial 14 Model P2 Q=Flow rateSingle phase Three phase l/min 20 40 60 80 120 150 180 210230V 230/400V [HP] [kW] m3/h 1,2 2,4 3,6 4,8 7,2 9 10,8 12,6H=Head [m]2CDXM 70/10 2CDX 70/10 1 0,75 38,5 35,3 31,5 27,0 - - - -2CDXM 70/12 2CDX 70/12 1,2 0,9 44,5 40,3 35,5 30,0 - - - -2CDXM 70/15 2CDX 70/15 1,5 1,1 52,5 48,0 42,8 36,5 - - - -2CDXM 70/20 2CDX 70/20 2 1,5 60,0 55,6 50,4 44,0 - - - -2CDXM 120/15 2CDX 120/15 1,5 1,1 - 42,0 41,0 39,5 35,0 30,0 - -2CDXM 120/20 2CDX 120/20 2 1,5 - 51,5 49,5 47,4 41,8 36,5 - -- 2CDX 120/30 3 2,2 - 59,0 57,0 54,6 49,2 44,0 - -- 2CDX 120/40 4 3 - 68,5 66,5 64,0 58,0 52,0 - -- 2CDX 200/30 3 2,2 - - 52,0 50,8 48,1 45,5 42,7 39,5- 2CDX 200/40 4 3 - - 62,5 61,1 58,0 55,2 52,3 49,0- 2CDX 200/50 5,5 3,7 - - 71,5 70,1 67,0 64,3 61,2 57,5Model Dimensions [mm] WeightA A1* B C D E F H H1 H2 H3 H4 M M1 N N1 R T V W S DNA [kg][2] [2] [1] [1] [2] [2] [1] [2] [1]2CDX(M) 70/10 208 - 355 354 181 12,5 8 87 229 106 123 207 216 50 38 120 160 142 PG 11 PG 11 92,5 9 G1¼ 12,7 12,62CDX(M) 70/12 208 210 355 366 181 12,5 8 87 229 106 123 207 235 50 38 120 160 142 PG 13,5 PG 11 92,5 9 G1¼ 13,3 13,72CDX(M) 70/15 232 - 395,5 382 198,5 12,5 8 89 250 118 132 237 248,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 17,5 17,02CDX(M) 70/20 232 - 382,5 395 198,5 12,5 8 89 250 118 132 237 248,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 18,5 19,22CDX(M) 120/15 208 210 395,5 382 198,5 12,5 8 89 229 106 123 225 236,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 16,3 15,62CDX(M) 120/20 208 210 382,5 395 198,5 12,5 8 89 229 106 123 225 236,5 55 40 140 180 141,5 PG 13,5 PG 11 95 9 G1¼ 17,0 17,42CDX 120/30 232 - - 419 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1¼ - 25,22CDX 120/40 232 - - 458 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1¼ - 27,82CDX 200/30 208 - - 458 223,5÷234,5 12,5 10 87 229 106 123 230 - 65 40 140 180 143,5 - PG 13,5 109 9 G1½ - 25,72CDX 200/40 232 - - 458 223,5÷234,5 12,5 10 87 250 118 132 242 - 65 40 140 180 143,5 - PG 13,5 109 9 G1½ - 27,62CDX 200/50 232 - - 481 232,5 16 12 87 250 118 132 259 - 68 50 160 210 143,5 - PG 16 108,5 12 G1½ - 35,62CDX (l)DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304MATERIALS TABLERef. Name Materials Ref. Name Materials1 Pump casing EN 1.4301 (AISI 304)/AISI 316 32 Key AISI 3163 Motor bracket Aluminium (up to 1.5 kW included) 34 Impeller nut Stainless steel A2-70/AISI 316Cast iron (from 2.2 kW and above) 42 Motor support Aluminium4 Casing cover EN 1.4301 (AISI 304)/AISI 316 52 Terminal box [2] ABS6 Shaft EN 1.4301 (AISI 304)/AISI 316Part in contact with the liquid 53 Terminal box cover [2] ABS7 Impeller EN 1.4301 (AISI 304) 56 Terminal box cover gasket NBR8 Impeller EN 1.4301 (AISI 304) 72 Casing ring [4] NBR9 Diffuser EN 1.4301 (AISI 304) 73 Casing ring [4] NBR11 Mechanical seal Ceramic/Carbon/NBR 75 Washer EN 1.4301 (AISI 304)/AISI 31612 Motor frame - 76 Washer EN 1.4301 (AISI 304)/AISI 31613 Motor cover Aluminium 77 O-Ring [3] NBR14 Fan PA 78 O-Ring [3] NBR15 Fan cover Galvanised Fe P04 79 Diffuser spacer EN 1.4301 (AISI 304)17 Terminal box cover [1] Aluminium 90 Gasket [2] NBR18 Splash ring NBR 92 Seal ring NBR19 Bearing (pump side) - 93 Seal ring NBR20 Bearing (motor side) - 102 Diffuser cover EN 1.4301 (AISI 304)21 Adjusting ring Steel C70 103 Conveyor cover EN 1.4301 (AISI 304)22 Tie-rod Galvanised Fe 42 105 Impeller spacer EN 1.4301 (AISI 304)24 Plug EN 1.4301 (AISI 304)/AISI 316 200 Screw (pump body) Stainless steel A2-7025 Plug EN 1.4301 (AISI 304)/AISI 316 201 Screw Zn. Steel cl.8.826 O-Ring [3] NBR 212 Screw Stainless steel A227 O-Ring [3] NBR 230 Washer Steel C70SECTIONAL VIEW[1]= Three phase only[2]= Single phase only[3]= FPM for H-HS-HW-HSW versions, EPDM for E version[4]= FPM for H-HS-HW-HSW versions, NBR for E versionYour Life, our Quality. Worldwide. Commercial 17 Your Life, our Quality. Worldwide. Commercial 16 The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.2CDX (l)DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304MECHANICAL SEAL 2CDX standard MATERIALS TABLERef. Name MaterialsA Rotating part CeramicB Fixed part CarbonC O-Ring NBRD O-Ring NBRE O-Ring NBRF Spring AISI 316G Structure/frame AISI 304ELECTRIC DATA TABLEModel P2 Efficiency Capacitor Efficiency (%) P1 Absorbed CurrentSingle phase Three phase Single phase Three phase [A]230V 230/400V [HP] [kW] Single phase Three phase µF Vc ? % Single phase Three phase Single phase Three phase50% 75% 100% [kW] [kW] 230V 230V 400V2CDXM 70/10 2CDX 70/10 1 0,75 - IE2 20 450 77,2 80,9 81,3 1,30 1,14 6,0 3,6 2,02CDXM 70/12 2CDX 70/12 1,2 0,9 - IE2 31,5 450 79,0 81,7 81,6 1,55 1,35 7,0 4,3 2,52CDXM 70/15 2CDX 70/15 1,5 1,1 - IE2 40 450 79,7 82,5 83,0 1,80 1,80 8,1 5,6 3,22CDXM 70/20 2CDX 70/20 2 1,5 - IE2 40 450 80,3 83,4 83,8 2,30 2,28 10,0 7,4 4,32CDXM 120/15 2CDX 120/15 1,5 1,1 - IE2 40 450 79,7 82,5 83,0 1,80 1,80 8,3 5,6 3,22CDXM 120/20 2CDX 120/20 2 1,5 - IE2 40 450 80,3 83,4 83,8 2,35 2,28 10,2 7,3 4,2- 2CDX 120/30 3 2,2 - IE2 - - 83,1 85,7 86,2 - 2,90 - 8,8 5,1- 2CDX 120/40 4 3 - IE2 - - 85,0 86,7 86,3 - 3,48 - 10,6 6,1- 2CDX 200/30 3 2,2 - IE2 - - 85,0 86,7 86,3 - 3,48 - 10,6 6,1- 2CDX 200/40 4 3 - IE2 - - 85,0 86,7 86,3 - 3,83 - 11,6 6,7- 2CDX 200/50 5,5 3,7 - IE2 - - 84,3 87,2 87,8 - 4,56 - 15,1 8,7PERFORMANCE CURVES (according to ISO 9906 Attachment A)IDENTIFICATION CODESPECIAL MECHANICAL SEALS (on request)Ref. Name MaterialsH version HS version HW version HSW version E version U3CEGG versionA Rotating part Ceramic SiC Tungsten Carbide SiC Ceramic Tungsten CarbideB Fixed part Carbon SiC Tungsten Carbide Tungsten Carbide Carbon Special CarbonC O-Ring FPM FPM FPM FPM EPDM EPDMD O-Ring FPM FPM FPM FPM EPDM EPDME O-Ring FPM FPM FPM FPM EPDM EPDMF Spring AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316G Structure/frame AISI 304 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316NOISE DATA TABLEModel P2 LpA - dB(A)*Single phase Three phase230V 230/400V [HP] [kW]2CDXM 70/10 2CDX 70/10 1 0,75 622CDXM 70/12 2CDX 70/12 1,2 0,92CDXM 70/15 2CDX 70/15 1,5 1,1 642CDXM 70/20 2CDX 70/20 2 1,52CDXM 120/15 2CDX 120/15 1,5 1,1 642CDXM 120/20 2CDX 120/20 2 1,5- 2CDX 120/30 3 2,2 68- 2CDX 120/40 4 3- 2CDX 200/30 3 2,268- 2CDX 200/40 4 3- 2CDX 200/50 5,5 3,7* Mean value of several measures at 1m distance around the pump. Tollerance ± 2.5 dB.