SWAN - B-Flow IS1000 - Stainless Steel Flow Cell for two Sensors Datasheet

SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Flow cell B-Flow IS1000Data sheet no. DenA83228027 04/2008 Subject to change without notice DenA83228027_Flow_cell_B-Flow_IS1000 Stainless steel flow cell for 2 sensors with integrated temperature probe Flow cell B-Flow IS1000 Flow cell for two PG13.5 sensors with built-in Pt1000 temperature probe. Suitable for all sensors with PG13.5 screw head and a max. shaft length of 120 mm. Connection to tubes with selectable Swagelok fittings. Technical data Flow cell and removable cover made of stainless steel SS316L. Operating temperature - for flow cell: up to +130 °C - for pH/Redox sensors: max. 50 °C Operating pressure - for flow cell: max. 10 bar at +130 °C - for sensor: max. 5 bar Process connections at inlet and outlet: 2 x ¼" NPT female thread Temperature sensor connection: Screw head Flow cell with optional Swagelok fittings. Delivery: Flow cell with integrated temperature probe and 1 blind plug with O-ring for PG13.5 thread. Order number: Flow cell B-Flow IS1000 A – 83 . 228 . 027 Accessories: Swagelok fittings are not included. Please order them separately according to your installation requirements: A-86.530.020 Swagelok fitting ¼" NPT female thread to ¼" tube (Ø 6.35 mm), straight A-86.530.020 Swagelok fitting ¼" NPT female thread to ¼" tube (Ø 6.35 mm), angle A-86.530.040 Swagelok fitting ¼" NPT female thread to 10 mm tube A-86.530.050 Swagelok fitting ¼" NPT female thread to 8 mm tube A-89.300.040 Mounting set for complete flow cell (pipe clip Ø 55 mm with holder)