Tango TX1 Single Gas Detector Datasheet

Tango™ TX1Single Gas Detector A 3-year runtime and patent pending DualSense™ Technology increases worker safety, regardless of bump test frequency, while reducing overall costs Significantly Increases Worker Safety The use of Industrial Scientific’s DualSense™ Technology ensures that, regardless of your current bump test policy, you will be incomparably safer with the Tango than with any other single gas detector on the market today. Enhanced Battery Life for a 3 Year Life Span The Tango™ TX1 improves on its predecessor, the GasBadge Plus, allowing a continuous “always-on” mode for three years. After the battery can no longer support instrument life, it can be replaced to allow another 3 years of continuous operation Powerful 100dB Instrument Alarm The detector alarms at 100dB at 10 centimetres making it twice the volume of Industrial Scientific’s GasBadge and louder than any single gas detector on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™KEYBENEFITS• Designed for continuous operation for three years • Full 3 year warranty on CO2 & H2S sensors • DualSense™ Technology includes two of the same type sensor for the detection of a single gas• Factory-installed sensors warranted to be free from defects By wearing the Tango™ TX1, your workers will be the safest single gas detector users in the world “ “GASESANALYSEDCO SO2 H2SNO2 Cert No. 996ISO 900111 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.comTECHNICALSPECIFICATIONGAS RANGES• Carbon Monoxide (CO): 0 to 1,000 ppm in 1.0 ppm increments• Hydrogen Sulphide (H2S): 0 to 200 ppm in 0.1 ppm increments• Nitrogen Dioxide (NO2): 0 to 150 ppm in 0.1 ppm increments• Sulpur Dioxide (SO2): 0 to 150 ppm in 0.1 ppm incrementsPHYSICAL• Dimensions: 99 x 51 x 35 mm (3.9” x 2.0” x 1.4”)• Weight: 126.0 g (4.4 oz.)• Case top: Polycarbonate with a protective rubber• Case bottom: Conductive polycarbonatePOWER• 3.6 V Primary lithium-thionyl chloride (Li-SOCl2), 1.5Ah, 2/3AA, replaceable & non-rechargeableALARMS • Audible alarm: 100 decibel (dB) audible alarm at a distance of 10 cm (3.94”)• Visual alarm: Three strobe-emitting visual alarm LEDs (two red; one blue)• Vibrating alarm: StandardPERFORMANCE • Operating temperature range: –20°C to +50°C (-4°F to +122°F)• Operating humidity range: 15%-95% Non-condensing (continuous)APPROVALS• ATEX: Ex ia I Ma, Ex ia IIC T4 Ga, Equipment Group and Category: I M1 and II 1G• IECEx :Ex ia I Ma Ex ia IIC T4 Ga• UL (C-US): Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; T4; Exia Class I, Zone 0, AEx ia IIC T4ORDERINGINFOPart Number DescriptionTX1-1 Tango TX1, COTX1-2 Tango TX1, H2STX1-4 Tango TX1, NO2TX1-5 Tango TX1, SO218109201 iNet DS docking station for Tango*17154367 Replacement battery18109171 Soft nylon case, Black18109239 Soft nylon case, Orange18109218 Dust barrier kit, 5 pack18109230 Water barrier kit, 5 pack17120908 Belt clip17154915 AlarmAmp™*Access to data from the iNet DS docking station requires a subscription to iNet or iNet InSite.