TAPI - Model 200EU - Ultra-Sensitive Chemiluminescent NO/NO2/NOX Analyzer (Trace Level) Brochure

FREE Customer Support by telephone and email for the life of the instrumentThe Model 200EU is based on the field-proven Model200E Chemiluminescence Analyzer for measurement ofNO-NO2-NOX. The Model 200EU offers sensitivity rangesof 0-5 ppb to 0-2000 ppb, with a lower detectable limit of50 ppt. This sensitivity is coupled with improved noiseand drift specifications for the most demanding ultra-lowlevel measurements.The time-proven, dependable design of the Model200E has been combined with an enhancedperformance pump and a special low noise photo-multiplier tube for greatly improved performance. Inaddition, a pre-reactor separates the NO-NO2 reactionfrom the background chemiluminescence, allowingaccurate auto-zeroing of the analyzer. The overall effectof these enhancements is an improved signal-to-noiseratio allowing much more sensitive measurements andminimizing interferences.Like all instruments in the TAPI E Series, the Model200EU includes built-in data acquisition capability usingthe analyzer's own internal memory. This allows thelogging of multiple parameters including averaged orinstantaneous concentration values, calibration data, andoperating parameters such as pressures and flow rates.Stored data are easily retrieved through the serial portor optional Ethernet port via APIcom or from the frontpanel, allowing the operator to perform predictivediagnostics and enhanced data analysis by trackingparameter trends.Multiple averaging periods of one minute to one dayare available automatically or manually. The Model200EU can be used with an external NOy converter formeasuring reactive oxides of nitrogen.? Standard two year warranty? Ranges, 0-5 ppb to 0-2000 ppb, userselectable? Independent ranges for NO, NO2, NOX? Lower Detectable Limit of 50 ppt? Replaceable moly converter cartridge? Temperature & Pressure compensation? Catalytic ozone scrubber? Digital status outputs provide instrumentoperating condition? Adaptive signal filtering optimizes responsetime? Continuous self checking with alarms? Continuous automatic zero correction? Bi-directional RS-232 ports for remoteoperation (optional RS-485 or Ethernet)Ultra-Sensitive NO/NO2/NOXAnalyzerMODEL 200EUFor more information about the Teledyne APIfamily of monitoring instrumentation products,call us or visit our website atwww. t e l e d y n e - a p i . c om9480 Carroll Park Drive ¦ San Diego, CA 92121-5201Ph. 858-657-9800 Fax 858-657-9816Email api-sales@teledyne.comRanges: 0-5 ppb to 0-2000 ppb full scale, userselectable, independent NO, NO2, NOX rangesand autoranging supportedUnits: ppb, µg/m3Zero Noise: < 25 ppt (RMS)Span Noise: < 0, 25% of reading (RMS) above 50 ppbLower Detectable Limit (LDL): 50 pptZero Drift: < 0.1 ppb/24 hours, <0.2 ppb/7 daysSpan Drift: < 0.5% of reading/24 hours, <1% of reading/7 daysLag Time: <20 secondsRise and Fall Time: < 50 seconds to 95%Linearity: 1% of full scalePrecision: 0.5% of reading above 50 ppbSample Flow Rate: 1000 cc/min ±10%Operating Temperature Range: 5 - 35°CDimensions (HxWxD): 7” (178 mm) x 17” (432 mm) x 23.5” (597 mm)Weight: Analyzer 40 lbs (18 kg)External Pump 21 lbs (9.5 kg)Power: 100V - 120V, 220V - 240V, 50/60 Hz, 275WAnalog Outputs: 10V, 5V, 1V, 0.1V, selectableRecorder Offset: ±10%Serial Outputs: Serial Port 1: RS-232 (DB-9M)Serial Port 2: standard RS-232 or optionalRS-485 (DB-9F), EthernetStatus (Digital) 8 outputs, 6 inputs (opto-isolated), 4 alarmoutputs (optional)Current Output: Optional 4-20mA, select up to three channelsApprovals: CENOTE: The values expressed above are in accordance with EPA definitions. All errorspecifications are based on constant conditions. Specifications exceed US EPA andEignungsgeprüft requirements.Model 200EU Ultra-Sensitivity NO, NO2,NOx Analyzer includes:¦ Standard two year warranty¦ External pump¦ Independent NO, NO2, NOX ranges¦ Auto ranging¦ 47mm diameter particulate filter¦ 8 digital status outputs, 6 inputs¦ Bi-directional RS-232¦ APIcom remote control softwareSpecify input AC voltage & frequency:? 100V - 115V ? 50Hz? 220V - 240V ? 60HzSpecify output DC voltage:? 10V ? 5V ? 1V ? 0.1VOptional Equipment:? Rack mount brackets (19”) with chassis slides? Rack mount brackets only? 4-20mA outputs (specify up to three. channels)?Multi-drop RS-232 connection? Ethernet port includes 7 ft. CAT-5 cable .. (disables one serial port)Calibration Valves:? Stainless steel valves for selection of. customer-supplied zero and span gasAccessories:? RS-232 Cable? Expendables Kit? Spare Parts Kit? Chassis carrying handleUltra-SensitiveNO/NO2/NOX AnalyzerSchematicSpecificationsHow to OrderMODEL 200EUSpecifications subject to change without notice. Printed documents are uncontrolled. SAL000008 A (DCN 5058) M200EU/08/08/08.