Tilt Mixers MCG- Brochure

www.aaronprocess.com ph: 630-350-2200 | fx: 630-350-9047 sales@aaronprocess.com Custom and Standard Industrial Mixers for Powders, Solids and Difficult, Viscous, Non-Flowing Materials ® 2 of repairing, refurbishing and rebuilding mixers produced by leading OEMs in the U.S. and Europe, we determined the strengths and weaknesses of many of the mixer designs. It was from this accumulated experience that the AARON PROCESS EQUIPMENT COMPANY was launched with a very simple mission: Since then, we have refined our mission to emphasize service & commitment and we have included state-of-the-art electronic controls. we still offer the industry’s best value mixers— proven for the most difficult and challenging materials. Aaron Process Equipment Company is recognized for designing and manufacturing the most advanced line of quality mixing and blend- ing machinery in the Industry. Aaron Process offers a complete line of Sigma Blade Mixers, Mixer Extruders, Food Grade Stainless Steel Batch Mixers, Plow Mixers, FDA approved Sanitary Ribbon Blenders, Planetary Mixers, and Laboratory style mixers. All of our mixers are available in many sizes and come with standard design features and custom options. You should also know that: • Aaron Process maintains a large inventory of replacement parts to assure immediate delivery if needed. • Our shop has total capabilities to rebuild or remanufacture any mixers you have. • We accept trade-ins toward your purchase of Aaron Process Mixing Equipment. After decades to build the best, most rugged and most dependable, engineered mixers in the world Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com www.aaronprocess.com Mixer Extruder with New TriMax® Gearbox page 8 Mixer Extruder with Standard Gear Case page 7 Batch Mixer with Hydraulic Tilt page 4 Batch Mixer Lo-Boy® Design page 6 Batch Mixer Bottom Dump page 5 Batch Mixer Split Level® Design page 9 Lab and Pilot Scale Equipment page 10 Blade Selection page 11 Custom Designs & Quality Control page 12 Reconditioning Services page 13 Double Arm Mixer Replacement Parts page 14 Ribbon Blenders page 15 period Today, Choose from two classes of mixers… Heavy Duty or Extra Heavy Duty. mixers are designed for mixing, blending and kneading medium to high-density solids materials. We can even handle mixing your most difficult, sticky, tacky, viscous products. We know, because we’ve been doing it for more than 50 years. Aaron Process Adhesives Batteries Biological Products Building Materials Catalysts Caulks Cellulose Ceramics Clay Composites Compounds Confections Explosives Fiberglass Flooring Food Stuffs Graphite Gums Inks Joint Compounds Lacquers Natural Rubbers Nutraceuticals Paint & Coatings Pastes Pigments Plastics Plastic Lumber Polyesters Powders Puttys Resins Roofing Rubber Products Sand Sealants Silicones Silicone Rubber Soaps Toothpaste Vinyl Materials Vitamins Wood Wood Composites Our mixers are used to manufacture: 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com 4 Batch Mixer With Hydraulic Tilt MCG This standard height Double Arm Mixer with rugged hydraulic tilt for discharge was the first of Aaron’s mixer line. Engineered to incorporate the best features used in the industry, it offers unsurpassed performance—the advantages of proven features, the widest selection of options available, and the technical knowledge that comes from decades of experience. ¦ Standard ASME jackets for heating (or cooling). ¦ Capable of vacuum operation with optional cover kit. ¦ Also available in 10 gallon and 50 gallon pilot capacities. ¦ Available in sizes over 1000 gallons. 600 Gallon with Vacuum Cover 50 Gallon, Unitized with Cover 50 Gallon with Hydraulic Ram Cover Large Capacity Mixers Model MCG200 Total Capacity 390 Gallons / 1476 Liters Mixing Capacity 200 Gallons / 758 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 7.5 HP (5.6 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Tilt Angle 107º Model MCG300 Total Capacity 450 Gallons / 1703 Liters Mixing Capacity 300 Gallons / 1135 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MCG400 Total Capacity 670 Gallons / 2536 Liters Mixing Capacity 400 Gallons / 1515 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MCG500 Total Capacity 820 Gallons / 3104 Liters Mixing Capacity 500 Gallons / 1893 Liters Blade Motor 200–300 HP (150–224 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MCG600 Total Capacity 1250 Gallons / 4731 Liters Mixing Capacity 600 Gallons / 2271 Liters Blade Motor 250–400 HP (189–298 KW) Power Pack 15 HP (11 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Tilt Angle 107º Model MCG900 Total Capacity 1780 Gallons / 6738 Liters Mixing Capacity 900 Gallons / 3407 Liters Blade Motor 250–400 HP (189–298 KW) Power Pack 15 HP (11 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Tilt Angle 107º Model MCG100 Total Capacity 200 Gallons / 757 Liters Mixing Capacity 100 Gallons / 378 Liters Blade Motor 60–100 HP (45–75 KW) Power Pack 7.5 HP (5.6 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Tilt Angle 102º Also Available in 10 and 50 Gallon Capacity | Contact an Aaron Process Sales Associate for larger size machines. Model MCG150 Total Capacity 340 Gallons / 1287 Liters Mixing Capacity 150 Gallons / 568 Liters Blade Motor 75–125 HP (56–93 KW) Power Pack 7.5 HP (5.6 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Tilt Angle 107º 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com 5 Batch Mixer Bottom Dump MBG Our most economical unit is a true workhorse which combines all the basic advantages from our line of double arm mixers. A wide variety of applications are able to take advantage of our bottom discharge arrangement. ¦ Suitable for mixing and drying of heat-sensitive materials that undergo phase changes during processing, such as liquids, plastics, and powders. ¦ Flush bottom doors for complete mixing action. ¦ Lower maintenance costs result from the absence of connecting gears and additional room is provided to access the gland and packing areas outboard of the mixing shafts. 400 Gallon Bottom Dump with Hydraulic Flush Bottom Doors and TriMaxTM Gearbox Exclusive “MXT” Gearbox Control Panel for Operation of Hydraulic Doors TriMaxTM Gearbox Model MBG200 Total Capacity 390 Gallons / 1476 Liters Mixing Capacity 200 Gallons / 758 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 7.5 HP (5.6 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Tilt Angle 107º Model MBG150 Total Capacity 340 Gallons / 1287 Liters Mixing Capacity 150 Gallons / 568 Liters Blade Motor 75–125 HP (56–93 KW) Power Pack 7.5 HP (5.6 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Tilt Angle 107º Model MBG300 Total Capacity 450 Gallons / 1703 Liters Mixing Capacity 300 Gallons / 1135 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MBG400 Total Capacity 670 Gallons / 2536 Liters Mixing Capacity 400 Gallons / 1515 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MBG500 Total Capacity 820 Gallons / 3104 Liters Mixing Capacity 500 Gallons / 1893 Liters Blade Motor 200–300 HP (150–224 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model MBG600 Total Capacity 1250 Gallons / 4731 Liters Mixing Capacity 600 Gallons / 2271 Liters Blade Motor 250–400 HP (189–298 KW) Power Pack 15 HP (11 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Tilt Angle 107º Model MBG900 Total Capacity 1780 Gallons / 6738 Liters Mixing Capacity 900 Gallons / 3407 Liters Blade Motor 250–400 HP (189–298 KW) Power Pack 15 HP (11 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Tilt Angle 107º 6 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Batch Mixer Lo-Boy® Design WCG Aaron’s unique Lo-Boy® Design represents a true breakthrough in the engineering of equipment for processing large batches in the most compact equipment available. The ultra-clean design minimizes both floor space and head room required. ¦ Unitized Design allows installation in areas unable to accommodate standard mixers. ¦ Less need for structural supporting platforms. ¦ Can be furnished with belt drive (up to 250 hp) or with direct connected motor and gearbox arrangement. ¦ Still allows ample room to access gland area and perform maintenance of shaft packing. 500 Gallon Lo-Boy® Double Arm Mixer Ask about optional features to meet your requirements. Twin Hydraulic Tilt Cylinders Heavy Duty Sigma Blades Range of motion of the NEW 500 Gallon Lo-Boy® Double Arm Mixer Model WCG300 Total Capacity 450 Gallons / 1703 Liters Mixing Capacity 300 Gallons / 1135 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model WCG400 Total Capacity 670 Gallons / 2536 Liters Mixing Capacity 400 Gallons / 1515 Liters Blade Motor 150–250 HP (112–189 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model WCG500 Total Capacity 820 Gallons / 3104 Liters Mixing Capacity 500 Gallons / 1893 Liters Blade Motor 200–300 HP (150–224 KW) Power Pack 10 HP (7.5 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Tilt Angle 102º Model WCG600 Total Capacity 1250 Gallons / 4731 Liters Mixing Capacity 600 Gallons / 2271 Liters Blade Motor 250–400 HP (189–298 KW) Power Pack 15 HP (11 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Tilt Angle 107º 7 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Mixer Extruder With Standard Drive MXG The Aaron Process Mixer Extruder is designed to offer the advantages of a screw discharge for the more difficult, non-flowing materials that are encountered in the chemical, food, drug, plastics, and rubber industries. The screw “extruding” discharge arrangement offers improved ease of discharge compared to traditional tilt or bottom discharge arrangements. ¦ “Mixtruder” discharge arrangement is engineered to overcome any clogging or obstruction. ¦ Extrusion/discharge rates will depend on product processed and any die configuration utilized at the end of the extruder barrel. ¦ Also available in Pilot Size units. Mixer Extruder with Non-Cored Blades Unitized Construction Mixer Extruder with AC Drives on Blades and Screw Variable Drive Options Model MXG150 Total Capacity 240 Gallons / 908 Liters Mixing Capacity 150 Gallons / 568 Liters Blade Motor 50–100 HP (37–75 KW) Screw Motor 30–50 HP (25–37 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXG200 Total Capacity 300 Gallons / 1135 Liters Mixing Capacity 200 Gallons / 758 Liters Blade Motor 75–125 HP (56–93 KW) Screw Motor 30–50 HP (25–37 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXG300 Total Capacity 450 Gallons / 1703 Liters Mixing Capacity 300 Gallons / 1135 Liters Blade Motor 150–250 HP (112–189 KW) Screw Motor 50–100 HP (37–75 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXG400 Total Capacity 670 Gallons / 2536 Liters Mixing Capacity 400 Gallons / 1515 Liters Blade Motor 150–250 HP (112–189 KW) Screw Motor 50–100 HP (37–75 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXG500 Total Capacity 820 Gallons / 3104 Liters Mixing Capacity 500 Gallons / 1893 Liters Blade Motor 200–300 HP (150–224 KW) Screw Motor 75–125 HP (56–93 KW) Blade Speed 30 RPM (Front) / 17 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXG900 Total Capacity 1780 Gallons / 6738 Liters Mixing Capacity 900 Gallons / 3407 Liters Blade Motor 250–400 HP (189–298 KW) Screw Motor 100–150 HP (75–112 KW) Blade Speed 28 RPM (Front) / 16 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Ask about optional features to meet your requirements. 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com 8 Mixer Extruder With New TriMax® Gearbox MXT This Aaron Process Mixer Extruder comes with the proven advantages of the screw discharge arrangement and also offers the benefits of the TriMax® Gearbox and its Triple Output Shaft design. ¦ Lower maintenance costs result from the absence of connecting gears and additional room is provided to access the gland and packing areas outboard of the mixing shafts. ¦ Elimination of the connecting gear case reduces floor space requirements. ¦ Unitized construction eases installation costs. ¦ Capable of mixing materials with viscosities in excess of 10,000,000 centipoise 300 Gallon Mixer Extruder with TriMax® Gearbox Blades and Screw with Product Deflector 300 Gallon Mixer Extruder with TriMax® Gearbox TriMax® Gearbox Model MXT150 Total Capacity 240 Gallons / 908 Liters Mixing Capacity 150 Gallons / 588 Liters Blade Motor 75–125 HP (56–93 KW) Screw Motor 30–50 HP (25–37 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXT200 Total Capacity 300 Gallons / 1135 Liters Mixing Capacity 200 Gallons / 758 Liters Blade Motor 75–125 HP (56–93 KW) Screw Motor 30–50 HP (25–37 KW) Blade Speed 44 RPM (Front) / 25 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXT300 Total Capacity 450 Gallons / 1703 Liters Mixing Capacity 300 Gallons / 1135 Liters Blade Motor 150–250 HP (112–189 KW) Screw Motor 50–125 HP (37–93 KW) Blade Speed 30 RPM (Front) / 19 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXT400 Total Capacity 670 Gallons / 2536 Liters Mixing Capacity 400 Gallons / 1515 Liters Blade Motor 150–250 HP (112–189 KW) Screw Motor 75–125 HP (56–93 KW) Blade Speed 30 RPM (Front) / 19 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXT500 Total Capacity 820 Gallons / 3104 Liters Mixing Capacity 500 Gallons / 1893 Liters Blade Motor 200–300 HP (150–224 KW) Screw Motor 75–125 HP (56–93 KW) Blade Speed 30 RPM (Front) / 19 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Model MXT900 Total Capacity 1780 Gallons / 6738 Liters Mixing Capacity 900 Gallons / 3407 Liters Blade Motor 300–500 HP (224–373 KW) Screw Motor 100–150 HP (75–112 KW) Blade Speed 28 RPM (Front) / 17 RPM (Rear) Screw Speed 60 RPM (Bi-Rotational) Ask about optional features to meet your requirements. 9 Batch Mixer Split Level® Design Batch Mixer Food Grade S/S Design ZBG Aaron’s Split Level® 750 Gallon design has approximately 50% more effective mixing and heat transfer area as compared to conventional designs. A thorough mixing action is assured by the shape of the bowl and the close tolerance between the mixing blades and the bowl. Because one blade arm is positioned offset and above the other, only one discharge outlet is required. Aaron Double Arm Mixers can be designed for sanitary applications with all stainless construction, high polish, USDA approved components, wash down controls and can be engineered and tailored to a specific set of requirements. 750 Gallon Split Level® Design Sigma Blades Mounted One Above/One Below Jacketed Bowl, Heated Discharge Valves Cored Blades and Vacuum Encapsulated Shaft Seals 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Model ZBG-750 Bottom Discharge Total Capacity 1100 Gallons / 4175 Liters Mixing Capacity 750 Gallons / 2840 Liters Drive Available in belt drive and direct coupled drives up to 300 horsepower. Other options available are hydraulic powered. Blade Speed 35 RPM (Front) / 38 RPM (Rear) Discharge 12" Flanged Outlet Seals Standard Packing Glands Blades Sigma Design Construction T304 S/S Material Standard. Other material of construction available. Ask about optional features to meet your requirements. 10 Lab and Pilot Scale Equipment LNG Aaron’s Lab Batch Mixer is furnished in three sizes with a manual hand tilt for discharge. Different mixer blades are interchangeable for studying results provided by different blade configurations. Variable speed drive arrangements are standard. 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Model LNG .25 (.25 Gallon) Total Capacity .5 Gallon / 2 Liters Mixing Capacity .25 Gallon / 1 Liter Drive .75 HP (1KW) Direct Drive Gearmotor Blade Speed 0-70 RPM (Front) / 0-40 RPM (Rear) Discharge Manual tilt over front bearing journal Jacket Suitable for steam, water or hot oil operation Seals Standard Packing Glands Controls 1PH / 115 volts / AC controller with run / jog, start / stop, forward / reverse and variable speed control adjustment, 90 volt DC motor. Chamber Suitable for full vacuum operation Blades Available in Sigma or Dispersion style Model LNG 1 (One Gallon) Total Capacity 2.3 Gallons / 8.7 Liters Mixing Capacity 1 Gallon / 3.7 Liters Drive 2 HP (2.7 KW) Direct Drive Gearmotor Blade Speed 0-70 RPM (Front) / 0-40 RPM (Rear) Discharge Manual tilt over front bearing journal Jacket Suitable for steam, water or hot oil operation Seals Standard Packing Glands Controls 1PH / 115-230 volts / AC controller with run / jog, start / stop, forward / reverse and variable speed control adjustment, 180 volt DC motor. Chamber Suitable for full vacuum operation Blades Available in Sigma or Dispersion style Model LNG 2 (Two Gallon) Total Capacity 3.75 Gallons / 14 Liters Mixing Capacity 2 Gallons / 7.5 Liters Drive 2 HP (2.7 KW) Direct Drive Gearmotor Blade Speed 0-70 RPM (Front) / 0-40 RPM (Rear) Discharge Manual tilt over front bearing journal Jacket Suitable for steam, water or hot oil operation Seals Standard Packing Glands Controls 1PH / 115-230 volts / AC controller with run / jog, start / stop, forward / reverse and variable speed control adjustment, 180 volt DC motor. Chamber Suitable for full vacuum operation Blades Available in Sigma or Dispersion style Ask about our Rental Program for your testing or R&D needs. We can help with your scale-up issues. 11 Blade Selection Blades are available in different styles. The appropriate selection is determined from the flow characteristics and physical consistencies of the materials to be processed. Blades can be optionally constructed with cored interiors for cooling or heating. Blade Arrangement The blades can be arranged tangentially (with optional rotation ratio) or overlapping (1:1 rotation ratio). Dispersion Blades Provides a smooth folding action and is excellent for mixing a fiber reinforced product. Available in 135 degree or 180 degree spiral. 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Sigma Blades The most widely used blade for the process industry. Masticator Blades Used for a superior dispersion of difficult products such as rubber, plastics or abrasive materials. Naben Blades Also known as the Fishtail Blade. Suitable for mixing cellulose materials. Tangential Overlapping Figure 1 Figure 2 Figure 1: Illustrates the tangential style. The paths of the blades do not cross, therefore, the speed of each blade can be randomly set. This arrangement is often used when super-high-viscosity materials are mixed. Figure 2: Illustrates the overlapping style. The path of the two blades cross, therefore, the blades are arranged so that they do not touch each other and the rotation ratio is 1:1. This arrangement is primarily used for mixing or processing of medium- to high-viscosity materials. Blades are constructed from cast steel, cast stainless steel, or other alloys. 12 Custom Designs & Control Systems 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com The Mixer Extruder, Standard Hydraulic Tilt, Lo-Boy® and Bottom Dump models can be furnished with hydraulic motors mounted directly to each mixer shaft. This extraordinary flexible design enables you to alter each blade speed independently and adapt to batch viscosity at different stages of your process cycle. This allows for progressive speed increase during start-up under full load, as well as blade reversal for aiding discharge. Mixer Extruder with independent Blade and Screw Drives Custom Design Shown with AC Motors Floating Ram keeps material within the mixing zone. Aaron Process makes sure that all rotating components on their equipment are well guarded to ensure operator safety. Custom Control Panels Electronic controls are tailored to meet your requirements. 13 Reconditioning Services 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Let Aaron Process Equipment Company rebuild your existing double arm mixing equipment. Rebuilding your current mixers can save you money and increase your return on investment. Old, worn out machinery can inflate your operating cost thru additional maintenance and repair…not to mention utility costs. Aaron Process Equipment Company takes pride in manufacturing NEW, quality mixing equipment for many different industries and applies these standards when rebuilding existing equipment from your plant. We offer different degrees of repair: from replacing worn out bearings, seals & shafts to complete equipment reconditioning. With more than 50 years of experience, the experts at Aaron Process can help assist with the evaluation of your mixing needs, rebuilding or remanufacturing of an existing mixer, trade-in for a new mixer or your next purchase of a new or newly remanufactured double arm mixer, ribbon blender or plow mixer. Aaron can rebuild virtually any make or model double arm mixer. Mixer manufacturers include: Baker Perkins Littleford Day (J.H. Day) AMK Werner & Pfleiderer Readco Paul O. Abbé Jaygo Guittard Aoustin Winkworth Linden Fritz Meili Bramley Moriyama Polishing Machining Turning Fabricating Baker Perkins, Littleford Day (J.H. Day), AMK, Werner & Pfleiderer, Readco, Paul O. Abbé, Jaygo, Guittard, Aoustin, Winkworth, Linden, Fritz Meili, Bramley, Moriyama are all Registered Trademarks 14 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Double Arm Mixer Replacement Parts Aaron Process Equipment Company carries complete spare parts and replacement parts in stock for all of our mixing and blending machinery. For special requirements, send us your drawings or describe your needs and we can quote you on engineering new replacement parts. Aaron Process is one of the industry’s leading OEMs of Mixing, Blending and Drying processing machinery with very competitive pricing and a support staff ready to take your parts order Contact our Parts Department for more information on our spare parts and equipment reconditioning services. 630-350-2200 www.aaronprocess.com 15 Ribbon Blenders IMB AARON PROCESS has developed a new T304SS Ribbon Blender that offers the value demanded for today’s mixing requirements. The versatility of the Standard Aaron Process Ribbon Blenders is valued by many industries including Chemical, Food, Plastics, Spices, Flavorings, Cosmetics, Nutraceuticals, and other specialty applications. The New Standard Aaron Process T304SS Ribbon Blenders are offered with a “double” ribbon design and high polish on all product contact surfaces. Designed to be a workhorse for materials with density up to 75 lbs per cubic foot or more, they include: ¦ Stainless Steel Split Packing Glands ¦ Split Two-Piece Cover and Safety Grate ¦ Center Discharge—Manual or Pneumatic ¦ TEFC Gearmotor with Chain Drive ¦ Can be Integrated with Material Handling Systems. NR For more demanding applications, Aaron Process has a Heavy-Duty line of Ribbon Blenders. Also available in T304SS and with high polish, these Ribbon Blenders are reinforced with external stiffeners and driven by higher horsepower using a shaft-mounted drive arrangement suited for heavier materials. Units can be configured for center or end discharge with options among a variety of manual or pneumatically controlled discharge arrangements and valves. ¦ Available with Double Ribbons, Split Ribbons or Paddles. ¦ Optional Jacket for Heating or Cooling. 735 E. Green Street, P.O. Box 80, Bensenville, IL 60106 • Phone: (630) 350-2200 • Fax: (630) 350-9047 Email: sales@aaronprocess.com • www.aaronprocess.com Sanitary Finishes Diamond Support Posts ® Aaron Process Equipment Company | 735 E. Green St. | P.O. Box 80 | Bensenville, IL 60106 Phone: 630-350-2200 | Fax: 630-350-9047 | sales@aaronequipment.com | www.aaronprocess.com www.aaronprocess.com Custom and Standard Industrial Mixers for Powders, Solids and Difficult, Viscous, Non-Flowing Materials