TMS - LC-300 - Well Level Indicator Brochure

www.levelcom.net • Easy Installation and Setup • Monitors without electronics (sensors) or electricity in liquid • Eliminates replacement costs due to failed pressure transducers • 4 Alarm set points— high to low • Control Relays • Displays Depth, Weight or Volume-English or Metric • Long service life with low maintenance • Automatic sensor zero Engineered to provide accurate and reliable liquid level measurements for wells with depths to 2000 feet. Long service life and low maintenance. Eliminates costly well tear downs and rebuilds to replace faulty sensors and cables. • Municipal Wells • Mining • CBM • Pollution • Agriculture • Ground Water LC-300 Well Level Indicator The LC-300 is the TMS ultra deep well monitoring solution. Using “Advanced Bubbler Technology”, a microprocessor based system with the accuracy and dependability of a hydrostatic bubbler, with self diagnostics, RS 485 communication and several other options. The rugged design of the LC-300 works in conditions and liquids where other technologies will not work or have a short life expectancy. • Continuously and accurately monitors water levels providing analog or digital output. Compatible with telemetry, control and SCADA systems • Self diagnostic—automatically monitors gas cylinder pressure, de-tects leaks and plugs in the well sense line • Continuously monitors well head pressure for accuracy • Modbus RTU 485 / Ethernet communication provide digital data to HMI or SCADA Systems • Wireless LAN communication available LC-300 FEATURES LevelCom’s “Advanced Bubbler Technology” Installation requires connection to an air supply, electrical power source and bubbler tube. Only the stationary bubbler tube and the purge gas come in contact with the liquid making this system ideal for well applications involving polluted, hot, hazardous, corrosive liquids and slurries. All controls are above ground making maintenance and service quicker, safer and more economical, eliminating the need for costly well tear downs. For hazardous area installation, the LC-300 controls can be located up to 600 feet away from the well head. The pneumatic tubing isolates the hazardous from the safe area. The LC-300 automatically zeros its sensor to atmosphere every 30 minutes. The bubbler tube is purged at regular intervals to keep the line clear. Self-diagnostics check the system for both pneumatic and electronic faults. If a problem is found, the LC-300 displays the appropriate error message or activates an alarm to alert the operator. All values and alarm set points are displayed in either English or Metric units of measure, (depth, volume or weight) on the digital display. The LC-300 options include, analog output (4-20 mA), Modbus, Profibus, Ethernet and Wireless communication. Applications • Municipal Water • CBM (Coal Bed Methane) • Polluted / Hazardous • Mining • Lakes • Reservoirs • Ground water • Eliminates the need for down hole sensors: only nylon or stainless steel tubing goes down the well • All the electronics are above ground out of the well, greatly reducing maintenance costs • Annulus Offset: accurate levels under pressure Power 120VAC / 100mA / Fuse — 2A; 50/60 Hz Supply Gas Compressed Nitrogen (N2) depending on well depth Temperature Operating range: -30° F to +140° F (-34.4° C to +60° C) Enclosure UL listed NEMA 4X, non metallic, several door options Display 6 digit alpha numeric display, LED status indicators Dimensions 14.5” (37cm) H x 5.5” (14cm) W x 3.8” (9.6cm) D Linearity (BFSL) Less than or equal to +/- 0.5% Hysteresis Less than 0.25% FSO Humidity 5—95% RH non-condensing Alarm Set Points Four (4) programmable internal set points (Relay option required for remote alarm activation) Control Set Points Four (4) programmable set points (Control 1 & 2 On/Off) (Relay option required) OPTIONS 0—2000 610 Communication RS 485 Modbus Profibus Modbus TCP/IP Wireless Alarm & Control Relays 4 programmable internal set points, Control 1 & 2, On / Off; 2 — SPDT Form C relays (“rated “Pilot Duty”) Analog Output 4 to 20 mA SPECIFICATIONS Depth Range — Ft. Meters www.levelcom.net A division of 6040 N. Cutter Circle Suite # 302 Portland, OR 97217 Phone: 503-285-8947 Fax: 503-285-1379 Email: info@levelcom.net TMS is the leader in developing and refining pulsed bubbler and tank monitoring technology for over the past 18 years. LevelCom products have earned a reputation for being a very accurate, dependable monitoring systems with a very long trouble free service life. THE LEVELCOM ADVANTAGE # LC1002012 Represented by: One LevelCom LC-300 replaces: • Pressure Transducer • Vented cable • Signal Amplifier • Panel Meter /Display