Toro - P-220S - Scrubber Series for Precise, Pressure Control Brochure

P-220 Scrubber SeriesEffluent OptionsAvailableValvesA true dirty water irrigation valve, able to handle chlorine and other chemicals found in reclaimed and other non-potable water systems. Constructed of heavy-duty, glass-filled nylon and EPDM rubber materials, these valves resist clogging and feature a patent-pending active scrubbing mechanism (ACT™ System) to actively fight sand, algae and other particles from blocking the proper metering through the valve.Features & BenefitsDurable Glass-Filled NylonEnsures the P-220 can operate at pressures up to 220 psi.Acting Cleansing Technology (ACT™)Industry’s first active scrubber valve cleans continuously whereas competitive valves only clean on opening and closing.Fabric-reinforced EPDM Diaphragm and EPDM SeatDesigned to work in virtually all water applications.Rugged Internal Plastic And Stainless Steel PartsScrubber fan, nut and metering system are designed with marine and aerospace plastics and metals which make them resistant to water treated with chlorines and ozones.Precise Pressure Regulation OptionCompact EZReg® dial-design technology ensures precise downstream pressure for optimizing sprinkler head performance.Completely Serviceable and Retrofitable Diaphragm assembly may be replaced or retrofitted to previous models.www.toro.comThe Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA • 92504 • 877-345-8676Specifications subject to change without notice. For more informa-tion, contact your local Toro distributor. ©2009 The Toro Company. All rights reserved. P/N 09-1069-IRCP-220 Scrubber SeriesS p e c i f y i n g I n f o r m a t i o n — P 2 2 0 SP220SX-2X-X-XModel Activation Type Solenoid SizeP220S 2X X XP220S—P-220S Scrubber Series Plastic Valve26—NPT, Electric27—NPT, Pressure- regulatedEZR-100 (Standard)0—Standard Solenoid9—DC Latching Solenoid8—2” 0—3” Example: A 2” P-220S Series plastic electric, pressure-regulating valve would be specified as: P220S-27-08Dimensions• 2” – 9 ½” H x 6 1/8” W• 3” – 10 ¾” H x 6 1/8” WOperating Specifications• Flow Range: – 2” – 80 to 180 GPM – 3” – 150 to 300 GPM• Operating Pressure (220 psi maximum pressure rating): – Electric – 20 to 220 psi• Pressure regulating: – Outlet (EZR-30): 5 to 30 psi ± 3 psi – Outlet (EZR-100): 5 to 100 psi ± 3 psi• Inlet: 10 to 220 psi• Minimum pressure differential (between inlet and outlet) for pressure regulation: 10 psi• Body styles: – Globe/Angle – 2”, 3” female threads• 102-5073 Solenoid: 24 VAC (50/60 Hz) Standard – Inrush: 60 Hz: 0.4 amps – Holding: 60 Hz: 0.2 ampsModel Description• P220S-26-08 • P220S-26-00• P220S-27-08 • P220S-27-00• P220S-KIT-08• P220S-KIT-00P-220, 2” with ACT™ SystemP-220, 3” with ACT™ SystemP-220, 2” with EZReg® and ACT™ SystemP-220, 3” with EZReg® and ACT™ System2” Scrubber diaphragm assembly kit3” Scrubber diaphragm assembly kitThe P-220S ScrubberThe new P-220 Scrubber Valves have the patent-pend-ing ACT™ System – Active Cleansing Technology – in which the durable turbine is constantly rotating to clean the metering/filtration area. This continual cleaning en-sures that dirt, algae, chlo-rines, chloramines and water treated with ozone will not impede valve performance.P-220 Series Friction Loss DataSize Config. GPM Flow5 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 225 250 275 3001" GlobeAngle4.004.004.204.203.203.104.102.707.204.8011/2" GlobeAngle1.601.302.301.603.602.805.204.007.005.509.207.1011.208.9013.6010.9016.4013.502" GlobeAngle2.101.20 2.70 1.603.302.004.002.404.802.805.603.306.503.907.504.408.705.203" GlobeAngle2.501.903.002.404.103.305.304.306.705.508.306.9010.10 8.50Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure. For optimum regulation performance, size regulating valves toward the higher flow ranges.Flow rates are recommended not to exceed 5 psi loss.Options Available• EZR-30 - EZReg, 5–30 psi Regulator Module • EZR-100 - EZReg, 5–100 psi Regulator Module • EFF-KIT-60 Hz - Effluent Water (Lavender) Solenoid Assembly (24 VAC, 60 Hz) and Warning Tag • 102-5073 - 24 VAC Solenoid Assembly, 60 Hz, 18” Leads, Captive Plunger • DCLS-P - Potted DC Latching Solenoid Assembly Warranty• Five yearsAdditional features• Tough glass-filled nylon and stainless steel construction• Internal and External bleed• Pressure regulates in electric or pressure-regulating models• No external tubing for either pressure-regulating model• Standard, built-in Schrader-type valve for downstream pressure verification• Flow control independent of solenoid• Self-aligning bonnet to ensure correct installation• Self-cleaning, stainless steel metering rod• Low-flow capability down to 5 GPM with EZReg®Filter Surface“Scrubber” TurbineSpecifications