TR2 Ultra UV Datasheet

The TR2 series of ultraviolet units are designed to provide residential swimming pools and spas with a cost effective UV system for disinfection and improved water quality.APPLICATIONS• Swimming Pools and Spas• Ponds• Water FeaturesMAIN CHARACTERISTICS• Easy to install and operate, suitable for both indoor and outdoor installationMAIN FEATURES• Low pressure UV• Low capital and electrical running costs• 18 month UV lamp life• Reduction in chemical requirement• Improved algae control• 100% corrosion resistant UV inhibited polymeric reactor vessel• Automatic pre-set internal flow sensor switch shuts down on no flow• Centre ring indicates lamps are operational when switched onUV TECHNOLOGYThe TR2 range is designed for disinfection of residential pool and spa water and provides cost effective treatment and improved water quality. Two, three or four low pressure UV lamps are incorporated, treating flows of up to 40 m³/h with a UV dose of 30 mJ/cm².This dose is sufficient for disinfection of the water, providing complementary protection against chlorine resistant organisms, as well as enhanced algae control. UV treatment is compatible with all other sanitisers, including chlorine, bromine, active oxygen, peroxide and copper based compounds, and allows for the levels of these to be significantly reduced. UV treatment introduces no by-products into the water, but also has no residual effect. Therefore a small background level of disinfectant should always be maintained.TR2 systems have a small footprint and low power consumption. They are easily installed, having selectable inlet and outlet positions. HOW IT WORKSThe TR2 range utilises high output, low pressure UV lamps which are powered by electronic ballasts housed within the reactor top cap.The 2” PVC inlet and outlet unions allow easy connection onto existing or new PVC pipework systems.As water travels though the unit it is sanitised by a protective UV dose from the lamp.UVTR2-1, TR2-2, TR2-3 & TR2-4 UV SystemsSwimming Pool Disinfection© 2011 Degrémont Technologies Ltd. • Subject to change without notice. • www.triogen.com your local distributor:TECHNICAL DATATR MODELUV Lamp Flowrate Supply VoltageSupply RatingNumber W m3/h US gpm V/ ph/Hz ATR2-1 1 58 11 52 230/1/50-60 0.24TR2-2 2 116 22 99 230/1/50-60 0.48TR2-3 3 174 32 140 230/1/50-60 0.73TR2-4 4 232 40 178 230/1/50-60 0.97UVTECHNICAL FEATURES• Pressure Switch• Pressure Gauge• Selectable Inlet / Outlet Configurations• CE ApprovedMATERIALS• UV Reactor Body: UV inhibited polymer• Inlet/outlet: uPVC unions50455PowerCableSpace allowance for Lamp Removal Fixing Holes8 mm DiaDrain Plug285INLETOUTLET230600645PUMPISOLATING VALVESThe above flow rate is base on UV dose of 30mj/cm2 at end of lamp life.Units are supplied with a 2.4 meter long power cable length as standard.DIMENSIONSTR MODELEmpty Weight OperatingWeightShippingWeight Carton Sizekg lbs. kg lbs. kg lbs. cm in.TR2-1-2-3-4 8.2 18 21.3 47 11.3 25 33 x 33 x 81.3 13 x 13 x 32TR UVSYSTEMCONTACTTRIOGEN LtdUnit 14 Langlands PlaceEast Kilbride G75 0YFScotland, United KingdomTel: + 44 (0) 13 55 220 598Fax: + 44 (0) 13 55 570 058www.triogen.cominfo@triogen.comFILTER