TRE Feeding Hooper Brochure

Groupe Vauché Europe EQUIPEMENTS POUR LE TRAITEMENT ET LA VALORISATION DES DECHETS CONSTRUCTEUR depuis 1860 DESCRIPTIVE CARD Feeding hooper CODE : TRE 17-19, Boulevard Gambetta - 08200 SEDAN – France - Tél : (33) 03 24 29 03 50 - Fax : (33) 03 24 27 44 06 INTERNET : www.vauche.com - E-Mail : vauche@vauche.com Function Alimentation of sorting line 20 to 50m3 according to the lenght Technical characteristics Figure 1:Sight of a hopper on EAB Figure 2: Sight on a double feeding hopper Components Sealing steel flap galvanized thickness 8mm Rubber bandage thickness 8mm, tensile strength 315N/mm, 3 folds Flanged sheet box thickness 4mm with tightening veils thickness 6mm and inspection doors Galvanized cleats of belt in angle of 70x50x5; Conveyor chain ISO M112 (breaking strength::11.2 tonnes) or chain ISO M160 (breaking strength::16 tones) Galvanized cross of belt 80x40x4 Galvanized tube socket of 60x60x4 Race of bearing and of wear made up of a dish 30x6mm welded onto a tube of 50x50x4mm Standards widths of conveyor type EAB are: 1000, 1200,1400 and 1600mm Possibility of other widths for the particular cases. Groupe Vauché Europe EQUIPEMENTS POUR LE TRAITEMENT ET LA VALORISATION DES DECHETS CONSTRUCTEUR depuis 1860 DESCRIPTIVE CARD Feeding hooper CODE : TRE 17-19, Boulevard Gambetta - 08200 SEDAN – France - Tél : (33) 03 24 29 03 50 - Fax : (33) 03 24 27 44 06 INTERNET : www.vauche.com - E-Mail : vauche@vauche.com Maintenance The lubrication of the chain is ensured by a greasing device provided with a hand pump (automatic in option). Brushes are soaked and deposit grease on the chains ensuring a perfect lubrication. Interventions are possible over the entire length of the equipment, thanks to the installation of inspection doors. The higher bit of the chain is accessible by simple disassembling from the guide products. Protection of the personnel ? Emergency stop with drive cable over the length on each side of the equipment; accessible and actionable in any point by an operator. ? In foot and at the head, protection housings of the re-entrant angles. ? Conform to recommandations CRAM Diaporama Provence Recyclage Châtelets for the SMICTOM Martinique Recyclage CUDL