TRIBO.dsp - Model U3800 - Multichannel Particulate Monitor Specifications Datasheet

Please consult factory or your local representative for proper recommendations. To expedite a quotation, please complete the following worksheet and fax it to us at 978-777-8820 or email to sales@auburnsys.com. REQUEST FOR QUOTE: Name _________________________________________________________ Title __________________________________________________________ Company_______________________________________________________ Address________________________________________________________ City _____________________________State _______Zip________________ Telephone (_______)__________________Fax (______)_________________ Email __________________________________________________________ APPLICATION CONCERN ? Fabric Filter ? Environmental ? Cyclone ? Maintenance ? Other ? Process/Prod. Loss PROCESS CONDITIONS Temperature _________o F (Co ) Particulate _________________ Duct ID __________inches (cm) Gas _______________________ Pressure _________psig (bar) Velocity __________ft./min (m/s) Comments______________________________________________________ _______________________________________________________________ SPECIFICATIONS: ELECTRONICS Enclosure Polycarbonate NEMA 4X w/ (3) 3/4” conduit fittings (Dimensions: 7.40”x7.40”x4.84”) Power 85 to 260 VAC (12 VDC, 24 VDC, or P.O.E. optional) Power Required 5 watts maximum load Operating Temperature -4o - 158o F (-20o - 70o C) Humidity Range 0 - 95% non-condensing Dynamic Range 1 pA—10,000,000 pA—Standard 0.1 pA—1,000,000 pA—Optional Resolution/Precision 1 pA Standard / 0.1 pA Optional Sensitivity Range Typical detection range .00044gr/dscf (1mg/m3) Output 1 SPDT relay 5 amp @ 28 VDC or 250 VAC 100VA Ind. alarm set points, high or low (0 -100%), per channel Independent alarm time delays (0 - 999 sec.) per channel Industrial Ethernet/IP and Modbus TCP Display 3.5” active matrix touch screen display Other Features User selectable calibration mode; Local back-up data logging; Automatic contamination check; Unlimited scaling options SENSOR Remote Sensor Encl/ NEMA 4X Wetted Metal Parts Probe - 316 Stainless Steel All others - 303 Stainless Steel minimum grade Insulation* Extended High Performance (PFA)- standard, - 40° - 475°F (-40° - 240°C) Ceramic (High Temperature or Pressure) -40° - 1000°F (-40° - 540°C) Probe Insertion Length Standard probe lengths: ½, 3, 6, 12, 18, 30, 36 inch (1.3, 7.6, 15.2, 30.5, 45.7, 76.2, 91.4 cm) (specify to reach approximately mid-duct or further) Installation Weld the fitting into the pipe or duct and insert sensor Remote Sensor Cable Special coaxial cable : Temperature range: -60o to 400o F (-50o to 200o C) Maximum distance: 200 ft., for longer runs please contact factory Wiring Connections ¾ inch NPT female conduit fitting Pipe/Duct Connections ½ inch NPT male fitting or 1” quick release ferrule Options Wire Rope Sensors; In-Line Ring Sensors; Ambient Fugitive Dust Sensors *Consult factory or your local representative for proper recommendations ______________ Electronics Base ______________ E1 Power ______________ E2 Output ______________ E3 Output ______________ E4 Output ______________ S1 Probe Material ______________ S2 Insulation ______________ S3 Length ______________ S4 Mounting ______________ Cable ______________ Connectors ______________ Extras $_____________ Total Quotation Date ______________ Number of Units __________ Unit Price $____________ Total $ __________________ Est. Delivery _______ week(s) ARO (Quote valid 30 days; FOB Danvers, MA.) Model #: U3800 - ELECTRONICS E1 Power 1. 85 to 260 VAC (120V or 240V) 2. 18 to 32 VDC (24V) 3. 12 VDC optional E2 Relay Output X. No Output 1. (2) SPDT Relays E3 4-20 mA Output X. No Output 1. Isolated 4-20 mA E4 Digital Communication X. No Output 1. Industrial Ethernet/IP, Modbus TCP S1 Probe Material 1. 316 Stainless Steel 4. Hastelloy 2. Carbide 9. Special 3. Inconel S2 Insulator Material 1. Teflon (TFE): -40o to 300o F (-40o to 150o C); up to 30 psi 2. Ceramic (High Temperature or Pressure): -40o to 1000o F (-40o to 540o C); up to 2000 psi 3. Teflon (TFE) with Air Purge: -40o to 300o F (-40o to 150o C); up to 30 psi 4. Ceramic with Air Purge 5. Extended High Performance (PFA): Standard -40o to 450o F (-40o to 232o C); up to 30 psi 6. Extended High Performance (PFA) with Air Purge 9. Special S3 Probe Insertion Length* 1. ½” (1.3cm) 5. 18” (45.7cm) 2. 3” (7.6cm) 6. 30” (76.2cm) 3. 6” (15.2cm) 7. 36” (91.4cm) 4. 12” (30.5cm) 9. Special—specify length * Probe length should reach approximately mid-duct; for large ducts (>72”). Contact Auburn for additional options. S4 Sensor Mounting F. Flanged S. Special N. 1/2” Male NPT T. Threaded Quick Release Q. Quick Release V. Venturi (Fugitive Dust) Cable Length (feet) _______@ $________/foot Cable Terminals Factory Installed _______@ $________/set or Field Kit _______@ $________/set Extras Manuals (one included) _______@ $_______each Stainless Steel Tags _______@ $_______each Set of Prints _______@ $_______each Spare Parts Kit _______@ $_______each Field Test Unit _______@ $_______each ?-???-???? TRIBO.dsp U3800 TM Sept 2014 Auburn Systems, LLC • 8 Electronics Ave., Danvers, MA 01923 USA sales@auburnsys.com • www.auburnsys.com • Phone: 800-255-5008 or + 978-777-2460 • Fax: 978-777-8820