Trumbull - Tie-Lugs and Tie-Bolts Brochure

www.trumbull-mfg.comPhone: 330.799.3333Toll Free: 800.677.1799Fax: 330.797.3215Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501C-1100111Tie-LugsTRUMBULL TIE-LUGS are made from Ductile Iron for use in restraining mechanical joint valves, fi ttings, pipe and hydrants with 3/4? threaded rod. Cast from high strength Ductile Iron with a tensile strength of 80,000 psi and a yield strength of 60,000 psi. Trumbull Tie-Lugs are intended for use between MJ bell and gland in sizes 4? through 16?.Tie-BoltTie-BoltFor 4? through 12? Mechanical JointsUsed in place of T-Head Bolt. 3/4? threaded rod passes through eye and is retained with heavy hex nut, sold separately. Made of low carbon steel.DescriptionTrumbull Item No.Trumbull Item No.Tie Lug 364-3395 364-9035Domestic ImportedTrumbullItem No. Product Description Weight364-4000 3/4? Tie-Bolt, less nut 0.95 lbs.112-1328 3/4? Heavy Hex Nut (Plated Carbon Steel) 0.20 lbs.Typical InstallationUsage RecommendationQuantity that should be used on each joint depends on pipe diameter, line pressure and other factors; consult your Engineer for quantity required.Product InformationTie-Lugs and Tie-Bolts offset threaded rod away from Mechanical Joints to span across valves, fi ttings and other components. Used in conjunction with Socket Clamps (see page C-2).