Tube Squaring Machine RPG 2.5, RPG 2.5 Cordless Brochure

RPG 2.5RPG 2.5 CordlessTube Squaring MachinesThe new tube squaring machines for squaring and beveling thin-walled stainless steel tubes and micro fittings from to OD 6.35 - 63.5 mm (0.25" - 2.5") are an addition to the proven RPG range. The required, high-grade precise preparation of tube ends for orbital welding.Advantages:• Burr-free and square• Beveling (30°/35°) possible with a special holder• Patented quick change system (QTC®) for tools, clamping shells and tubes• High-performance coated tool bit with two cutting edges• Exact results due to micrometer feed• Speed regulated electric motor• No tools needed to change the clamping shell• A portable and light machine for mobile and secure operations• The special adapter clamping shell enables the RPG 1.5 clamping shells to be used to increase the range of the machine• A removable bench stand is included with the electric version• Right-angled machine with rotating/removable drive Your benefits:• Considerable cost-effectiveness thanks to low initial and production costs• Portable, easy to handle and safety use• Clean room compatibleprecision.power.simplicity.www.orbitalum.coml NEW: tool holder (optional) for beveling.NEWTube Squaring MachinesTechnical data RPG 2.5 RPG 2.5 CordlessDimensions 500 x 300 x 170 mm19.7" x 11.8" x 6.7"420 x 280 x 170 mm16.5" x 11.0" x 6.7"Weight (without clamping shells) 6.6 kg14.6 lbs5.15 kg11.4 lbsVersions Code 790 030 001:230 V, 50/60 HzCode 790 030 003:110 V, 50/60 HzCode 790 030 011:220 - 240 V, 50/60 Hz (12 V)Code 790 030 012:115 V, 60 Hz (12 V)Speed (max. idle speed) 9 - 153 rpm 0 - 80 rpmSound pressure level as per EN 23741During idling:Under load:approx. 75 dB (A)approx. 78 dB (A)approx. 75 dB (A)approx. 78 dB (A)Vibration level as per EN 50144 2.5 m/s² 2.5 m/s²Application rangeTube OD min. - max. 6,35* - 63,5 mm0.250"* - 2.500"6,35* - 63,5 mm0.250"* - 2.500"Wall thickness, max. 3 mm / 0.118" 3 mm / 0.118"Tube materials High-alloy steels (stainless steel material no. 1.40... to 1.45...) as per DIN 17 455 and DIN 17 456), unalloyed and low-alloy steels, aluminum.* Using a special adapter clamping shell (supplied as standard with the RPG 2.5), the clamping shells for the RPG 1.5 can also be used for the RPG 2.5 machines, extending the range of application to min. 6.35 mm (0.25"). ** Please check the outer diameter of the tubes before ordering the clamping shells. Non-standard sizes may require a special size (particularly for tubes in accordance with DIN 2430).The technical data is non-binding. It does not include any assurance of properties. Subject to change. Our general terms and conditions apply.Includes tool holder WH and multifunction tool MFW, a two-sided tool bit with high-performance Balinit® Futura protective coating against tool wear. The MFW can be used for all machines of the RPG series. Using this adapter clamping shell, the clamping shells for the RPG 1.5 can also be set up on RPG 2.5 machines, extending the processing range to min. 6.35 mm (0.250 inches). Supplied as standard with the RPG 2.5.Stainless steel clamping shells in different dimensions. Extremely durable. Ensures precise mounting of tubes and quick change of clamping shells without tools.Includes a durable storage and shipping case for safe transport. Very sturdy design.Code 790 700 382_00Info-Hotline: +49 (0) 77 31 792-787 up to 789© Orbitalum Tools GmbH | An ITW Company | 06.2008Josef-Schüttler-Straße 17, 78224 Singen, GermanyPhone +49 (0) 77 31 792-0, Fax +49 (0) 77 31 792-524www.orbitalum.com, tools@orbitalum.comformerly known as Georg Fischer RohrverbindungstechnikStamp of distributor:Included with the machine• 1 Tube Squaring Machine RPG 2.5 or RPG 2.5 Cordless• 1 Durable storage and shipping case• 2 Rechargeable batteries, 1 Battery charger (for Cordless versions only)• 1 Tool holder (Code 790 037 152) • 1 Multifunctional tool (Code 790 038 314)• 1 Adapter clamping shell (Code 790 030 106)• 1 Tool set• 1 Set of operating instructions and spare parts listAccessories Application rangeDimensionally speci? c clamping shells** Please enquire6,35* - 63,5 mm 0.250"* - 2.500"Standard tool holder WH12-I for squaring: Code 790 037 1526,35* - 63,5 mm*0.250"* - 2.500"Special tool holder WH12-I for squaring: Code 790 037 15412,7* - 63,5 mm0.50"* - 2.500"Tool holder WH3-V-30 for beveling (30°): Code 790 037 158Tool holder WH3-V-35 for beveling (35°): Code 790 037 159Wall thickness up to 3 mm / 0.118"OD max. RPG 1.5: 35.0 mm / 1.378"OD max. RPG 2.5: 58.0 mm / 2.283"Please enquire about further tool holders for diverse beveling angles.Multifunctional tool MFW-P-2Code 790 038 314Usable for all machines of the RPG series regardless of dimension.