Type SAP-1 - Special Waste Container Brochure

11127HAZARDOUS MATERIALS CONTAINERSSpecial Waste Container for solids, paste-like substances and hazardous liquids page 3Special Waste Container for acids and alkalis page 4Transport Box for aerosol cans page 5Collecting Container for Waste Oil page 6Loading Aid page 72 Oberfläche: feuerverzinkt22 Oberfläche: feuerverzinkt22DIBtBAMConstruction Code Packing Group Endangerment gradeX I extremely dangerousY II dangerousZ III slightly dangerousIBC Intermediate Bulk ContainerDIBt German Institute for Technical Construction Among others, the following laws, regulations and guidelines must be observed when transpor-ting materials that pose a threat to the environment.ADR European agreement concerning the international carriage of hazardous goods by roadRID European agreement concerning the international carriage of hazardous goods by railIMDG-Code International Maritime Dangerous Goods CodeGGVSEB German decree concerning national and transnational carriage of hazardous goods by road, rail and inland waterways We’ve sold more than105,000hazardous materials containers throughout EuropeCARRIAGE OF HAZARDOUS GOODS333333For the international transport of hazardous liquids, solids or paste-like substances according to the ADR/RID/IMDG codes, packing groups I, II and III. Collection and storage of flam- mable liquids with a flashpoint >55°C ¦ steel construction following DIN standard 30742 ¦ cylindrical construction ¦ fork sleeves (hoops) ¦ sturdy stacking corners with crane eyes ¦ suitable for pick-up by fork-lift truck and crane ¦ safety manhole cover (DN396) with 6 butterfly bolts and a seal ¦ automatic lid lock in 180° position ¦ the entire width is used for filling and emptying ¦ max. density 2.0 kg/l Accessories ¦ funnel with filling pipe and sieve (can be used as a collecting container according to the German regulation „TRbF 20“ for flammable liquids of the GHS-categories 1-3)Type Volume in lDimensions (l x w x h) in mmExtra load in kgTotal permitted weight in kgWeight in kgASF/P 100-2 88 540 x 440 x 922 800 231 52Type ASF/P 100-2Funnel with filling pipe (accessory)Sieve (accessory)Cylindrical constructionWith fork sleeves (hoops)Stacking corner with crane eyeLid seal Filling openingUN-APPROVALS§1A2/X1.7/250/D/8724-BAUER1A2/X*/S/D/8723-BAUERSPECIAL WASTE CONTAINER TYPE ASF/P 100-2 Finish: hot-dip galvanized4 Oberfläche: feuerverzinkt4 Oberfläche: feuerverzinkt44 Oberfläche: feuerverzinkt4 Oberfläche: feuerverzinkt Finition: galvanisée4 Oberfläche: feuerverzinkt ¦ following DIN standard 30741, part 1 ¦ outer container made of steel sheeting, inside spray painted using acid resistant paint ¦ changeable PE-inner with screw-on lid ¦ through fork sleeves ¦ sturdy stacking corners with crane eyes ¦ suitable for pick-up by pallet- or fork-lift truck and crane ¦ lid: spring-assisted and with a seal ¦ 3 lid fasteners, one of which can be locked ¦ automatic lid lock in 270° position ¦ lid can be fixed in any position up to 80° ¦ dipstick to register any leakage ¦ max. density 1.9 kg/lFor international transport of hazardous liquids according to the ADR/RID/IMDG codes, packing groups II and III Type Volume in lDimensions (l x w x h) in mmExtra load in kgTotal permitted weight in kgWeight in kgASK 540-3 540 1200 x 1000 x 1245 4000 1010 256Type ASK 540-3SpringThrough fork sleeves Crane eye on the inside of the stacking cornerLid sealAutomatic lid lockDipstick to register any leakageSteel outer container and PE-inner with screw-on lidUN-APPROVALS§31HA1/Y/D/0297-BAUER/4000/*SPECIAL WASTE CONTAINER TYPE ASK 540-3 Finish: hot-dip galvanized55 Oberfläche: feuerverzinkt 55 Oberfläche: feuerverzinkt 5 Oberfläche: feuerverzinkt 5 Oberfläche: feuerverzinkt ¦ sturdy steel construction following DIN standard 30741, part 1 with integrated retention basin, welded liquid-tight; wire mesh side walls (20x20) set inside ¦ galvanized lid, can be opened from both sides, with 2 lid fasteners ¦ lid locks automatically in 270° position ¦ through fork sleeves ¦ suitable for pick-up by pallet- or fork-lift truck ¦ fold-out hazardous goods plate on two opposite sides ¦ absorbent felt is clamped to the floor using a special fixture and can easily be changed using the lever Accessories ¦ PE foil bag (needled), air permeable ¦ absorbent feltTRANSPORT BOX FOR AEROSOL CANS TYPE STB 1000For the international transport ofaerosols according to the ADR/RID/IMDG codes, packing groups II and III Type Volume in lDimensions (l x w x h) in mmCan be stacked Extra load in kgTotal permitted weight in kgWeight in kgSTB 1000 1000 1200 x 1000 x 1222 3 units 4000 732 180Type STB 1000Absorbent felt (accessory) with special fixturePE foil bag (accessory)Fold-out hazardous goods plateLid lockCan be stacked (3 units)UN-APPROVALS§50A/Y/D/12019-BAUER/3000/732 Finish: hot-dip galvanized6 Oberfläche: feuerverzinkt6 Oberfläche: feuerverzinkt66 Oberfläche: feuerverzinktZ-38.11-70DIBt6 Oberfläche: feuerverzinkt Finition: galvanisée6 Oberfläche: feuerverzinktCollection, storage and disposal of waste oil and flammable liquids with a flashpoint > 55° C Accessories ¦ double-walled container/basin combination; steel outer protects contents (no risk of damage by passing fork lifts etc.) retention basin volume 100%; dipstick to register any leakage ¦ synthetic lid can be locked in po-sition; unit lockable using a latch (accessory not part of the standard scope of supply) ¦ inner container with a 40 litre filling tray covering the entire surface area; helps reduce the risk of dirtying and facilitates filling i.e. emptying small receptacles ¦ level indicator ¦ dipstick to control the fill level ¦ 1 1/2” aeration valve ¦ 2” tank truck coupling including immersion pipe for emptying by suction ¦ indoors and outdoors ¦ air pipe ¦ fixture for lockType Volume in lDimensions (l x w x h) in mmTotal permitted weight in kgWeight in kgASO-D 800 800 1200 x 1220 x 1070 1000 194Type ASO-D 800 ... with air pipe (accessory)Z-38.11-70DIBtAeration valve Dipstick to control the fill levelFilling tray and 2” tank truck coupling Level indicator / overfill safety featureSynthetic lid locks in position and can be locked using the latch (accessory)COLLECTING CONTAINER FOR WASTE OIL TYPE ASO-D 800 Finish: hot-dip galvanized ? certified manufacturer EN ISO 9001 ? manufacturing processes under TÜV surveillance ? every unit tested for leakage ? flammable liquids with a flashpoint >55°C ? flammable liquids of the GHS-categories 1-3 7 Oberflächen: feuerverzinkt Edelstahl Oberfläche: feuerverzinkt Oberflächen: feuerverzinkt Edelstahl Oberfläche: feuerverzinkt Oberflächen: feuerverzinkt Edelstahl Oberfläche: feuerverzinkt Oberflächen: feuerverzinkt Edelstahl Oberfläche: feuerverzinkt ¦ sturdy frame with through fork sleeves ¦ suitable for pick-up by pallet- or fork-lift truck ¦ rear and side walls made of lattice grid; double-winged door at the front with locking mechanism ¦ door stop engages in 180° position ¦ metal bands fitted to rear and side walls so loads can be securedLOADING AID TYPE LABEspecially designed for transpor-ting drums - max. 8 x 120 l - or 8 units Special Waste Container type ASF/P 100-2 Type Inside dimensions (l x w x h) in mmExternal dimensions (l x w x h) in mmExtra load in kgTotal permitted weight in kgWeight in kgLAB 930 x 1036 x 1360 1200 x 1000 x 1600 4000 2150 150Type LABThrough fork sleevesLocking mechanism at the top of the doorsLocking mechanism at the bottom of the doorsType LAB stacked Finish: hot-dip galvanized8 Oberfläche: feuerverzinkt... made by Finition: galvaniséeBauer GmbH Eichendorffstrasse 62 46354 Suedlohn Germany( +49 2862 709 - 07 +49 2862 709 - 156info@bauer-suedlohn.dewww.bauer-suedlohn.comwww.geotainer.comHAZARDOUS MATERIALS CONTAINERS04-2013 We reserve the right to make technical alterations; errors and omissions excepted