Ultra-Sidewinder - Cable Protection System - Instructions Manual

Ensure floor is level and without safety hazards. Plan the distance needed and ensure that the proper number of parts is available. Assemble main body segments by sliding the male end into the female end until parts snap together as shown in Figure 1. SMALL - Press wires through the rubber tabs on the bottom such that they fit loosely in the cable channel as shown in Figure 2. MED/LARGE - Place cable in channel. Snap plastic retainers into place alternating from one side to another. See Figure 3. Lay the Ultra-Sidewinder on the floor and check to ensure the system lays flat on the ground with wires properly contained.