Ultrasonic Detergents Specification

Free-rinsing,biodegradabledetergent containingno silicates or caustics. Will leave no organic orinorganic residueExcellent sequesteringability for use in hard water and to ensure free rinsing of detergent and all contaminantsContains no solvents.Can be used at room or elevated temperaturesModerately alkalinedetergent with low surface tension forremoval of the mosttenacious soils in glass and metals manufacturingDP151 enhances thesheeting effect of water on substrates by preventing dropletformulationThe low surface tension and strong ionic charge make this formulation very effective in smallparticle removalExcellent wetability,suspension, rinsability,and emulsificationproperties on a widerange of materialsPrecision Cleaning With Ultrasonics 2113 Sanatoga Station Road, Pottstown, PA 19464 USAP: 610-705-5900 • F: 610-705-0300For technical service call or e-mail: technicalservices@valtechcorp.comwww.valtechcorp.com CERTIFIEDISO 9001 : 2008REACH EC 1907/2007is a registered trademark of Valtech CorporationTB-DetergentsUltrasonicCleaning, Rev. E, 4/26/2012SP2200PropertiesVALTRON®ProductsProductDescriptionIndustry ApplicationsContaminants to be RemovedMaterial CompatibilityAlkaline blend of anionicand nonionic surfactantsand biodegradable solventfor complete contaminationremovalNoncaustic detergentcontaining a biodegradablesolvent for effective removalof hydrocarbons at ambientand elevated temperaturesBuffered pH detergent witha surfactant system thatreduces surface tensionAlkaline blend of anionic,nonionic and amphotericsurfactants that providea hydrophilic-lipophilicbalance when removing themost difficult contaminationRinse aid supplied as a liquid concentrate for eliminating spotting and streakingNeutral detergent with a blend of cationic and nonionic surfactants for cleaning materials sensitive to acids and alkalisNeutral pH detergent thatcontains no anions includingchlorides, fluorides, phosphate, or sulfonatesOptical components,metal cleaning, ophthalmics, andceramicsSilicon wafers, metal cleaning, and ceramicsOptical components, metal cleaning, ophthalmics, andceramicsOptical components, metal cleaning, ophthalmics, medicaldevice, and ceramicsRinse aid for use at concentrations below 1% bv. Can be used at room to elevatedtemperaturesOptical components, metal cleaning, ophthalmics, electronics, and ceramicsFormulated for cleaning highlysensitive components in the computer disk drive and electronics industriesLight oils, particulates, wax, tape residueHydrocarbon contaminants, particles,fingerprintsOils, light oxides, dust, particlesCerium oxide, aluminum oxide, various polishingcompounds, light oils, small particlesEnsures free-rinsing of contaminants after cleaning with VALTRON detergentsParticles, hydrocarbon filmsParticles, hydrocarbonfilms, process contaminationSteel, stainless steel, nickel, most glass, plastics, ceramics, quartz, sapphire,silicon and silicon carbideSteel, stainless steel,nickel, most glass, plastics, ceramics, quartz, sapphire,silicon and silicon carbideAluminum, copper, brass, nickel, ferrous metals, stainless steel, titaniumcarbide, glassSteel, stainless steel,nickel, most glass, plastics, ceramics, quartz, sapphire,germanium, silicon and silicon carbideAll metals, glasses, plastics, ceramicsAll metals, glasses,plastics, ceramicsAll metals, glasses,plastics, silicon wafers, ceramics SP2260SP2700-KBDP188DP151DP154DP97031VALTRON® Detergents are formulated with high-purity raw materials for precision cleaning applications. The aqueous detergents are filtered through 0.2 micron filters to ensure product purity. They are supplied in liquid concentrate to guarantee economical usage of material. These detergents can be used in spray, immersion, and mechani-cal contact systems. The formulations are free-rinsing and will leave no organic or inorganic residues after rinse. This is a partial list of detergents available through Valtech Corporation. For additional information contact us at info@valtechcorp.com.Information herein is accurate to the best of our knowledge. Suggestions are made without warranty or guarantee of results. Before using, user should determine the suitability of the product for its intended use and user assumes the risk and liability in connection therewith. We do not suggest violation of any existing patents or give permission to practice any patented invention without a license.