Ultrastar Pharma-Replaceable Terminal Module

DESCRIPTIONhe Pharma-Replaceable TerminalModule (P-RTM) is designed for applications that require frequent filter testing and routine cleaningprocedures as found in hospitals (surgicalsuites) the pharmaceutical and biotech-nology cleanrooms. The P-RTM is easy toinstall, change filter and provides an optimum service life. A gel seal betweenthe filter and hood eliminates any by-passleakage. The P-RTM uses 2.0" (51mm) or4.0" (100mm) mini-pleated media packwith efficiency of 99.99% at 0.3 µm or99.9995% at 0.12 µm particle size. The low profile module is manufactured out of either aluminum or stainless steel. The P-RTM is designed to fit into T-bar ceilingand plaster ceilings. Standard features are collar, diffuser/damper, stainless steel grilland static pressure port. Each unit is subjected to a factory 5-inch positive pressure W.G. leak test. Due to varyingend user requirements, custom engineeredunits are available.BENEFITS• An adjustable butterfly damper (range of 30-110 FPM) creates a balanced and uniform airflow resulting in longer service life.• Lower cost of ownership—only the filter is changed, not the entire unit.• Rugged leak free construction available in aluminum or stainless steel. Each unit is subject to a factory 5-inch positive pressure W.G. leak test.• Access to aerosol injection system,test port and damper control for easy service of filter.APPLICATIONSThe P-RTM is designed to optimize performance in filtration applications forpharmaceutical, biotechnological, medicalmicroelectronics, semiconductors, foodprocessing industries, as well as surgicalcenter operating rooms and isolationareas.CLEANROOM FILTRATION¦ Low pressure drop design reduces energy consumption¦ Filter retaining systemprovides easy filterchange¦ Stainless steel screen(20 gauge with 40%open area) fits flushwith housing¦ Easy to remove andclean¦ Fluid gel sealantensures a leak free,uniform sealF I L T R A T I O N GR O U PULTRASTAR PHARMA–REPLACEABLE TERMINAL MODULEF I L T R A T I O N GR O U PTF I L T R A T I O N GR O U PFILTRATION GROUP ULTRASTAR PHARMA–REPLACEABLE TERMINAL MODULEAVAILABLE OPTIONS¦ Removable Stainless Steel Trim¦ Insulation¦ Aerosol Dispersion Nozzle¦ Aerosol Dispersion Quick Disconnect¦ Seismic Tabs¦ Heavy Duty Butterfly Damper¦ Guillotine Damper¦ Extended Stainless Steel GrillPlease contact us for additional options.Specifications & drawings available upon request.© FGI 11/04FILTRATION GROUPPhone: 877-FGI-TEAM (344-8326)Fax: 800-518-1162www.filtrationgroup.come-mail: aerostar@filtrationgroup.comNational?Air?Filtration?AssociationMODULE SIZE*Please see price list for order information.* All dimensions are in inches. Modules are manufacturedin 0.063 aluminum (also available in stainless steel), havea perforated 304 SS removable screen with 4 cap-nuts.Filter is not inlcuded.ORDER CODE DESCRIPTIONP-RTM1P-RTM2 P-RTM3 P-RTM423 5/8 X 23 5/8 (5/8 TRIM FLANGE)23 5/8 X 47 5/8 (5/8 TRIM FLANGE) 25 3/8 X 25 3/8 (1 1/2 TRIM FLANGE) 25 3/8 X 49 3/8 (1 1/2 TRIM FLANGE)GrillePRESSURE DROPTRIM DETAILFILTER FACE VELOCITY (FMP)NOTE: This graph represents a typical rating. 3 & 6" filters are tested at 100 FPM and 12" filters are tested at 250 FPM at the facto-ry. The inside face dimension (not including filter frame) is used to calculate resistance. Recommended service restriction is approxi-mately two times the initial restriction at the factory test flow rate.Filter Face Velocity [FPM] = Rated Flow [cu ft per min] x 144Height of Filter [in] - (less frame) 1.50" x Width of Filter [in] - 1.50" (less frame)