Upstream Drilling Waste Treatment pdf

PRODUCT GUIDE PG030 Oil and Gas Drilling Waste Stream Treatment Global Advantech’s products for the decontamination of drilling wastes to facilitate their safe disposal after separation and recovery of oils after drilling using oil-based muds Global Advantech Limited Exceptional clean technologies for a sustainable future..... Energy House, 14 Maurice Close, Kimbolton, Cambridgeshire, PE28 0HD, United Kingdom t +44 (0)845 519 0159 / e enquiries@globaladvantech.com / www.globaladvantech.com 1 of 2 Copyright © 2009-2011 Global Advantech Limited PG030 EN 31 Code Product Contaminant Details DC201 HEAVY DUTY DEMULSIFIER Water/brine/seawater • Separation and recovery of oils and hydrocarbons from oil-in-water and water-in-oil emulsions • Separation of water/brine/seawater from oil-based drilling muds that have become contaminated with water/brine during operations • Use in conjunction with oil-water separators, liquid-liquid hydrocyclones, settling tanks and centrifuges • Usage: blend 0.2% to 2.0% into oil-based drilling mud to be dewatered Code Product Mud Type Details DC501 OBM DRILL CUTTINGS WASHING AGENT OIL-PHASE 501 Oil-based • Oil-phase additive for aqueous cleaning of drill cuttings • Decontamination and recovery of oils from OBM drill cuttings, permitting their safe disposal • Use in conjunction with a cavitation scrubbing system • Usage : blend 0.5% to 2.0% into drill cuttings prior to entry into cavitation scrubbing system • Fresh and salt process water compatible DC502 OBM DRILL CUTTINGS WASHING AGENT OIL-PHASE 502 Oil-based, cuttings with high clay/shale content • Oil-phase additive for aqueous cleaning of drill cuttings • Decontamination and recovery of oils from OBM drill cuttings, permitting their safe disposal • Use in conjunction with a cavitation scrubbing system • Usage : blend 0.5% to 2.0% into drill cuttings prior to entry into cavitation scrubbing system • Fresh and salt process water compatible DC503 OBM DRILL CUTTINGS WASHING AGENT OIL-PHASE 503 Diesel-based • Oil-phase additive for aqueous cleaning of drill cuttings • Decontamination and recovery of oils from OBM drill cuttings, permitting their safe disposal • Use in conjunction with a cavitation scrubbing system • Usage : blend 0.5% to 2.0% into drill cuttings prior to entry into cavitation scrubbing system • Fresh and salt process water compatible DC511 OBM DRILL CUTTINGS WASHING AGENT AQUEOUS-PHASE Oil and diesel-based • Aqueous cleaning of drill cuttings • Decontamination and recovery of esters from ester-based mud drill cuttings, permitting their safe disposal • Use in conjunction with a cavitation scrubbing system • Usage : mix 0.5% to 2.0% into process water in cavitation scrubbing system • Fresh and salt process water compatible DEWATERING OIL-BASED DRILLING MUDS WASHING DRILL CUTTINGS PRODUCT GUIDE PG030 Oil and Gas Drilling Waste Stream Treatment Global Advantech Limited Exceptional clean technologies for a sustainable future..... 2 of 2 Code Product Mud Type Details DC520 WATER-BASED MUD DRILL CUTTINGS WASHING AGENT Water-based • Aqueous cleaning of drill cuttings • Decontamination of water-based drill cuttings, permitting their safe disposal • Use in conjunction with a cavitation scrubbing system • Usage : mix 0.5% to 2.0% into process water in cavitation scrubbing system • Fresh and salt process water compatible Code Product Contaminant Details DC241 HEAVY METAL SOLUBILISING AGENT A Heavy metals, e.g. copper, zinc, lead, chromium, etc. • Decontamination of drill cuttings by sequestration of heavy metals once majority of oil has been removed/recovered • Use in conjunction with cavitation scrubbing or continuous mixing systems • Usage: dilute at a rate 1 part in 10 to 100 parts of water • Contains a blend of sequestrants DC242 HEAVY METAL SOLUBILISING AGENT B Heavy metals, e.g. copper, zinc, lead, chromium, etc. • Decontamination of drill cuttings by sequestration of heavy metals once majority of oil has been removed/recovered • Use in conjunction with cavitation scrubbing or continuous mixing systems • Usage: dilute at a rate 1 part in 10 to 100 parts of water • Contains a blend of sequestrants (alternative chemistry to DC241, product is selected after testing) DC245 ARSENIC SOLUBILISING AGENT Arsenic • Decontamination of drill cuttings by solubilisation of arsenic once majority of oil has been removed/recovered • Use in conjunction with cavitation scrubbing or continuous mixing systems • Usage: dilute at a rate 1 part in 5 to 20 parts of water Code Product Details DC201 HEAVY DUTY DEMULSIFIER • Separation and recovery of oils and hydrocarbons from oil-in-water and water-in-oil emulsions • Separation of oil and hydrocarbons from hydraulic fracturing flowback water, etc. • Use in conjunction with oil-water separators, liquid-liquid hydrocyclones, settling tanks and centrifuges • Usage: mix 0.2% to 2.0% into emulsion being treated Please refer to Product Guide PG031 “Oil and Gas Production” for other oil and gas industry waste stream treatments, hydrocarbon recovery, decontamination and cleaning products. WASHING DRILL CUTTINGS Cont/… LEACHABLE HEAVY METAL AND ARSENIC REMOVAL FROM DRILL CUTTINGS RECOVERY OF HYDROCARBONS FROM FRACTURING FLOWBACK WATER, ETC.