Vacuum-Fixing-Devices for Pneumatic Vibrators Brochure

Vacuum-fixing-devices forpneumaticvibratorsVAC serie· Discharge of bins.· No constructional modification necessary.· Also on round surface.· Easy handling.· Ideal for pneumatic vibrators.· Low air consumption, compact, rigid construction. Vacuum fixing deviceVAC SerieApplicationThe vacuum fixing devices, VAC serie are made for fast attachment on smooth or more or lessrough and bended surfaces to empty bins and drums, clean pipes.They are used if there is no other method of fixing available or the vibrators have to bemoved often.The surfaces to be vibrated need to have a minimum diameter, following the types:· VAC 8:110 mm· VAC 10:110 mm· VAC 11:110 mm· VAC 12:350 mm· VAC 15:650 mm· VAC 20:850 mm· VAC 30:1500 mm· VAC 40:1500 mmFunctionAll VAC clamps are available in two different versions to· HG N: Normal hose set.· HG S: Economy hose set.The necessary vacuum is created by a pneumatically operated device which is part of themounting plate.The economy hose set creates an adjustable vacuum just enough to hold the unit withoutvibration. lf the vibrator is started, first the maximum vacuum will be generated before thevibrator starts. The economy set is recommended if the VAC clamp is to remain on the bin fora longer time.Without vibration the air consumption with HG S version to hold the clamp in position will beless than 30% than the one obtained with the HG N version, only.OperationThe VAC with the vibrator is pressed with one hand against the surface of the unit to vibrate,with the other hand a switch on the VAC clamp is turned. The clamp will immediately befixed. Then the vibrator is operated by a valve which is integrated in the supply hose. Theeconomy set will care for full vacuum before the vibrator starts. After closing the valve for thevibrator the VAC clamp will remain in position until the switch on the clamp is turned back.WarningThe unit has to be fixed with a safety steel line (included) to a right point to prevend it fromfalling down in case of drop of line pressure.Vacuum fixing deviceVAC SerieDimensionsVAC 8 / VAC 10 / VAC 11 / VAC 12 VAC 15 / VAC 20VAC 30 VAC 40Dimension X depends on vibrator installed.Type A B C D E F GVAC 8 21 20 150 53 30 55 190VAC 10 21 20 200 53 35 55 245VAC 11 21 20 300 53 35 55 330VAC 12 25 60 300 60 68 100 330VAC 15 50 - 350 95 100 150 -VAC 20 70 - 440 115 150 200 -VAC 30 70 30 398 340 428 370 -VAC 40 60 85 428 375 425 - -Vacuum fixing deviceVAC SerieTechnical characteristicsType Air consumption with no vibration l / min Weight4 bar 6 bar kgVAC 8 + HG 10 N 40 60 0,95VAC 8 + HG 10 S 20 22 1,20VAC 10 + HG 10 N 40 60 1,05VAC 10 + HG 10 S 20 22 1,30VAC 11 + HG 10 N 40 60 1,25VAC 11 + HG 10 S 20 22 1,50VAC 12 + HG 15 N 60 122 2,85VAC 12 + HG 15 S 29 36 3,20VAC 15 + HG 15 N 110 170 3,40VAC 15 + HG 15 S 41 52 3,75VAC 20 + HG 15 N 110 170 7,25VAC 20 + HG 15 S 41 52 7,60VAC 30 + HG 30 N 110 170 11,50VAC 30 + HG 30 S 49 60 12,00VAC 40 + HG 40 N 220 340 20,00VAC type to be used following the vibrator installed:VAC 8:NYK-8 AL, NTP 25 BVAC 11:NTK-18 AL, NTS 180, NTS 250.VAC 10:K-8, K-10, R-50, DAR-2,NTK-15, NTK-16, NTK-8 ALT-50, GT-8, GT-10, FP-12, FP-18, FP-25*.VAC 12:T-80LP; FP-35PKL-150; NTP-32;NTS-75/01, NTS-50/01.VAC 15:K-20; K-25; K-30; K-36 / DAR-4*, DAR-5*T-80, T-100* / R-80; R-100*GT-10; GT-13; GT-16; GT-20; GT-25; GT-36*FP-25; FP-35.PKL-150 / NTK-18 AL; NTK-25 / NTP-32.NTS-75/01; NTS-50/01; NTS-70/02*.VAC 20:GT-30; GT-36T-100HPR-100NTP-48DAR-5NTS-70/02; NTS-54/02; NTS-50/04*VAC 30:NTS-50/04; NTS-50/08* / PKL-200/5 / R-120.VAC 40:NTS-50/08*; NTS-50/10*.* Depending on application, please ask for advice.Ctra. Villabona-Asteasu, km 3Apartado 247Tel. (+34) 943 691 500Fax (+34) 943 692 667E-20159 Asteasuwww.urbar.comurbar@urbar.comVAC / 2 2001.01