Vacuum Pumps - Brochure

MULTI JECTOR® Vacuum Pumpsand Vacuum Components by VOLKMANNVOLKMANNmultiple stageejectorsenergy-savingcompact ejectorsstainless steelVacuum Pumpsvacuum switchesvacuum filtersVacuum by pressure.VOLKMANN has been successfully sup-plying Vacuum Pumps, designed to suit a wide range of vacuum applications, for more than 25 years. The basis of this success has been the continuous development and innovative approach taken to satisfy the ever increasing variety of applications and special tech-nical requirements demanded. This has resulted in many solutions which help to save the user time and costs.The Volkmann MULTIJECTOR® series of vacuum pumps contains various pump types which have been designed specifically to suit the wide range of dif-ferent duties which present themselves and the new generation MULTIJECTOR® models of the M, G, K and RVA types have set new benchmarks in relation to economy, quality and cost-perform-ance-ratio.Take a look by yourself and use this brochure to get a brief overview on the Volkmann Multijector Vaccum Pumps and how to use them in your vacuum applications.Talk to us about your special needs in the field of Vacuum Components.Reliable and experiencedMULTIJECTOR® Vacuum Pumps have been established in many applications and their high reliability in achieving the specified duties in these applications, has been proven not only for simple duties, but also and especially, in critical production areas.Multijectors are not subject to wear, are very robust and are virtually maintenance-free. They are backed by the VOLKMANN professional service, which brings considerable know-how directed towards providing a clear solution for each application. It offers fast response times, solutions which are the most cost effective and user-friendly information. In addition, this service offers to develop and manufacture tailor-made pumps and to design complete vacuum systems.CONTENTSP. 3.: How a MULTIJECTOR® worksP. 4.: Vacuum applicationsP. 5.: Saving energyP. 6.: The MULTIJECTOR® KP. 8.: The MULTIJECTOR® M / MLP 10.: The MULTIJECTOR® G / GLP. 12.: The MULTIJECTOR® MRVAP. 13.: Vacuum componentsP. 15.: Annex (suction data)Exhaust airSuction airCompressed airhigher efficiency at thesame air consumptionMULTIJECTOR®Additional stages in the MULTIJECTOR®(recylcle the compressed air)single stage Ejector- Suction air +AtmosphereVacuumMultijectors save compressed air and reduce operation expenses.The classical Ejector (Venturi)…Compressed air driven vacuum pumps have a lot of advantages over alternative pump designs such as small size, low weight, simple construction, as well as wear and virtually maintenance free operation. The control system is operated entirely by pneumatics off the compressed air supply, which enables the pump to be used safely in hazardous areas. The pumps are quiet in operation and do not emit either heat or dust or cause vibration.But how to make a Venturi more efficient and economic?A look at the diagram below indicates how the MULTIJECTOR works: A classical Ejector consists of a primary nozzle (injector), a mixing chamber and a diffuser. Compressed air is supplied through the primary nozzle, expands quickly, entrains air in the mixing chamber and leaves the pump into the surroundings through a diffuser. Schematic characteristic lineof a MULTIJECTOR® Vacuum PumpFurther advantages of Volkmann MULTIJECTOR® Vacuum PumpsBecause of the sophisticated construction, the Multijectors work very quietly and the higher the vacuum the more quietly the pump works. Hence ear protection is not required. In addition, as the gas jet expands in the MULTIJECTOR, a cooling effect is generated, instead of heat, and there is, therefore, no warming of the area of operation.A Multijector can be installed easily, in any position and operates completely oil free. The only connections required are the compressed air and the vacuum lines and these connections are quickly and easily made by the plant operator.As soon as the pump is switched on, vacuum is generated very rapidly and this allows a cyclical operation of the Multijector to be controlled pneumatically, (via air from the compressed air supply), by a 2/2 way solenoid valve. Hence, expensive vacuum on/off valves, with their generally unknown losses (through leakages etc.), can be eliminated.Small size and the low weight make it possible to mount Multijectors closer to the suction location than other vacuum pumps. This enables a faster vacuum build-up to take place by avoiding unnecessary volumes of air in the vacuum line. Consequently, lower losses and faster response times are achieved. In addition, when a cyclical operation is being used, energy is only consumed during the suction cycle, whereas other vacuum pumps continue to consume energy throughout the complete cycle. An accessory to the vacuum control can also be supplied, which restricts the vacuum and holds it automatically within the adjusted target area, thus further reducing the energy costs. A Multjector contains neither rotary parts nor electrical components. It does not produce heat in operation and is completely electrically conductive. This makes it explosion proof when earthed/grounded.... the multiple stage MULTIJECTOR®Volkmann Multijectors use multiple ejector stages, which save compressed air and reduce running costs.When additional nozzles are built behind the diffuser, the air ejecting from the first stage, (which consists of compressed air mixed with the suction air induced by the venturi effect), serves the following stage as a „free“ propulsion jet, which does likewise for subsequent stages. These additional stages do not reach the high vacuum of the first stage, but they vastly enlarge the effective suction capacity, at reduced vacuum, for no additional compressed air usage. However, the vacuum pump can still achieve the same high vacuum as the first Ejector stage because the following stages are actually separated from the common vacuum chamber by flap valves, which close off if the suction requirement increases. This particular nozzle geometry and flow guidance makes it possible for the MULTIJECTORS to be very efficient, for minimum compressed air usage. Sectional drawingof a MULTIJECTOR®3Volkmann can supply valuable application know-how and help with plant designs and lay-outs – talk to us.Some typical applications for Multijector pumps include:Vacuum lifting and holding ... of all sorts of items ranging from eggs, china, work pieces, steel sheets, to stone blocks, or other heavy items. No matter if a suction cup grips eggs or opens a bag, a vacuum transporting belt conveys steel sheet billets, a suction plate lifts up heavy granite plates or a robot arm with vacuum grippers fits in system subassemblies or car windscreens - Multijectors simplify and protect many handling tasks and also save money.Evacuation to avoid air entrapment ... in items such as casting moulds, packages, mixing operations, bulk materials (to increase density and reduce bulk size for storage or transport), etc. Deep-drawing ... of plastics is practicable, safe and easily performed with vacuum.Vacuum conveying ... of powders, dusts, granules and small pieces, which can be transported safely and carefully up to 30 m high and up to 80 m distance with vacuum. Suction of liquids and fats ... directly into containers, with the Multijector working as a self priming pump. The recycling can be done with little effort, e.g. in turning-, milling- and grinding-opereations, where coolants and lubricants like oil or emulsions are used. Ask for our special units.Blast air generation... to blow air into containers, in printing and book binding operations etc., where both is needed: vacuum and pressurised air. Multijectors can “multiply“ the feeded compressed air by making use of the suction air. They provide pressures up to 0.8 bar at their exhaust – a unique way of saving energy.Vacuum distillation ... to reduce boiling pointsof liquidsVacuum filtration ... to decrease filtration timesVacuum testing ... to detect leakages,using low cost testing units.4Safe vacuum at 3.5 or 5.6 bar operating pressure?In most of the compressed air supply lines the pressure is around 6 - 7 bar. Nevertheless sometimes it can happen that the pressure decreases noticeably for a short time in spite of a satisfactory efficient compressor - e. g. because of insufficient pipe diameters, wrong pipework or high momentary air withdrawal in the respective pipe segment.Normally, it is recommended that the Multijector pumps of the series MULTIJECTOR M, G and K with 5.6 bar operating pressure (0.56 MPa, 81 psi) as being suitable for many applications. In their class they offer optimum efficiency and the best utilisation of compressed air, minimising the energy demand. However, other nozzle systems have been deve-loped, which are suitable for applications where variable compressed air pressures are likely to be experienced. Here, the Multijector pumps of the series ML and GL, are recommended, as these pumps are specially designed to reach their maximum vacuum of -910 mbar at pressures as low as 3.5 bar.Individual solutionsFor special, individual applications, Volkmann will be pleased to develop and manufacture innovative, coordinated products, subassemblies and complete system solutions, at attractively low costs and these special enquiries are welcomed.Advisory and in-situ trials, vacuum pumps for testing Technicians and engineers are available for advice and for on site testing and their first hand experience and expertise can prove very helpful. It is also possible to have any of the vacuum pumps for trials for a period of two weeks, without any obligation. The pumps are, generally, available immediately on request and, except delivery, are free of charge. Such trials will usually quickly demonstrate the suitability of the pump, but further help and technical assistance is always readily available.Quality and reliability:Volkmann MULTIJECTOR® Vacuum Pumps carry a two year warranty from the day of delivery.Further energy saving devices in vacuum applications:Restricting the vacuumIn handling applications, if the area of the suction cup is maximised, then only a relatively low vacuum has to be created to achieve the required holding force. For example, using a Multijector M or G type, approximately 93 % of the energy requirement can be saved, in most applications, when the vacuum is reduced from -900 to -500 mbar. Hence, only 7 % of the original energy requirement is needed, which gives considerable cost savings.Restricting the operating pressureUse of a simple pressure controller to adjust the working pressure only as high as is needed it for safe operation, can produce worthwhile cost savings. Care must, of course, be taken to ensure that a reasonable pressure reserve is still available. (The appendix of this brochure gives data about the achievable vacuum at different working pressures and how much air is saved.)Vacuum control If a vacuum is to be drawn and maintained in a vessel or contained system, energy can be saved by cutting off the vacuum pump as soon as the required vacuum level has been reached. This can be achieved by monitoring the vacuum and sending a signal to the vacuum pump, via a simple microswitch, which cuts off the compressed air, whilst the vacuum is maintained by including a non-return flap at the pump. The vacuum is, however, likely to slowly decrease, due to leakages etc., hence, at a pre-selected point, a signal to restart the pump can be sent. Automatic bin dischargingand feeding of powders with a MULTIJECTOR Vacuum Pump5257022355212082111.319.5 44.5120.814Vacuum BSP 3/8"Vacuum connection BSP 3/8"Compr. air connect. BSP 1/8"Exhaust air connect. BSP 1/4"solenoid valveVacuum ON/OFF solenoid valvequick releaseVacuum switchVacuum switch:- hysteresis poti regulator (or second switch-point)- regulator vacuum swith4-pole plug M8mounting holesØ 3.5 mmregulator for quick releasecompr. air connect. BSP 1/2", both sides1552814block 4: 120block 8: 2087.51845.5 60121exhaust airBSP 3/4", both sideselectric vacuum switchVacuum ON/OFF quick releaseEjector Operat. Comp. air max. Suction air flow (in Nl/min) at the respective vacuum (in mbar)type press. consump. Vacuum 0 -50 -100 -150 -200 -300 -400 -500 -600 -700 -800 -900K50 5.5 bar 50 Nl/min -910 mbar 74 70 66 60 53 36 23 18 13 8 3.5 1K75 5.4 bar 74 Nl/min -920 mbar 110 105 96 86 74 50 33 26 19 11 5 1.2K100 5.4 bar 99 Nl/min -930 mbar 165 155 140 122 105 68 46 36 26 14 7 1.5K150 5.4 bar 150 Nl/min -930 mbar 175 166 155 144 130 102 70 50 36 21 10 2K200 5.3 bar 194 Nl/min -920 mbar 240 230 220 200 180 140 96 64 45 26 12 2.5Technical data: MULTIJECTOR® KBSP 1/8" compressed air BSP 3/8" VacuumBSP 1/4" exhaust air22 125010544342714.5 3mounting holes, Ø3.5Compact-ejector MULTIJECTOR® K „Basic“Compact-ejector MULTIJECTOR® KVacuum manifold block MULTIJECTOR® KVariants and model numbers Design (+ with, - without)Modelno. Description Main Blow off Vacuum valve valve switch110.500 Multijector K50 Basic – – –110.501 Multijector K50 S + – –110.502 Multijector K50 SA + + –110.503 Multijector K50 SV + – +110.504 Multijector K50 SAV + + +110.510 Multijector K75 Basic – – –110.511 Multijector K75 S + – –110.512 Multijector K75 SA + + –110.513 Multijector K75 SV + – +110.514 Multijector K75 SAV + + +110.520 Multijector K100 Basic – – –110.521 Multijector K100 S + – –110.522 Multijector K100 SA + + –110.523 Multijector K100 SV + – +110.524 Multijector K100 SAV + + +110.530 Multijector K150 Basic – – –110.531 Multijector K150 S + – –110.532 Multijector K150 SA + + –110.533 Multijector K150 SV + – +110.534 Multijector K150 SAV + + +110.540 Multijector K200 Basic – – –110.541 Multijector K200 S + – –110.542 Multijector K200 SA + + –110.543 Multijector K200 SV + – +110.544 Multijector K200 SAV + + +Manifold block-modules for combining several compact-ejectors MULTIJECTOR® K to vacuum manifold (not suitable for „Basic“)110.550 Manifold block K4, for up to 4 compact-ejectors, incl. screws / gaskets110.551 Manifold block K8, for up to 8 compact-ejectors, incl. screws / gaskets110.552 Blind plate for manifold blocks K, for empty positions incl. screws / gasketsConnection plugs and cables for solenoid valves110.604 Connection cable 5 m, Polyurethane, incl. plug, incl. LED110.606 Connection plug, incl. LED, without cable110.607 Connection plug, without LED, without cableConnection plugs for vacuum switch110.601 Connection cable 5 m, Polyurethane, incl. plug6General dataTotal weight 0.2 kg compact-ejector „Basic“ 0.4 kg compact-ejector incl. main-, blow off valve and vacuum switchMaterials Ejector: Aluminium, Nitrile-gaskets SS-screw connections Solenoid valves: plastic housing, Aluminium, brass, Polyurethane-gaskets Vacuum switch/housing: PC + POM plasticsCompressed air 3 - 7 bar (opt. 5 - 6 bar), dry + cleanOper. temp. range Ejector -20 up to +80°C Solenoid valves -15 up to +60°C Vacuum switch -20 up to +70°CSolenoid valves 24 VDC, 1.2 W, NC (NO on request)Vacuum switches 10.8 - 30 VDC, exit PNP 80mA max. IP-classes Solenoid valves with plug: IP 65 Vacuum switch: IP 40The MULTIJECTOR® K series is our youngest ejector family and worldwide the first multiple stage compact-ejector. With this compact-ejector you really save compressed air at auto-mation applications and lower your overhead expenses. It is unbelievable how lavish many single stage compact-ejectors are with com-pressed air. We are glad about that, because this way a newly bought MULTIJECTOR® K can often pay for itself in less than one year.The MULTIJECTOR® K is space and energy-saving and was developed by us especially for handling and automation applications. Right now five different performance stages in three designs are available:Compact-Ejector MULTIJECTOR K „Basic“ A space-saving vacuum ejector to be controlled by existing valves (by customers).Compact-Ejector MULTIJECTOR KOur real compact-ejector for automation with integrated valves and vacuum switch. Choose the functions needed for your application:• Main valve: integrated solenoid valve for controlling the ejector function ON/OFF• Blow off valve: solenoid valve for blowing back into the vacuum line and therefore offering fast release of the part which is held. The intensity of the blowing off is adjustable by an adjusting screw directly at the compact-ejector.• Vacuum switch: Electric vacuum switch, either with adjustable switching point and adjustable hysteresis (analogous output of the present vacuum level) or with two adjustable switching pointsVacuum manifold blockAvailable as combined vacuum manifold with up to 4 or 8 compact-ejectors. Coordinate the detailed configuration with us.Standard delivery volume• Exhaust air silencer with Ø20*70 mm, G1/4“. PE-HD• Filter sieve inserted in vacuum connection (not on „Basic“)• Vacuum non return valve (avoids system vacuum leakage), enclosed loose• Please order plugs for solenoid valves and vacuum switches separately.compressed air savings upto 50%in comparison to usual one-stage compact-ejectorsThe Volkmann MULTIJECTOR® K7General Data M + ML SeriesVacuum: max. 91 % (-910 mbar)Suction air flow: 180 to 1450 Nl/minOperating pressure: 2 to 6 bar M-types opt. 5.6 bar ML-types opt. 3.5 barOperating noise: 55 to 78 dB(A) (with FD-silencer)Oper. temp.range: -20 to +80 °CMaterials: Aluminium, Stainl. Steel, Nitril, Polyethylene-HD, silicone-freeType Model No. Width B WeightM 90 110.141 52 mm 0.7 kg M 180 110.142 65 mm 0.8 kg M 270 110.143 88 mm 1.0 kg M 360 110.144 110 mm 1.4 kg M 450 110.145 133 mm 1.7 kg M 540 110.146 156 mm 1.9 kg ML 50 110.180 52 mm 0.7 kg ML 100 110.181 65 mm 0.8 kg ML 150 110.182 88 mm 1.0 kg ML 200 110.183 110 mm 1.4 kg ML 250 110.184 133 mm 1.7 kg ML 300 110.185 156 mm 1.9 kg Order Optionswith FD-silencer: Model No. + FDwith Viton gaskets/flaps: Model No. + Vwith vacuum non return valve: Model No. + HOrder Example: M 270 with FD-silen-cer plus Viton gaskets: Model No. 110.143FDVM 450 ML 250M 540 ML 300M 90 ML 50M 180 ML 100M 270 ML 150M 360 ML 200More detailed information can be found on the last double-page of this catalogue.11,5 34.5 52 74 24196compressed airBSP 1/8"VacuumBSP 1/8" (plugged)Vacuum (main)BSP 3/4"mounting holes4 x M5exhaust airBSP 3/4"B115513017.553FD-silencerØ 37mm G 3/4" (accessory)alternative position forvacuum gaugeVacuum gauge Ø 40mm BSP 1/8"11.5 34.5 52 74 24196Vacuum gauge Ø 40mm BSP 1/8"compressed airBSP 1/8"VacuumBSP 1/8" (plugged)Vacuum (main)Flange BSP 1", 8xM5on PCD 60 mm(accessory)mounting holes4 x M5exhaust air2 x BSP 3/4"11011551304417.553402 x FD-silencerØ 37mm BSP 3/4" (accessory)11.5 34.5 52 74 24196Vacuum gaugeØ 40mm G 1/8"compressed airBSP 1/4"VacuumBSP 1/8" (plugged)Vacuum (main)Flange BSP 1", 8xM5on PCD 60 mm (accessory)mounting holes4 x M5exhaust air3 x BSP 3/4"B115513017.553403 x FD-SilencerØ 37mm BSP 3/4" (accessory)4444Technical data: MULTIJECTOR® M & ML op. comp. air pres.consump. Suction air flow (in Nl/min) at the respective Vacuum (in mbar)Type bar Nl/min 0 -100 -200 -300 -400 -500 -600 -700 -800M 90 5.5 86 395 226 140 76 45 35 23 13 6 M 180 5.5 172 790 452 280 152 90 70 46 26 12 M 270 5.5 252 1185 678 420 228 135 105 69 39 18 M 360 5.5 344 1501 859 560 304 180 140 92 52 24 M 450 5.5 430 1876 1074 700 380 225 175 115 65 30 M 540 5.5 516 2252 1288 840 456 270 210 138 78 36 ML 50 3.5 50 181 93 52 25 21 17 12 6 2 ML 100 3.5 100 361 185 103 50 41 34 24 13 3 ML 150 3.5 150 542 278 155 75 62 51 36 19 5 ML 200 3.5 200 722 370 206 100 82 68 48 25 6 ML 250 3.5 250 903 463 258 125 103 85 60 31 8 ML 300 3.5 300 1083 555 309 150 123 102 72 38 9 max. Time in Seconds to evacuate a 1 m3 volume from atmospheric Vacuum pressure to stated vacuum level (in mbar)Type bar mbar -100 -200 -300 -400 -500 -600 -700 -800 -900M 90 5.5 -910 16 46 98 214 368 612 1024 1896 5072 M 180 5.5 -910 8 23 49 107 184 306 512 948 2536 M 270 5.5 -910 5 15 33 71 123 204 341 632 1690 M 360 5.5 -910 4 12 25 54 92 153 256 474 1268 M 450 5.5 -910 3 9 20 43 74 122 205 379 1014 M 540 5.5 -910 3 8 16 36 61 102 170 316 844 ML 50 3.5 -910 32 100 272 528 857 1342 3567 5596 26862 ML 100 3.5 -910 16 50 136 264 429 671 1212 2798 13431 ML 150 3.5 -910 11 33 91 176 286 447 1189 1865 8954 ML 200 3.5 -910 8 25 68 132 214 336 892 1399 6716 ML 250 3.5 -910 6 20 54 106 172 268 485 1119 5372 ML 300 3.5 -910 5 17 45 88 143 224 404 933 44778Multijector pumps of the M- and ML-series work with three ejector stages which are connected in a row. Their robust and compact aluminium casing makes the pump resistant even to strong mechanical or thermal loads. Nevertheless they are very light and offer considerable amounts of suction air at a small size. The compact form allows them to be mounted directly at the location where vacuum is needed.Their high efficiency makes the VOLKMANN Multijectors of the M- and ML-series the ideal vacuum pump for a multitude of different handling applications, for vacuum packing, vacuum testing, vacuum transportation, vacuum fixing, de-gassing of liquids and mixing, evacuation of small casting moulds etc.MULTIJECTOR® MThe optimal choice with the best efficiency. Vacuum pumps of this series are used when a compressed air supply of 6 bar is available: high suction power at a favourable price.MULTIJECTOR® MLIf the pressure in the compressed air supply line decreases frequently and nevertheless a high vacuum is needed, our Vacuum Pumps of the ML-series reach high vacuum levels with an inlet pressure of only 3.5 bar. They are the clever choice to ensure a high vacuum at low operating pressure and pressure variations.Standard delivery featuresAll pumps of the M- and ML-series incl. vacuum gauge and fixing device for easy mounting.OptionsIf the exhaust air is emitted directly into the surrounding, we recommend the usage of our FD-silencer (order option FD). The integrated vacuum non return valve prevents system vacuum leakage by back-flow through the pump when it is switched off, so that the vacuum is held longer inside the system (order option H). You get M-types with Viton-gaskets with the order-option V.Test Pumps can be sent to you for trials and approval.The Volkmann MULTIJECTOR® M9Type Model No. width weight compressed vacuum connect. vacuum flange exhaust- B air supply screw hole circle flange height air adaptor P+ PCD (accessory) h(Fl) (accessory)G 360 110.244 127 mm 5.5 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75G 540 110.254 127 mm 5.6 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75G 720 110.245 127 mm 5.7 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75G 900 110.246 150 mm 6.2 kg BSP 3/4“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75G 1260 110.247 195 mm 7.3 kg BSP 3/4“ 8 x M5 with PCD 110 BSP 2“ 49 mm 1 x Ø 75G 1800 110.248 262 mm 9.0 kg BSP 3/4“ 8 x M5 with PCD 110 BSP 2“ 49 mm 1 x Ø 75G 2700 110.249 375 mm 11.7 kg BSP 1“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 1 x Ø 75G 3600 110.250 487 mm 14.4 kg BSP 1“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 2 x Ø 75G 4500 110.251 600 mm 17.3 kg BSP 1“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 2 x Ø 75GL 200 110.315 127 mm 5.5 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75GL 300 110.325 127 mm 5.6 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75GL 400 110.316 127 mm 5.7 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75GL 500 110.317 150 mm 6.2 kg BSP 1/2“ 8 x M5 with PCD 80 BSP 1 1/2“ 39 mm 1 x Ø 75GL 700 110.318 195 mm 7.3 kg BSP 3/4“ 8 x M5 with PCD 110 BSP 2“ 49 mm 1 x Ø 75GL 1000 110.319 262 mm 9.0 kg BSP 3/4“ 8 x M5 with PCD 110 BSP 2“ 49 mm 1 x Ø 75GL 1500 110.320 375 mm 11.7 kg BSP 3/4“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 1 x Ø 75GL 2000 110.321 487 mm 14.4 kg BSP 1“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 2 x Ø 75GL 2500 110.322 600 mm 17.3 kg BSP 1“ 8 x M6 with PCD 160 BSP 2 1/2“ 49 mm 2 x Ø 75General data G+GL seriesVacuum: max. 91 % (-910 mbar)Suction air flow: 700 to 21000 Nl/minOperat. pressure: 2 to 6 bar G-Types opt. 5.6 bar GL-Types opt. 3.5 barOperating noise: 55 to 80 dB(A)Oper. temp. range: -20 to +60 °CMaterialis: Aluminium, Stainless Steel, Polyethylene-HD, brass, Nitrile, Silicone-freeOrder optionswith flange: Model No. + FLwith Viton-gaskets/flaps: Model No. + Vwith exhaust air adaptor: Model No. + AAwith vacuum non return valve: Model No. + HOrder exampleMultijector G 1800 with flange and Viton-gaskets = Model No. 110.248FLVTechnical data: MULTIJECTOR® G & GLB 85P+compr. air8125395Exhaustwith built insilencer37.5(75)110h(Fl) Vacuum-Flange(accessory)P-VacuumPCDexhaust air connectors1 (or 2) x NW75 (accessory)P+ op. comp. air pres. consump. Suction air flow (in Nl/min) at the respective Vacuum (in mbar)Type bar Nl/min 0 -100 -200 -300 -400 -500 -600 -700 -800G 360 5.5 344 1960 870 548 306 185 136 87 48 25G 540 5.5 516 2744 1305 822 459 278 204 131 72 38G 720 5.5 688 3250 1740 1096 612 369 272 173 96 51G 900 5.5 860 4063 2175 1370 765 461 340 216 120 64G 1260 5.5 1204 5688 3045 1918 1071 646 476 303 168 89 G 1800 5.5 1720 8125 4350 2740 1530 923 680 433 240 127 G 2700 5.5 2580 12188 6525 4110 2295 1384 1020 649 360 191 G 3600 5.5 3440 16250 8700 5480 3060 1845 1360 865 480 254 G 4500 5.5 4300 20313 10875 6850 3825 2306 1700 1081 600 318 GL 200 3.5 200 916 389 228 99 80 65 48 27 6 GL 300 3.5 300 1373 584 341 148 120 98 72 41 9 GL 400 3.5 400 1831 778 455 197 160 131 95 53 13 GL 500 3.5 500 2288 972 568 246 200 164 119 66 16 GL 700 3.5 700 3203 1361 795 344 280 230 167 92 22 GL 1000 3.5 1000 4576 1944 1136 492 400 327 238 133 31 GL 1500 3.5 1500 6864 2916 1704 738 600 491 357 199 47 GL 2000 3.5 2000 9152 3888 2272 984 800 654 476 265 63 GL 2500 3.5 2500 11440 4860 2840 1230 1000 818 595 332 79 max. Time in Seconds to evacuate a 1 m3 volume from atmospheric Vacuum pressure to stated vacuum level (in mbar)Type bar mbar -100 -200 -300 -400 -500 -600 -700 -800 -900G 360 5.5 -910 2.5 9.5 23 46 80 136 244 444 1271 G 540 5.5 -910 1.7 6.3 15 31 53 91 163 296 847 G 720 5.5 -910 1.3 4.8 11 23 40 68 122 222 636 G 900 5.5 -910 1.0 3.8 9 18 32 54 98 178 508 G 1260 5.5 -910 0.7 2.7 6 13 23 39 70 127 363 G 1800 5.5 -910 0.5 1.9 5 9 16 27 49 89 254 G 2700 5.5 -910 0.3 1.3 3 6 11 18 33 59 169 G 3600 5.5 -910 0.3 1.0 2 5 8 14 24 44 127 G 4500 5.5 -910 0.2 0.8 2 4 6 11 20 36 102 GL 200 3.5 -910 6.5 21.0 56 116 190 299 494 1158 5193 GL 300 3.5 -910 4.3 14.0 37 77 127 199 329 772 3462 GL 400 3.5 -910 3.3 10.5 28 58 95 150 247 579 2597 GL 500 3.5 -910 2.6 8.4 22 46 76 120 198 463 2077 GL 700 3.5 -910 1.9 6.0 16 33 54 85 141 331 1484 GL 1000 3.5 -910 1.3 4.2 11 23 38 60 99 232 1039 GL 1500 3.5 -910 0.9 2.8 7 15 25 40 66 154 692 GL 2000 3.5 -910 0.7 2.1 6 12 19 30 49 116 519 GL 2500 3.5 -910 0.5 1.7 4 9 15 24 40 93 415More detailed information can be found on the last double-pages of this catalogue.10Our Multijector Vacuum Pumps of the G- and GL-series are four-stage ejectors and offer an even better efficiency especially at free aspiration and low vacuum. They consist of a light and nevertheless tough modular Aluminium design. As usual for Multijectors, also this pump family can be installed easily: Just connect compressed air- and vacuum line, that‘s all.The G- and GL-series are our top-models for fast evacuation of big volumes and for achieving high suction performance, e. g. for evacuation of casting-, press- and deep-drawing moulds, for vacuum conveying, for suction of abrasives and handling of heavy parts with high leakage risks. Also in the graphical and printing industries they are used successfully - not only for creation of vacuum but often also for fanning out and seperating paper sheets.MULTIJECTOR® G – the optimum if 6 bar operating pressure are available because they are the most efficient.MULTIJECTOR® GL – the safe choice at low operating pressure or if strong pressure variations have to be taken into account because they achieve their maximum vacuum at only 3.5 bar inlet pressure.Standard delivery featuresAll Multijector G- and GL-types are equipped with vacuum- and pressure-gauge a well as with integrated valve and hand switch for turning the pump ON/OFF manually. Furthermore a direct remote control of this Multijector can be done via mini-couplings by a pneumatic signal, only control air is needed. The pump is supplied with an integrated silencer.Order optionsSuitable vacuum flanges are delivered together with the pump if you choose the order option FL. Please order the pump variant with exhaust air adaptor (order option AA) if the exhaust air shall be drawn off centrally. The optionally integrated vacuum non return valve prevents system vacuum leakage by back-flow through the pump when it is switched off so that the vacuum is held longer (order option H). G-types with Viton gaskets can be ordered with the option V.Test Pumps can be sent to you for trials and approval.The Volkmann MULTIJECTOR® G11DescriptionMultijectors of the MRVA- and MRVAC-series are three stage ejectors in a round stainless steel design. This Multijector-type offers an enormous suction performance of up to 4.5 times the used compressed air and up to -910 mbar vacuum at very compact size. As the MRVA vacuum generators are made of high-quality resistant materials (stainless steel AISI 304 and Viton-gaskets are standard, options: stainless steel AISI 316L and others, PTFE-coated gaskets), they are ideal for applications where aggressive drawn-off media or critical ambience conditions have to be taken into consideration.Furthermore the Multijector MRVAC is the first CIP-able multiple stage ejector pump and can completely be rinsed inside from the vacuum side in installed state. The cleansing liquid leaves the MRVAC through the exhaust air opening (fitting position: exhaust air opening at the bottom). Vacuum- and exhaust air opening of the MRVAC are equipped with clamp-connection pieces.Technical data M270 RVA M360 RVA M270 RVAC M360 RVACMax. vacuum: -900 mbar Max. Suction air flow: 1150 Nl/min 1450 Nl/minCompr. air consumption: 252 Nl/min 344 Nl/minOperating pressure: 3 - 6 barOpt. operating pressure: 5.6 barOperating noise: 55-78 dB(A)Weight: 2.5 kg 2.6 kgOperable temp. range: -20 to +80°C Materials: AISI 304, Viton (optional AISI316L/PTFE)Please inquire separately for special materials.Suction air flow (in Nl/min) at the respective Vacuum (in mbar)Typ -0 -100 -200 -300 -400 -500 -600 -700 -800M270 1150 660 420 228 135 105 69 39 18M360 1450 810 560 304 180 140 92 52 24Time in Seconds to evacuate a 1 m3 volume from atmospheric pressure to stated vacuum level (in mbar)Typ -100 -200 -300 -400 -500 -600 -700 -800 -900M270 6 16 34 72 124 205 350 650 1700M360 5 13 26 55 93 155 265 490 1300• wear- and maintenance-free• good chemical resistance• easy installation• compact size• oil-free operation• CIP-ableModel No. Type 110.703 MULTIJECTOR® M270 RVAC110.704 MULTIJECTOR® M360 RVACMULTIJECTOR® MRVA and MRVACThe first multiple stage ejector completely made of stainless steel261214 172Ø76Exhaust airClamp NW40BSP 1/4" Compressed air196VacuumClamp NW40Exhaust airVacuumCompressed airModel No. Type 110.693 MULTIJECTOR® M270 RVA110.694 MULTIJECTOR® M360 RVABSP 1"190818 20Ø40BSP 1/4" Compressed airExhaust airVacuum826BSP 1"Ø76BSP 1" VacuumBSP 1" Exhaust airCompressed airBSP 1/4"12Electric and pneumaticvacuum switches and vacuum accessoriesIn our extensive accessory program you will find nearly everything for your vacuum application. Ask for the necessary brochures right now.Vacuum switches and controlsOur program includes purely pneumatic, electric and digital vacuum switches. Choose variants with two separately adjustable switching points or adjustable hysteresis. Measure the present vacuum with vacuum switches with analogous output. Use our vacuum controls if you want to keep the vacuum in a previously adjusted target area without additional control requirements. The sensors automatically takes over the control of the solenoid valves.Vacuum filters – A wide variety of filters are available for your vacuum application.Vacuum flangesAsk for special design flanges according to your individual specifications. We can quickly manufacture and supply high quality low cost flanges to your exact requirements.Vacuum suction cupsWe manufacture and supply over 300 different types of suction cups. From mini-flat suction cups for handling electronic assemblies to our bellow suction cups with integrated stroke (e. g. for packing machines), flat suction cups for printing machines, transparent suction cups for Pharma/Food-applications (FDA) up to large diameter suction cups for parts of heavy item. You can also choose between different materials. We are sure you will find a suitable suction cup at a favourable price in our delivery program or we can design and manufacture a cup to meet your individual secifications.13VACUUMaccessoriesAll data feature a measuring inaccuracy of approx ± 3 %. Suction air flow (in Nl/min) Time in Seconds to evacuate a 1 m3 volume from at the respective Vacuum (in mbar) atmospheric pressure to stated vacuum level (in mbar) 0 -100 -200 -300 -400 -500 -600 -700 -800 -100 -200 -300 -400 -500 -600 -700 -800 -9006 -910 93 413 245 145 88 45 34 23 14 5 14 42 94 198 360 608 1016 1932 5132 5.5 -910 86 395 226 140 76 45 35 23 13 6 16 46 98 214 368 612 1024 1896 5072 5 -850 80 380 205 125 63 46 33 16 6 4 16 50 118 232 384 676 1460 2624 4.5 -700 73 363 188 106 56 46 30 11 2 18 54 132 248 408 812 3744 4 -630 67 343 166 97 54 40 21 5 20 64 152 270 480 1320 3.5 -560 60 317 145 71 51 28 8 22 74 168 308 700 3 -490 54 292 123 65 45 20 26 90 202 406 6 -910 186 825 490 290 176 90 68 46 28 10 7 21 47 99 180 304 508 966 2566 5.5 -910 172 790 452 280 152 90 70 46 26 12 8 23 49 107 184 306 512 948 2536 5 -850 160 760 410 250 126 92 66 32 12 8 8 25 59 116 192 338 730 1312 4.5 -700 146 725 375 212 111 92 60 22 4 9 27 66 124 204 406 1872 4 -630 134 685 332 193 108 80 42 10 10 32 76 135 240 660 3.5 -560 120 634 290 142 102 56 16 11 37 84 154 350 3 -490 108 584 245 130 90 40 13 45 101 203 6 -910 279 1238 735 435 264 135 102 69 42 15 5 14 31 66 120 203 339 644 1710 5.5 -910 252 1185 678 420 228 135 105 69 39 18 5 15 33 71 123 204 341 632 1690 5 -850 240 1140 615 375 189 138 99 48 18 12 5 17 39 77 128 225 487 874 4.5 -700 219 1088 563 318 167 138 90 33 6 6 18 44 83 136 271 1248 4 -630 201 1028 498 290 162 120 63 15 7 21 51 90 160 440 3.5 -560 180 951 435 213 153 84 24 7 25 56 103 233 3 -490 162 876 368 195 135 60 9 30 67 135 6 -910 372 1568 931 580 352 180 136 92 56 20 4 11 24 50 90 152 254 483 1283 5.5 -910 344 1501 859 560 304 180 140 92 52 24 4 12 25 54 92 153 256 474 1268 5 -850 320 1444 779 500 252 184 132 64 24 16 4 13 30 58 96 169 365 656 4.5 -700 292 1378 713 424 222 184 120 44 8 5 14 33 62 102 203 936 4 -630 268 1302 631 386 216 160 84 20 5 16 38 68 120 330 3.5 -560 240 1205 551 284 204 112 32 6 19 42 77 175 3 -490 216 1110 466 260 180 80 7 23 51 102 6 -910 465 1959 1164 725 440 225 170 115 70 25 3 8 19 40 72 122 203 386 1026 5.5 -910 430 1876 1074 700 380 225 175 115 65 30 3 9 20 43 74 122 205 379 1014 5 -850 400 1805 974 625 315 230 165 80 30 20 3 10 24 46 77 135 292 525 4.5 -700 365 1722 891 530 278 230 150 55 10 4 11 26 50 82 162 749 4 -630 335 1627 789 483 270 200 105 25 4 13 30 54 96 264 3.5 -560 300 1506 689 355 255 140 40 4 15 34 62 140 3 -490 270 1387 582 325 225 100 5 18 40 81 6 -910 558 2351 1397 870 528 270 204 138 84 30 2 7 16 33 60 101 169 322 854 5.5 -910 516 2252 1288 840 456 270 210 138 78 36 3 8 16 36 61 102 170 316 844 5 -850 480 2166 1169 750 378 276 198 96 36 24 3 8 20 39 64 113 243 437 4.5 -700 438 2066 1069 636 333 276 180 66 12 3 9 22 41 68 135 623 4 -630 402 1952 946 579 324 240 126 30 3 11 25 45 80 220 3.5 -560 360 1807 827 426 306 168 48 4 12 28 51 117 3 -490 324 1664 698 390 270 120 4 15 34 68 6 -910 372 1980 950 593 361 180 136 92 54 23 2.0 9.0 20 43 79 137 230 451 1286 5.5 -910 344 1960 870 548 306 185 136 87 48 25 2.5 9.5 23 46 80 136 244 444 1271 5 -850 320 1940 795 508 263 180 135 70 28 20 2.5 10.0 25 50 86 151 317 604 4.5 -700 292 1850 685 445 227 161 121 50 5 3.5 11.5 29 55 93 178 781 4 -630 268 1750 620 365 226 161 94 24 5.0 13.0 33 62 108 265 3.5 -560 240 1650 575 306 208 136 55 5.0 16.0 38 69 152 3 -490 216 1500 525 266 183 93 4.5 19.0 43 85 6 -910 558 2772 1425 890 542 270 204 138 81 35 1.3 6.0 13 28 53 91 153 301 857 5.5 -910 516 2744 1305 822 459 278 204 131 72 38 1.7 6.3 15 31 53 91 163 296 847 5 -850 480 2716 1193 762 395 270 203 105 42 30 1.7 6.7 16 33 57 101 211 403 4.5 -700 438 2590 1028 668 341 242 182 75 8 2.3 7.7 19 37 62 119 521 4 -630 402 2450 930 548 339 242 141 36 3.3 8.7 22 41 72 177 3.5 -560 360 2310 863 459 312 204 83 3.3 10.7 25 46 101 3 -490 324 2100 788 399 275 140 3.0 12.7 28 57 6 -910 744 3350 1900 1185 721 359 272 184 107 46 1.0 4.5 10 21 40 69 115 226 643 5.5 -910 688 3250 1740 1096 612 369 272 173 96 51 1.3 4.8 11 23 40 68 122 222 636 5 -850 640 3200 1590 1016 526 359 270 140 56 39 1.3 5.0 12 25 43 76 159 302 4.5 -700 584 3050 1370 889 453 322 242 99 10 1.8 5.8 15 28 47 89 391 4 -630 536 2850 1240 729 451 322 187 47 2.5 6.5 16 31 54 133 3.5 -560 480 2650 1150 612 415 271 110 2.5 8.0 19 35 76 3 -490 432 2400 1050 532 366 186 2.3 9.5 21 43 6 -910 930 4188 2375 1481 901 449 340 230 134 57 0.8 3.6 8 17 32 55 92 180 514 5.5 -910 860 4063 2175 1370 765 461 340 216 120 64 1.0 3.8 9 18 32 54 98 178 508 5 -850 800 4000 1988 1270 658 449 338 174 70 49 1.0 4.0 10 20 34 60 127 242 4.5 -700 730 3813 1713 1111 566 403 303 124 12 1.4 4.6 12 22 37 71 312 4 -630 670 3563 1550 911 564 403 234 59 2.0 5.2 13 25 43 106 3.5 -560 600 3313 1438 765 519 339 138 2.0 6.4 15 28 61 3 -490 540 3000 1313 665 458 233 1.8 7.6 17 34 6 -910 1302 5863 3325 2074 1262 628 476 322 187 80 0.6 2.6 6 12 23 39 66 129 367 5.5 -910 1204 5688 3045 1918 1071 646 476 303 168 89 0.7 2.7 6 13 23 39 70 127 363 5 -850 1120 5600 2783 1778 921 628 473 244 98 68 0.7 2.9 7 14 25 43 91 173 4.5 -700 1022 5338 2398 1556 793 564 424 173 17 1.0 3.3 8 16 27 51 223 4 -630 938 4988 2170 1276 789 564 327 83 1.4 3.7 9 18 31 76 3.5 -560 840 4638 2013 1071 726 474 193 1.4 4.6 11 20 43 3 -490 756 4200 1838 931 641 326 1.3 5.4 12 24 6 -910 1860 8375 4750 2963 1803 898 680 460 268 114 0.4 1.8 4 9 16 27 46 90 257 5.5 -910 1720 8125 4350 2740 1530 923 680 433 240 127 0.5 1.9 5 9 16 27 49 89 254 5 -850 1600 8000 3975 2540 1315 898 675 349 140 98 0.5 2.0 5 10 17 30 63 121 4.5 -700 1460 7625 3425 2223 1133 805 605 248 24 0.7 2.3 6 11 19 36 156 4 -630 1340 7125 3100 1823 1128 805 468 118 1.0 2.6 7 12 22 53 3.5 -560 1200 6625 2875 1530 1038 678 275 1.0 3.2 8 14 30 3 -490 1080 6000 2625 1330 915 465 0.9 3.8 9 17 6 -910 2790 12563 7125 4444 2704 1346 1020 690 401 171 0.3 1.2 3 6 11 18 31 60 171 5.5 -910 2580 12188 6525 4110 2295 1384 1020 649 360 191 0.3 1.3 3 6 11 18 33 59 169 5 -850 2400 12000 5963 3810 1973 1346 1013 523 209 146 0.3 1.3 3 7 11 20 42 81 4.5 -700 2190 11438 5138 3334 1699 1208 908 371 36 0.5 1.5 4 7 12 24 104 4 -630 2010 10688 4650 2734 1691 1208 701 177 0.7 1.7 4 8 14 35 3.5 -560 1800 9938 4313 2295 1556 1016 413 0.7 2.1 5 9 20 3 -490 1620 9000 3938 1995 1373 698 0.6 2.5 6 11 6 -910 3720 16750 9500 5925 3605 1795 1360 920 535 228 0.2 0.9 2 4 8 14 23 45 129 5.5 -910 3440 16250 8700 5480 3060 1845 1360 865 480 254 0.3 1.0 2 5 8 14 24 44 127 5 -850 3200 16000 7950 5080 2630 1795 1350 698 279 195 0.3 1.0 2 5 9 15 32 60 4.5 -700 2920 15250 6850 4445 2265 1610 1210 495 49 0.4 1.2 3 6 9 18 78 4 -630 2680 14250 6200 3645 2255 1610 935 236 0.5 1.3 3 6 11 27 3.5 -560 2400 13250 5750 3060 2075 1355 550 0.5 1.6 4 7 15 3 -490 2160 12000 5250 2660 1830 930 0.5 1.9 4 9 6 -910 4650 20938 11875 7406 4506 2244 1700 1150 669 284 0.2 0.7 2 3 6 11 18 36 103 5.5 -910 4300 20313 10875 6850 3825 2306 1700 1081 600 318 0.2 0.8 2 4 6 11 20 36 102 5 -850 4000 20000 9938 6350 3288 2244 1688 872 349 244 0.2 0.8 2 4 7 12 25 48 4.5 -700 3650 19063 8563 5556 2831 2013 1513 619 61 0.3 0.9 2 4 7 14 62 4 -630 3350 17813 7750 4556 2819 2013 1169 295 0.4 1.0 3 5 9 21 3.5 -560 3000 16563 7188 3825 2594 1694 688 0.4 1.3 3 6 12 3 -490 2700 15000 6563 3325 2288 1163 0.4 1.5 3 7 operatingpressure(bar)max.Vacuum(mbar)compr. airconsump.(Nl/min)M 90M 180M 270M 360M 450M 540G 360G 540G 720G 900G 1260G 1800G 2700G 3600G 4500Suction air flow and evacuation times at different operating pressuresMULTIJECTOR® M and G: optimum 5.6 bar 14operatingpressure(bar)max.Vacuum(mbar)compr. airconsump.(Nl/min)ML 50ML 100ML 150ML 200ML 250ML 300GL 200GL300GL 400GL 500GL 700GL 1000GL 1500GL 2000GL 2500Suction air flow and evacuation times at different operating pressuresMULTIJECTOR® ML and GL: optimum 3.5 bar Technical data for combined vacuum + pressure operation is available on request. 15 Suction air flow (in Nl/min) Time in Seconds to evacuate a 1 m3 volume from at the respective Vacuum (in mbar) atmospheric pressure to stated vacuum level (in mbar) 0 -100 -200 -300 -400 -500 -600 -700 -800 -100 -200 -300 -400 -500 -600 -700 -800 -9004.5 -890 60 194 115 74 44 20 16 11 6 2 26 81 191 437 782 1256 2054 40054 -900 56 189 99 65 31 20 16 12 7 2 29 92 234 506 848 1311 2073 3961 202623.5 -910 50 181 93 52 25 21 17 12 6 2 32 100 272 528 857 1342 3567 5596 268623 -730 44 169 85 43 27 22 15 8 36 121 293 542 894 1579 44252.5 -620 39 156 74 33 28 19 9 40 150 333 611 1196 48882 -480 33 137 60 30 19 6 54 198 469 11144.5 -890 120 388 229 148 87 39 32 23 13 3 13 41 95 218 391 628 1027 20024 -900 112 377 197 130 62 40 33 24 14 4 15 46 117 253 424 655 1036 1980 101313.5 -910 100 361 185 103 50 41 34 24 13 3 16 50 136 264 429 671 1212 2798 134313 -730 88 337 170 85 54 44 31 16 18 60 147 271 447 790 22132.5 -620 78 312 147 66 55 39 18 20 75 167 306 598 24442 -480 66 274 120 61 37 13 27 99 235 5574.5 -890 180 582 344 222 131 59 48 34 19 5 9 27 64 146 261 419 685 13354 -900 168 566 296 195 93 60 49 36 21 6 10 31 78 169 283 437 691 1320 67543.5 -910 150 542 278 155 75 62 51 36 19 5 11 33 91 176 286 447 1189 1865 89543 -730 132 506 255 128 81 66 46 23 12 40 98 181 298 526 14752.5 -620 117 468 221 98 83 58 27 13 50 111 204 399 16292 -480 99 411 180 91 56 19 18 66 156 3714.5 -890 240 776 458 296 174 78 64 45 25 6 7 20 48 109 196 314 514 10014 -900 224 754 394 260 124 80 65 48 28 8 7 23 59 126 212 328 518 990 50663.5 -910 200 722 370 206 100 82 68 48 25 6 8 25 68 132 214 336 892 1399 67163 -730 176 674 340 170 108 88 61 31 9 30 73 136 224 395 11062.5 -620 156 624 294 131 110 77 36 10 38 83 153 299 1222 2 -480 132 548 240 121 74 25 14 50 117 2794.5 -890 300 970 573 370 218 98 80 56 31 8 5 16 38 87 156 251 411 801 4 -900 280 943 493 325 155 100 81 60 35 10 6 18 47 101 170 262 414 792 40523.5 -910 250 903 463 258 125 103 85 60 31 8 6 20 54 106 172 268 485 1119 53723 -730 220 843 425 213 135 110 76 39 7 24 59 108 179 316 8852.5 -620 195 780 368 164 138 96 45 8 30 67 122 239 9782 -480 165 685 300 151 93 31 11 40 94 223 4.5 -890 360 1164 687 444 261 117 96 68 38 9 4 14 32 73 130 209 342 6674 -900 336 1131 591 390 186 120 98 72 42 12 5 15 39 84 141 218 345 660 33773.5 -910 300 1083 555 309 150 123 102 72 38 9 5 17 45 88 143 224 404 933 44773 -730 264 1011 510 255 162 132 92 47 6 20 49 90 149 263 7382.5 -620 234 936 441 197 165 116 54 7 25 56 102 199 8152 -480 198 822 360 182 111 38 9 33 78 1864.5 -890 240 1036 492 311 177 76 62 45 24 8 5.5 18.0 39 86 166 294 481 10224 -900 224 988 432 272 128 78 64 47 27 9 6.0 19.5 45 105 180 289 478 976 51603.5 -910 200 916 389 228 99 80 65 48 27 6 6.5 21.0 56 116 190 299 494 1158 51933 -730 172 854 364 183 106 82 61 34 8 7.5 26.0 65 119 171 341 9122.5 -620 156 789 318 138 108 73 37 6 9.5 31.5 72 129 249 7632 -480 132 700 248 122 75 30 11.5 41.5 94 2244.5 -890 360 1554 738 466 266 114 93 68 36 12 3.7 12.0 26 57 111 196 321 6814 -900 336 1482 648 407 191 117 96 71 41 14 4.0 13.0 30 70 120 193 319 651 34403.5 -910 300 1373 584 341 148 120 98 72 41 9 4.3 14.0 37 77 127 199 329 772 34623 -730 258 1281 546 275 158 123 92 51 12 5.0 17.3 43 79 114 227 6082.5 -620 234 1184 477 207 162 110 56 9 6.3 21.0 48 86 166 5092 -480 198 1049 372 182 112 45 7.7 27.7 63 1494.5 -890 480 2072 984 621 354 153 124 90 49 17 2.8 9.0 19 43 83 147 241 5114 -900 448 1976 864 543 255 157 128 94 54 18 3.0 9.8 23 52 90 145 239 488 25803.5 -910 400 1831 778 455 197 160 131 95 53 13 3.3 10.5 28 58 95 150 247 579 25973 -730 344 1708 728 366 211 165 123 68 15 3.8 13.0 32 59 86 171 4562.5 -620 312 1578 636 276 216 146 74 12 4.8 15.8 36 65 125 3822 -480 264 1399 496 243 149 61 5.8 20.8 47 1124.5 -890 600 2590 1230 776 442 191 155 112 61 21 2.2 7.2 15 34 66 118 192 4094 -900 560 2470 1079 678 318 196 160 117 68 23 2.4 7.8 18 42 72 116 191 390 20643.5 -910 500 2288 972 568 246 200 164 119 66 16 2.6 8.4 22 46 76 120 198 463 20773 -730 430 2134 909 457 263 206 153 85 19 3.0 10.4 26 47 68 136 3652.5 -620 390 1972 794 344 270 183 93 15 3.8 12.6 29 52 100 3052 -480 330 1748 620 303 186 76 4.6 16.6 38 904.5 -890 840 3626 1722 1086 619 267 217 157 85 29 1.6 5.1 11 24 47 84 137 2924 -900 784 3458 1511 949 445 274 224 164 95 32 1.7 5.6 13 30 51 83 137 279 14743.5 -910 700 3203 1361 795 344 280 230 167 92 22 1.9 6.0 16 33 54 85 141 331 14843 -730 602 2988 1273 640 368 288 214 119 27 2.1 7.4 18 34 49 97 2612.5 -620 546 2761 1112 482 378 256 130 21 2.7 9.0 20 37 71 2182 -480 462 2447 868 424 260 106 3.3 11.9 27 644.5 -890 1200 5180 2460 1551 884 382 310 224 122 42 1.1 3.6 8 17 33 59 96 204 4 -900 1120 4940 2158 1356 636 392 320 234 136 46 1.2 3.9 9 21 36 58 96 195 10323.5 -910 1000 4576 1944 1136 492 400 327 238 133 31 1.3 4.2 11 23 38 60 99 232 10393 -730 860 4268 1818 914 526 412 307 170 38 1.5 5.2 13 24 34 68 182 2.5 -620 780 3944 1588 688 540 366 186 30 1.9 6.3 14 26 50 153 2 -480 660 3496 1240 606 372 152 2.3 8.3 19 45 4.5 -890 1800 7770 3690 2327 1326 573 465 336 183 63 0.7 2.4 5 11 22 39 64 1364 -900 1680 7410 3237 2034 954 588 480 351 204 68 0.8 2.6 6 14 24 39 64 130 6883.5 -910 1500 6864 2916 1704 738 600 491 357 199 47 0.9 2.8 7 15 25 40 66 154 6923 -730 1290 6402 2727 1371 789 618 460 255 57 1.0 3.5 9 16 23 45 1222.5 -620 1170 5916 2382 1032 810 549 279 45 1.3 4.2 10 17 33 1022 -480 990 5244 1860 909 558 228 1.5 5.5 13 304.5 -890 2400 10360 4920 3102 1768 764 620 448 244 84 0.6 1.8 4 9 17 29 48 1024 -900 2240 9880 4316 2712 1272 784 640 468 272 91 0.6 2.0 5 10 18 29 48 98 5163.5 -910 2000 9152 3888 2272 984 800 654 476 265 63 0.7 2.1 6 12 19 30 49 116 5193 -730 1720 8536 3636 1828 1052 824 613 340 76 0.8 2.6 6 12 17 34 912.5 -620 1560 7888 3176 1376 1080 732 372 60 1.0 3.2 7 13 25 762 -480 1320 6992 2480 1212 744 304 1.2 4.2 9 22 4.5 -890 3000 12950 6150 3878 2210 955 775 560 305 105 0.4 1.4 3 7 13 24 38 824 -900 2800 12350 5395 3390 1590 980 800 585 340 114 0.5 1.6 4 8 14 23 38 78 4133.5 -910 2500 11440 4860 2840 1230 1000 818 595 332 79 0.5 1.7 4 9 15 24 40 93 4153 -730 2150 10670 4545 2285 1315 1030 767 425 95 0.6 2.1 5 9 14 27 732.5 -620 1950 9860 3970 1720 1350 915 465 75 0.8 2.5 6 10 20 612 -480 1650 8740 3100 1515 930 380 0.9 3.3 8 18© 2001, VOLKMANN GmbH, Soest, Germany. Technical data is subject to change without notice. Version D05-2000/E04-2001. MULTIJECTOR® is a registered trademark of Volkmann GmbH.Get all the informationon the Internet:www.volkmann-vacuum.com• DWG/DXF/IGES files for download• new products and special applications• actual brochures (PDF)• Internet forms for immediate contact• Hints and know-howVOLKMANN GmbHVakuumtechnikSchloitweg 1759494 SoestGermanyTel. ++49 (0) 2921 96040 Fax ++49 (0) 2921 63839eMail: info@volkmann-vakuum.deVOLKMANN UK LimitedVacuum TechnologyP.O. Box 2200MarlowBucks, SL7 2LWGreat BritainTel. ++44 (0) 1628 473193 Fax ++44 (0) 1628 475265eMail: info.uk@volkmann-vacuum.com