Valco Products Presentation - Brochure

WATER And PUMPSARE ESSEnTIAL foR LIfE PUMPS, MOTORS and COnTROLS ManUFaCTURInGManufacturing GroupEstablished in Italy in 1976 WorldwideMade in italyVALCO: THE MOST COMPLETE RANGE OF PUMPS FOR DOMESTIC, AGRICULTURAL, INDUSTRIAL AND CIVIL USE AND A RELIABLE SOURCE OF PUMP AND MOTOR SERVICE: A GLOBAL, INNOVATIVE AND COMPETITIVE PUMPING AND MOTORS SOLUTION.Works, Pump and Motor Test Laboratory, Pumps and Electric Motors Research Centre. Exclusive High Tech Pumps for Water and Other Fluids, Motors and Controls, in Standard or Custom Designs.water is the future©VALCOPRODUCTSPRESENTATIONVALCO® International Trademark®The Company was founded by Valerio Costenaro in 1976 in Marostica in the high technology region of VENETO, (Venice Region, North-east Italy).The company has flourished by the design and manufacture of an expanding range of pumps, booster sets, motors and associated fittings for their installation, built-to-order and Custom made units with a worldwide distribution.Main Features and Advantages:• the most complete range of pumps and motors to cover most of your pumping and motors requirements: we study, design and manufacture the Solutions to your Pumping Problems• our pumps are made in Italy• prompt rapid deliveries• high technology, innovation and constant research: over 36 years longstanding experience with expertise over a century old• process and production cycles to ISO standards with major International, Regional and National Certifications with Conformity to EU Directives, Regulations and Recommendations• overdimensioned motors to handle voltage fluctuations; Single phase motors may be provided on request with overload motor protection, on 3 phase version the overload motor protection must be provided by the user and we can offer you our lines of control and protection panels (starters).• special sealing arrangements with superior quality • executions in cold pressed 304 or 316 stainless steel and cast iron, stainless steel and bronze castings for corrosion resistance and durability• Executions Flame-proof ATEX Directive 94/9/EC for equipment intended for use in potentially explosive atmospheres Eexd-IIB-T3-II-2-G. Low Voltage versions 42V AC following rules CENELEC HD 400.1 for use in installations with safety rules against electrocution.• pumps, motors and associated fittings meeting world standards and regulations and designed and made for high efficiency and lower power consumption to save and optimize water and energy and with a full line of pumps suitable for waters for human consumption• constant research by our PUMP & MOTOR RESEARCH CENTRE in the development of new and more advanced products. The research and development of pumping sets for customers individual requirements are carried out by our Special Pumps Division: specialty pumps built to customers’ requirements.• highly sophisticated electronic testing facilities – our Pump & Motor Test Laboratory – guarantee top quality: all units are tested before despatch – every process cycle and every finished product are tested against a number of performance parametres before being packed• high efficiency and consequently saving of energy due to low power consumption• a global strategy for the promptest delivery of spare parts in a competitive manner• service covering from enquiry to after-sale all throughout the pump life.High Value Quality Pumps and Motors. Our Quality is the result of more than 36 years Experience made of hard daily work, deep problem understanding with solutions implemented, thorough hard comformity tests for every production phase, strict field performance tests, hard durability tests, distructive tests, ISO conformity methods and full adherence to our strict tough Standards according to the innovative worldwide tested and fully reliable Valco Quality Method©.Service Back up and Spare Parts SupplyCommitted to the Customers since 1976 with Full Customer Service and Backup Support and rapid Supply of our Genuine Spares: organized in providing the Spare Parts even after 30 years operation and with a Worldwide Network of Service Centres with Specialists trained to Valco Standards. To help our Customers in handling with flexibility and fairness any maintenance and repair problems, Spare Parts are supplied to our Customers at special low prices. Partnership and Co-operationOur Company Growth from the very beginning into the future is based on building of Partnerships. We believe in Partnerships and Co-operation and this ensures us a stable sound constantly innovative Manufacturing and Distribution basis with highest degree of Reliability, utmost Flexibility and high and trustworthy Production Capacity with rapid Lead times to mutual Benefit. We control all phases of the Production Cycle: from Raw materials to finished products and after-sale Service with Maintenance, Repair and Supply of our genuine Spare Parts.We want to help our Customers to be Successful, by providing the Best Products and the Highest Service at Competitive Market Prices.Water and Energy ResourcesWe care for the Full Cycle of Water with the aim of Recovering the maximum amount possible through Renewable Energy Sources and VALCO is is deeply involved to contribute to a better future and we are active with our following Innovative Units:• Valco Environmental and Renewable Energy Sources Unit for Solutions developing and using Renewable Energy Sources aware and caring for Environmental Impact and Concern: Solar, Photovoltaic, Natural and Biomass Gases.• Valco Pumping Water Packages, Watermakers, Clean Water Safety Kits, Field Portable and Movable Units for Water Potabilization and Plants with Emergency Solutions for Water Provision also with Reverse Osmosis Systems, Techniques for Searching Underground Waters, Water Well Drilling, Water Treatment for Spunlace or Hydroentanglement and Geothermal techniques to explore and exploit Geothermal Fluid Resources for Thermal Resorts (Spas) and for Civil, Industrial, Agricultural and Heating. We also provide consultancy, know-how, service and techniques to find water sources©. • Valco Energy Plants for Energy production with Generating Sets, Alternators, Diesel and Gas Engines also using natural and biomass gases and Solutions for Residential, Industrial, Agricultural, Civil, Emergency and Civil Protection Uses, Solar and Photovoltaic Systems©. Water Turbines for the production of Green Energy. Where there is no electricity we provide Petrol and Diesel Motorpumps, DC Pumps, Generating Sets, Solar and Photovoltaic Systems.• Valco Air Conditioning and Air Refrigeration Components and Technologies©. • Valco pumps and motors training school©.VALCO WATER and ENERGY DIVISION:For the most efficent sustainable use of water and energy resources©.Always at your Service with exclusive specialised distribution network supporting the customers requirements.THE VALCO PROFILEwater is the future©We design and manufacture the most efficient, innovative and competitive pumping and motors solutions for you with flexibility and expertise, meeting your specific requirements with innovation and with trustworthy Care and Service from enquiry to installation all throughout the pump and motor life. OUR MANUFACTURING RANGES¦ SURFACE CENTRIFUGAL ELECTRIC PUMPS ¦ BOOSTER PRESSURIZATION SETS – PACKAGED PRESSURE UNITS and SYSTEMS¦ DRAINAGE AND WASTEWATER SEWAGE NO-CLOG SUBMERSIBLE ELECTRIC PUMPS¦ SUBMERSIBLE MULTISTAGE BOREHOLE ELECTRIC PUMPS FOR DEEP WELLS¦ FITTINGS a complete line of Fittings for Pumps and Pumping Systems¦ COMPONENTS and RAW MATERIALS for PUMPS and MOTORS ¦ ELECTRIC MOTORS OUR CUSTOMERS• Pumps specialized importers • Pumps distributors and Wholesalers• Pumps dealers • Well Drillers • Pumps installers (plumbers)• OEM Industrial Pumps End Users • Industrial Pumps Users• Pumps Users2 VALCO PROFILESURFACE CENTRIFUGAL ELECTRIC PUMPSIn-Line Stainless Steel 304 or 316 ConstructionTLC™, UTC™ and LSC™ - Circulating Pumps also with Variable Speed Control compliant with EuP directive and meeting the provisions of Regulation No 641/2009 of European Commission requiring a drastic reduction of energy consumption of circulators as from January 1st, 2013.Savings up to 80% less than traditional circulating pumps.Stainless Steel 304 or 316 Construction3” FlangedBronze Casting end suctionSingle Pipe 2” and Twin Pipe 4” Deep Well Ejector AssemblyStainless SteelPump constructionHorizontal and vertical, close-coupled, single and multistage, end suction, split case, in cast iron, stainless steel, brass, bronze and thermoplastics.ApplicationsDrinking potable water supply, domestic, civil, community and district water boosters, irrigation, heating, air conditioning, firefighting, sprinklers, food processing, industry, chemical, water treatment, sea water pumping.Innovations and Specialties • with Variable Speed Control with Inverters, (frequency control with modulation), for control and protection of the system, for low power consumption and energy saving according to EU energy saving rating recommendations Energy Standards Classes (to meet Kyoto Protocol recommendations), and for durability.• built with materials following EU Directive 98/83/CE referring to waters for human consumption.• with Flame-proof ATEX following Directive 94/9/EC for equipment intended for use in potentially explosive atmosphe res Eexd-IIB-T3-II-2-G and Low voltage versions for use in installations with safety rules against electrocution.• with pump assembly and motor made to customers’ requirements. Range of Performance:• Capacity (flow rate) up to 240 m3/h• Head up to 260 m • Powers: 0,37 ÷ 75 kWPUMP RANGES • Conva™ - Deep Well Jet Self Priming suitable for wells with low capacity.• Jetdom™ - Shallow Well Jet Self Priming.• Irrigua™ - Centrifugal Single and Two-Stage and to DIN-EN 733-DIN 24255 flanged DIN2533 (of back pull-out design for quick and simple dismantling and reassemblying for ease of Maintenance), also Bareshaft versions and Split Case.• Casalinga™ - Peripheral Turbine with multivane impeller generating high lifts with a small power consumption.• Casaself ™ - Self Priming Turbine Peripheral Electric Pumps.• Nordica™ & Buta™ - Multistage horizontal and vertical all stainless steel, high heads, silent operation.• Valco-Lem™ - Self priming contractors’ trash pumps in cast iron, bronze and stainless steel castings.• TLC™, UTC™ and LSC™ - Circulating Pumps also with Variable Speed Control compliant with EuP directive and meeting the provisions of Regulation No 641/2009 of European Commission requiring a drastic reduction of energy consumption of circulators as from January 1st, 2013. Savings up to 80% less than traditional circulating pumps.EFFICIENCY LEVELS FOR THREE PHASE MOTORS to IEC 60034-30 when applicable or required:IE1 = Standard EfficiencyIE2 = High Efficiency (comparable to USA EPACT 60Hz)IE3 = Premium Efficiency (comparable to USA “NEMA Premium 60Hz)Ecodesign EUP Directive 200532/EC and Commision Regulation EC 640/2009.Stainless SteelVersionVALCO SURFACE PUMPS 3 Conva™ • Deep well packerNordica™ • Multistage verticalButa™ • Multistage horizontalTLC™-UTC™-LSC™ • Circulating pumpsIrrigua™-2 • Centrifugal two-stage for high headsIrrigua™-3 • Centrifugal single stage for high capacities and low pressure irrigationValco-Lem™ • Self priming contractors trashInstallationCasalinga™ • Turbine peripheral booster Irrigua™-1 • Centrifugal single stage Irrigua™-1D • Centrifugal single stage DIN-EN standard cast ironand stainless steelJetdom™ • Shallow well jet self primingBareshaft DIN-EN Standard VersionCast Iron also bronze impellerwater is the future©end suctionside suctionend suction1 pump type 148J-SS, 24 litre tank with fixed membraneBooster constructionMade of 1, 2 or more service electric pumps also version with Jockey Pump , (centrifugal, jet, mulstistage horizontal and vertical), with controls either electric, electronic or with variable speed inverter (with frequency control with modulation: to make an “Intelligent Pump”) with high efficiency and lower power consumption and energy saving to meet EU Classes recommendations and according to Kyoto Protocol, with a wide range of settings, protections also with remote control. ApplicationsDrinking Potable water applications. Raising water for general use from varied sources: residential, civil, agricultural and industrial uses; providing sufficient water delivery to meet users’ demand and maintaining a sufficient minimum pressure in the system to ensure that the water reaches all points of demand: it enables the system to constantly adapt to your demands. Ideal to make up for insufficient pressure or shortages of water supply from the public water supplier or for water supply from varied sources (tanks, wells, etc.).They are widely used also in agricultural and industrial applications where variable capacities at a constant pressure are required.Innovations and SpecialtiesSpecial executions built with materials, (i.e. all stainless steel) following EU Directive 98/83/CE referring to waters for human consumption.BOOSTER PRESSURIZATION SETS -PACKAGED PRESSURE UNITS AND SYSTEMSPrej • predisposedsub-assembly withpump type 148JAwssj-pt • controlled by pressure switch andwith membrane tank1 pump type 139J, 8 litre tank 1 pump type 148J,24 litre tank1 pump type 148J with VALCOTANKONTROL (Electronic Pressure Control System) and 19 litre tankAwssjn-2vh • with 2 pumps and controlled by 2 VALCO V-Drive variable speed inverters and withspecial execution for water suitable for human consumption following EU directive 98/83/CEAwssj-2spt • with 2 pumps and controlled by electric panelstarter with pressure switchand with 2 units of 19 litre tankAwssj-2tch • with 2 pumps and controlled by 1 VALCO TC-Drive twin-electronic pump controller and with special execution for water suitable for human consumption followingEU directive 98/83/CEKIT-A2P • Stainless Steel Kit for easy and rapid assembly of 2 or more Pumps Booster Pressurization SetAwssnb-2sp • with 2 pumps and controlled by electric panel starter with pressure switchAwssn-2spth • with 2 pumps and controlled by electric panel starter with pressure switch and with 2 units of 19 litre tanks with special execution for water suitable for human consumption following EU directive 98/83/CE4 VALCO BOOSTERSwater is the future©We build on demand Special Booster Sets for the most efficient and effective handling of Water Resources, for lower Power Consumption and Energy Saving according to Kyoto Protocol also through the use of Alternative Energy Sources. Water Turbines for the production of Green Energy.Ranges of Performance:• Capacity (flow rate) up to 400 m3/h• Head up to 260 m • Powers from 0.37 ÷ 22 kWEFFICIENCY LEVELS FOR THREE PHASE MOTORS to IEC 60034-30 when applicable or required:IE1 = Standard Efficiency.IE2 = High Efficiency (comparable to USA EPACT 60Hz).IE3 = Premium Efficiency (comparable to USA “NEMA Premium 60Hz). Ecodesign EUP Directive 200532/EC and Commision Regulation EC 640/2009. Sets Controlled by:• Electric Panel Starter and Pressure Switch with Tank and 1 - 2 or more Pumps• TC Drive Twin-Electronic Pump Controller for 1 or 2 Pumps• Variable Speed Inverter V or T Drive with 1 - 2 or more PumpsPump Components for Submersible Borehole Electric PumpsVALCO SUBMERSIBLE BOREHOLE PUMPS 5 SUBMERSIBLE MULTISTAGE BOREHOLE ELECTRIC PUMPS FOR DEEP WELLS from 3 to 14-inch wells, to NEMA standard and complete with electric motors.Pipes and Fittingsfor Borehole WellsPump Components for Submersible Borehole Electric Pumps 3, 4 and 6” wellsPump Components for Submersible Borehole Electric Pumps from 6 to 24” wells• Vera™ - Submersible Multistage Borehole for deep wells.Pipes and Fittings forSubmersible Borehole Electric PumpsInstallationV-CASINGS4-inch wellSuction Support Bracket joining pump and motor to Floating versionRegenerativeValve Top Body to Floating versionImpellers, Diffusers and Stages to Floating versionPacking of VALCO Submersible Borehole Electric Pumps for 4” Wellsmax m3/h: 24max Hm: 338Floating Sand Resistant: reduces sand lockingValve Top Body to Mixed-flow version 8-inch wellMixed-flowRadialmax m3/h: 180max Hm: 53610-inch wellMixed-flowmax m3/h: 390max Hm: 260DWT 8-inch • Deep Well Vertical Shaft Turbine Pumps Deep Well Wet-ends Borehole Vertical Shaft Turbine Pumpsmax m3/h: 180max Hm: 276-inch wellStainless steel with float switch and cableStainless Steel versionStainless Steel versionStainless Steel versionfor tanks, float switch and cable, Stainless steelCooled by water flow, silent, multipurposemax m3/h: 66max Hm: 698Protection and con-trol panels (starters)supplied on requestmax m3/h: 2.7max Hm: 1283-inch wellalso with Inverter High SpeedView of Cast Iron Nickel plated Bracket 6” motorTermination kitSubmersible Motors4-inchrewindablerewindable4-inchFranklin6-inch6-inchFranklin Sand Fighter water cooled6-inchwater cooled rewindableMixed-flowwater is the future©The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications. Suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise.Pump and Motor constructionFrom 3 to 14 inch sizes to Nema standard and complete with 2-pole and 4-pole electric motors, rewindable, 2-wire , 3-wire with control box, oil cooled (prefilled with food grade additives to protect against freeze and rust) and wet type water-cooled executions. Protection IP68.Pump ends made of stainless steel, bronze, brass and cast iron.Impellers in stainless steel, cast iron, brass, bronze, noryl®, polycarbonate and technopolymers and thermoplastics, corrosion and abrasion resistant and non-toxic, radial and mixed-flow, brass multivane turbine. Heavy duty stainless steel or cast iron or bronze casting pump enclosure.Applications Suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. For domestic drinking potable water, industrial and agricultural and geothermal applications, to explore geothermal resources for fluids in spas, industry, agriculture and private, community and district heating and in all cases where it is requested to lift water out from below the ground from aquifers and to push it above with pressure: boreholes, bored wells, riverbanks, in-line pressure boosting, dewatering, sprinkler and drip irrigation,greenhouses and gardening, air conditioning, water supply to offshore oil platforms, booster pumping, fire fighting, fountains and water features, large rural irrigation schemes, turf watering installations and stock watering plants, dewatering of mines and excavations, level control (wellpoint) of groundwater waterbeds, sump drainage, artificial snow, solar power, etc.Water Well Drilling and Perforations. Techniques for Searching Underground Waters.We co-operate with Drillers and Well Operators for Well Examination.Built-in check valve to protect the pump against water hammer.Floating Version (F) Sand Resistant: reduces sand locking.Energy efficient hydraulic design for cost-effective operation. Easy to install and dismantle for service.Innovations and Specialties• On demand all wetted parts available with grade 304 or 316 stainless steel or bronze. • Executions for superior sand handling able to handle a tolerable quantity of sand. • On demand executions with protector against stray currents. • Also available Line-shaft turbine units. • DC motors versions available.Intelligent Control systems: Electric, Electronic Controls Panels also with Variable Speed Inverters. All pumps can be supplied with protection and control boxes (panel-starters). Delivery outlets from 1 to 8”.Energy Saving and EfficiencyWe optimize efficiencies for lower power consumption to suit your specific pumping requirements.Ranges of Performance:• Capacity (flow rate) up to 1300 m3/h • Head up to 800 m • Powers: 0.37 ÷ 400 kWRadialDrainage Submersible Portable Pumps madein Synthetic corrosion andabrasion-free materialPump constructionCast iron, Stainless steel, Bronze, no-clog, Portable, synthetic corrosion and abrasion-free material (thermoplastics), Automatic with float switch.Impellers: Open , vortex, single-channel, double-channel and three-channel and grinder cutter plate made of cast iron, stainless steel, aluminium, abrasion-resistant nitrilic rubber and technopolymers. Pump bodies made in cast iron, stainless steel, aluminium and technopolymers.ApplicationsSuitable for domestic, residential, industrial, agricultural and civil drainage and wastewater sewage uses: dewatering; sump drainage, effluent and sewage; ponds, construction, mines, reclamation, swimming pools, basements and floooded areas, stormwaters, irrigation, stock breeding, food beverage, for waste, sewage and washwater for single and several households and public buildings, for building sites also partially dry, for continuous and heavy duties for most types of fluids also with bodies in suspension in water treatment plants, brackish waters, dirty waters, sludge, industrial processes, etc.Innovations and SpecialtiesExecutions Flame-proof ATEX Directive 94/9/EC for equipment intended for use in potentially explosive atmospheres Eexd-IIB-T3-II-2-G.Low Voltage versions 42V AC following rules CENELEC HD 400.1 for use in installations with safety rules against electrocution.Intellingent Control Systems: Electric, Electronic Controls Panels also with Variable Speed Inverters, Sensors, Alarm Transmitters and Remote Monitoring.Executions for construction sites able to withstand limited dry running.• Dernajo™ - Drainage Submersible• Liqua™ - Sewage SubmersibleWe also supply Sewage Pumping Lifting Stations for lifting household waster water.Coupling Devices: Foot Pedestals and Adapters (outlet bends couplings, inlet bends intake suction curve), Gate Valves and Flange Ball Retaining Valves (Check Non return totally free passage with cover easily removable for plant inspection).Energy Saving and EfficiencyWe optimize efficiencies for lower power consumption to suit your specific pumping requirements.We provide full Technical Service, Spare Parts, Assistance and Aftersale Service and Maintenance through our Valco Distributors’ Network and our Valco Service Centres.Ranges of Performance:• Capacity (flow rate) up to 850 m3/h• Head up to 39 m • Powers: 0.37 ÷ 33 kW• Nominal Delivery Diametres up to DN200• Solids in suspension (free passage) max diametre 108 mm. Non-Clog.Dirty Waters Submersible Portable Pumpsmade in Synthetic corrosionand abrasion-free materialDirty Waters Submersible Portable Pumps made in Stainless steelDrainage and Sewage Vortex Impeller Submersible Pumps made in cast iron, no-cloggingVortex Fiberglass reinforced Nylon ImpellerOpen Stainless Steel Impeller Open Noryl Impeller Open Stainless Steel Impeller Open Noryl Impeller Open Stainless Steel Impeller Vortex Fiberglass reinforced Nylon ImpellerVortex Cast iron Impeller Drainage Submersible PortablePumps made in Stainless steelDrainage Submersible Heavy Duty Pumpswith open impeller made in Specialcorrosion-resistant Aluminium AlloyOpen Fiberglass reinforced Nylon ImpellerOpen Cast iron Impeller Open StainlessSteel Impeller Closed Noryl Impeller Drainage Submersible Portable Pumps Single and Multistage made in Synthetic corrosionand abrasion-free for Ponds and FountainsDRAINAGE AND WASTEWATER SEWAGE6 VALCO DRAINAGE & SEWAGE PUMPSmax m3/h: 42max Hm: 20max m3/h: 36max Hm: 15max m3/h: 36max Hm: 15max m3/h: 66max Hm: 18max m3/h: 15max Hm: 42max m3/h: 24max Hm: 16,5max m3/h: 36max Hm: 15max m3/h: 42max Hm: 20max m3/h: 42max Hm: 20water is the future©CBVSewage Wastewater Submersible Pumps Single, Double and three-channel Impellers heavy duty cast iron, bronze and stainless steel castings, non-cloggingDouble channel cast iron ImpellerThree channel cast iron Impeller Sewage Wastewater Submersible Pumps,Vortex Impellers heavy duty cast iron, bronze and stainless steel castings, non-cloggingDrainage Submersible heavy duty Dewatering Pumps, open nitrilecoated bronze impeller for effluents with some abrasive substancesVortex Cast iron Impeller Vortex Cast iron ImpellerVortex Cast iron ImpellerOpen bronze Impeller with special antiabrasive nitrile-rubber protectionBall check valves, no clogging for wastewaterup to DN600 (24”)Protections and control panels (star-ters) supplied on requestCoupling Devices - Foot Pedestals for Sewage Submersible Pumps also interchan-geable to replace major brandsCast iron Diffuser Stainless steel AISI 440 C Blade four-knives intake cutting system Open Cast iron Impeller Cutter Sewage Wasterwater Submersible Pumpswith open cutting impeller with diffusor andblade device for liquids containing fibres Heavy Duty Drainage Submersible Contractors’ Pumps, open cast iron impeller, stainless steel housing and 316 stainless steel motor cooling jacket for muddy and sandy waters, cooled by the liquid pumped, suitable to operate in hard conditions also not fully submerged. Delivery outlet up to 6”.Open 650 HB Chrome cast iron ImpellerPumping Lifting Stations, Coupling Devices and Ball Check ValvesVALCO DRAINAGE & SEWAGE PUMPS 7 DN 150DN 80DN 100 DN 50 DN 65 DN 65DN 200NO-CLOG SUBMERSIBLE ELECTRIC PUMPSmax m3/h: 850max Hm: 32max m3/h: 850max Hm: 32max m3/h: 850max Hm: 32max m3/h: 66max Hm: 18max m3/h: 24max Hm: 38max m3/h: 288max Hm: 60max m3/h: 180max Hm: 40max m3/h: 180max Hm: 40max m3/h: 180max Hm: 40max m3/h: 180max Hm: 40Installation schemeSingle channel cast iron Impellerwater is the future©Sewage Pumping Lifting Stations for lifting wastewater8 VALCO FITTINGSFloat switches and Level regulatorsVMSH-C VMS20-2Hmercury-free to RoHSdirective wastewaterfree suspension wastewater Drainage two-chamberVMS20-2HLStarters and panels electromechanical and electronic for protection of 1 or more Pumps, Direct, Star-Delta, Soft and Reactance Start, 1phase and 3phasewith overload protectionfor boosters and drainage3phasedry running check for borehole pumpsreactance start dry running check (Cosf)for borehole and submersible pumps for boosters and drainage pumpsfor wastewaterwith overload protectionInside viewInside viewInside view Inside viewInside viewInside viewFITTINGSwater is the future©VMS-CPCMFMSL VMS20-P2CALnew Controls for Booster Sets and PumpsT-DRIVE VALCONTROL VALCOTANKCONTROLV-DRIVEVALCONTROL-2Variable speed inverters Pumpcontroller for constant pressure: it eliminates cyclingwith temperature sensorPumpcontroller with water reserveInside viewTanks with replaceable membrane Tanks with fixed membranecorrosion-free and maintenance-freeARIES-F016-SSF2-SS CM60SC2 C8V60 C100 V100 VM VM60SC24stainless steel water hammer arrester2-litrestainless steelwater hammer arresterC24-SSC24-FSstainless steelSpare Butyl Rubber Membranessteel type with stainless steel flange corrosion-freeVALCONTROL-1vertical multiple function level regulators for narrow spaces, for dirty waters and special fluids, for tanks and cisterns, for minimum and wide variations of levels also for deep wellsInside viewFITTINGS a complete line of Fittings for Pumps and Pumping Systems to ensure fast installation and complete success.Level Control - Float Level Switches for drainage pumps applications, Fluid Level Regulators for wastewater pump stations mercury-free (no mercury) in conformity with EU RoHS directive (2002/95/EC). Stainless Steel Versions for high temperatures. Probes and Sensors for Level, Pressure, Temperature and Flow. Also available Flame-proof executions following ATEX Directive 94/9/EC for equipment intended for use in potentially explosive atmospheres. Pressure and Flow Control - Pressure Switches(Pressostats), Constant Pressure Valcontrols, Electronic Pumpcontrollers and Flow Regulators - it protects the pump from loss of prime and from dry running, eliminating cycling and keeping constant pressure and constant flow. Flow Metering Devices to measure the flow of water or fluid in a circuit. Pressure Gauges (Manometres).Electric and Electronic Control - Starters, Control Panels and Variable Speed Inverters, (frequency control with modulation), to control, protect and modulate the pumpset (for submersible borehole, drainage and sewage, surface and booster sets: to make an “Intelligent Pump”). Remote Control Devices.Hoses and Connectors - Flexible Hoses also in stainless steel corrrosion-proof. 3way and 5way brass connectors.PVC Steel suction Casings and Pipes with screens, well and raising heads, adapters, closing caps for Borehole and Conva Deep Well Pumps. Fittings for Polyethylene Pipes.Valves - Non return Check , Foot, Ball, Swing Check Valves, made of brass, bronze, stainless steel, cast iron, ecological, lead-free, multipurpose, free passage full flow to minimize friction losses and to maximize suction performance of pumps, no-clog, best for drinking water also in acetal resin and polypropylene with available sizes from ½” to 4”. Pressure Reducers and Pressure Stabilizers, Safety Valves, Surge and Pressure Diaphragm Relief Valves to reduce the excess pressure generated to avoid major damages to the equipment -designed to protect systems and persons from the dangers and damages of over pressure in water and heating pipe systems. Flanged Ball Retaining Valves for sewage wastewater pumps and systems. Special Valves for petrol and chemical Industry, off-shore installations and pipelines. High Pressure Valves, Globe Valves for harsh services, check non return Valves to prevent flow reversal in severe applications to ASME, API, DIN, ISO and other Standards. Filtres with Cartridges - In-Line Cartridge Water Filters with Cartridges. Impurity collecting Filters, Self-Cleaning Filters.Tanks with fixed membranes corrosion-free and maintenance-free. Also available stainless steel executions and special diaphragm membranes.Replaceable Membrane Vessels with Spare Membranes - Replaceable Membrane Vessel Accumulator Draw Off Tanks (diaphragm, bladder and accumulators tanks, reservoirs, deposits, liners, etc.) in coated steel and in stainless steel corrosion-proof and with high quality and long life resistant ecological butyl membrane(also with stainless steel flanges and in all stainless steel execution) suitable for Drinking Water for human consumption conforming to CE 0036 and requirements PED 97/23/CE, for electric pumps and booster sets. Filtration system tank for Reverse Osmosis. Expansion Tanks for sanitary hot water, for water heaters, for Central Heating and Solar Energy Systems. Vessels for Boilers, Heat Exchangers. Aries Stainless Steel Tanks to act as Water Hammer arrestors- Backflow Preventors and Back Flow Prevention Devices. Components and Parts for HVAC (Heating, Ventilation and Air Conditioning) - Manifold Connecting Kit for Heating Circuits. Preassembled Manifolds. Circulation Pump Kit with Thermostatic Valves and By-Pass. Hydronic Solutions.Joining Kits and Electric Cables - Joining Kit to join the electric cable. Electric supply cable for submersible and surface pumps.For all above products we supply executions suitable for waters for human consumption following EU Directive 98/83/CE.VALCO FITTINGS 9Accessories for boostersValco and Square-D Pressure Switches - VPS 3-5W VFHV50D V50DGV50B V50BG3way and 5way Brass Connectors Flexible Hoses steel, stainless steel corrosion-proofPressure Gauges with glycerine FCV2 FSG2Quick connections and hosesV-QUICKJOINT V-SPIRALInnovative quick hose connectionHose with steel wire reinforcementIn-line Cartdrige Water FiltresVFCIn-line cartridge water filtresSingle pipe 2” and twin pipe4” deep well ejector assemblySingle Pipe 2” and Twin Pipe 4” Deep Well Ejector AssemblyCable joining kit V-300JOINTHeat Shrink Cable Connection Kit to join the electric cablePlugs and electric cable VPCAC Domestic and Industrial Power Plugs and Electric Cable to world standardsPipes and Fittings for Borehole WellsPipes and Fittingsfor Borehole WellsV-CASINGSValves - Non Return Check, Foot, Ball and Safety Relief ValvesECO-FVAR-25 CFVCVSS CVHAGV VSGSGV IVYCBVECO-BV-BVSSEcological, multipur-pose to maximize suctionFull flow heavy duty brassFull flowStainless steelFull Bore brass and Stainless steel with Air inlet for drinking waterGatevalve Safetyrelief Inclined relief safety and pres-sure stabilizerY” filtre for liquidsBall check valves,no clogging forwastewater up to DN600 (24”)full bore brass and stainless steelCSV CNV FSVSpecial non return brassStandard brassFoot Valve brassFITTINGS water is the future©10 VALCO MOTORSEfficiency Levels for Three Phase Motors to IEC 60034-30IE1 = Standard EfficiencyIE2 = High Efficiency (comparable to USA EPACT 60Hz)IE3 = Premium Efficiency (comparable to USA “NEMA Premium 60Hz)Ecodesign EUP Directive 200532/EC and Commision Regulation EC 640/2009.Motor constructionAsynchronous Induction Compact AC Power in Standard or Custom Designs.Totally enclosed fan ventilated ranges for industrial applications.Single phase and three phase.Standards: Powers and Frames to IEC, IEC 60072-1, IEC 60034-7, IEC 60034-1, IEC 60034-5, EN 50347. With frame sizes from 56 to 400 with construction forms footmounted or flangemounted B3, B5, B14, B3/B5, B3/B14 and special executions on demand. From 2 to 8 pole and with double polarity and also with Variable Speed Inverter control (frequency control with modulation), soft-starters and controls. Stator frames and shields made of die-cast aluminium or cast iron; ball bearings with double screen, silent: they do not require maintenance; steel or stainless steel shafts. Degree of protection IP44, other degrees available on request. Insulation Class F or B and other classes available on request, in an ambient temperature not exceeding 40 DEG.C., and at an altitude not exceeding 1000 metres.VoltagesSingle Phase: 230 VThree Phase: 3 kW and below 230/400 V 4 kW and above 400/690 V Other voltages available on request.Cycles50 Hz Standard60 Hz available all throughout the range.Innovations and SpecialtiesWindings in Class F with copper wiring in class H2 with impregnation in Class H.Tropicalization on request. Flame-proof versions available – motors for hazardous areas - following Directive 94/9/EC ATEX for equipment intended for use in potentially explosive atmospheres Eexd (motors compatible with explosive athmosphere that are mixed or inflammable: air, gases and dust). Low Voltage executions for use in installations with safety rules against electrocution.DC motors and low voltage motors available on demand all throughout the ranges.AC and DC Brake Motors also available. Asynchronous and Synchronous Generators suitable for Hydropower, Marine and Industrial Applications.Mains and Inverter supply.Custom Built Special Solutions Special Executions available with special voltages, special shafts and special flanges.Important: we also supply motors components like Wound Stators and Rotor Shafts made to custom designs for customers individual requirements.• Frame Sizes from 56 to 500. • Powers from 0.17 to 560 kW. Single Phase 2 PoleThree Phase 4 PoleV-DiecastingMotor parts - Stators, Rotors and ShaftInnovative andPracticable Faston Type-ConnectionThree Phase 2 PoleSingle Phase 4 PoleF63-2M-33 F80-2T-100F80-2M-150F132S-4T-750F90L-4T-200F80-4T-75F71-4T-50F80-2T-150F80-4MC-75with custom made shaftFlange frame size 80 B14Flange frame size 100 B5Flange frame size 100 B5R reducedMotor Housings and Shieldsin Aluminium Diecast also made to Custom DesignsWindings and shaftsStator laminations in iron steel sheets or magnetic silicon sheets (packs) with rotor diecastWound stator with double or triple enamellingStator with winding and Rotor with ShaftShaft with Rotor balanced.Also special executionsMotor with fitted the inno-vative, practicable and safe faston type-connection on the terminal boxELECTRIC MOTORS - High Efficiency Motors,Energy-saving and with variable Speed controlswater is the future©VALCO COMPONENTS & RAW MATERIALS 11PUMPS and MOTORS COMPONENTS DIVISIONDesign - Design and Manufacturing of Carbide Dies, Moulds and Tools with production of magnetic sheets for electric motors: ability to meet customers’ requirements also following their own technical drawings up to the design of dies and the manufacturing of components. Robotics and Automatization through Mechatronics with new materials for sustainable Innovation: a combination of Mechanics, Electronics and Computing which assures Products and Systems much more reliable, efficient, economical and versatile and with Nanotechnologies to design new products manufactured for new functions and better technologies and with Commonization to provide high quality at lower costs.Casting, Pressing, Stamping, Forming and Forging - Cast iron, Bronze and Stainless Steel Castings. Aluminium Die-Castings, Metal cold Forming, Stamping, Blanking, Shearing and Pressing, Raw and Machined and made to order.Components for Electric MotorsWindings and Shafts - Also Wound Stators and Rotor Shafts made to custom designs for individual requirements.Components for PumpsTurned Components to Custom’s design in Stainless Steel, Brass, Cast Iron, Bronze, Plastics, etc.A complete range of components and spare parts for pumps and electric motors. We are able to identify and select the most suitable materials and technologies for the Customers’ individual requirements. Overhauls and Genuine Spare Parts.Lower Bellows Silicon Mechanical Seal (Rotating Ring) for pump type L1044VTGaskets,Seals, Washers and O-ringsClamping and Sealing Range, Cable Glands, Cable GlandsLower Silicon Mechanical Seal (Fixed Ring) for pump type DCH30TLower Tungsten Carbide Mechanical Seal (Rotating Ring) for pump type DC30PTLower Bellows Silicon Mechanical Seal (Rotating Ring) for pump type D20PATBellows Carbon Mechanical Seal (Rotating Ring) for pump type D8PAFLower Silicon Mechanical Seal (Fixed Ring) for pump type L1044VTTwin Face Bellows Silicon Mechanical Seal (Rotating Ring) for pump type DCH30TLower Tungsten Carbide Mechanical Seal (Fixed Ring) for pump type DC30PTLower Silicon Mechanical Seal (Fixed Ring) for pump type D20PATAlumina Mechanical Seal (Fixed Ring) for pump type D8PAFUpper Alumina Mechanical Seal (Fixed Ring) for pump type DCH30TPLASTIC RAW MATERIALS and COMPONENTS -DEVELOPMENT, DESIGN AND MANUFACTURING DIVISIONWe provide a complete service from Raw Materials to Designand Production. We are able to identify and select the mostsuitable materials and technologies for the Customers’individual requirements.Plastic Raw Materials - We supply following First Choice(Premier) Plastic Polymers:ABS, EP, HDPE, LDPE, LLDPE, MF, PA,PBT, PC, PET, PF, PMMA, POM, PP, PS, PSU, , PTFE, PUR, PVA, , PVC,UF, UP, PE, HIPS, PES,PA, PVDC, PU, PEEK, PEI. We supply Plastic reprocessed Granules with same properties as virgin Polymers, Biopolymers, Natural Polymers, Biodegradables, Compounds, Composites, Elastomers (Rubbers): Healthcare, Non-Toxic, Reclyclable plastic products thus contributing to the reduction of environmental pollution.All products can be delivered filled or unfilled.Innovative Materials for new products development with best application techniques: Nanocomposite Compounds. Nonwovens made of natural and synthetic fibres, Nonwoven Textiles, Geotextiles, Geosythetics, Spunbonded fabrics for soil stabilization, erosion control, drainage, environmental protection problems and to suit your particular applications.For all above products we supply executions suitable for potable drinking waters for human consumption to conform with DM174 following EU Directive 98/83/CE.COMPONENTS AND RAW MATERIALS FOR PUMPSAND MOTORS - Development, Design and Manufacturingwith Innovative Materials to increase Companies Competitiveness.Castings and Die-castingsSeals and Mechanical sealsHot-pressingTerminal blocks CapacitorsPressing and FormingStampingsPump components for submersible borehole pumpsStainless steel and Turned componentsBall bearings Plastics Cast Iron, Bronze, Stainless Steel , Aluminium, Stainless Steel Stampings: Pump Bodies, Brackets, Impellers, Diffusers, Shields, Flanges, , etc. Hot stamped brass Impellers for PumpsInnovative faston type terminal block for rapid and easy connectionLong Life Capacitors also custom made HFC high quality and wide rangeCold stamped components through die shearing: stainless steel pump bodies, impellers, diffusers, bushes, metal rings, seeger circlips, bearing springs, spring washers, elevation rings, adjusting rings, etc.Tie rods, self-locking nuts, plugs, high precision metal parts custom madeHigh performance deep grove rollers ball bearings with shields or seals watertight and prelubricated with grease. Specialties on demand.Noryl and other innovative plastic materials delivered filled or unfilled, for new products developments, with special compounds, na-nocomposites, nonwovens, geosynthetics, ecological, non toxic, biodegradagle. Special solutions to meet customers’ requirements.Stamped thermoplastics made in noryl and other innovative plastic materials: impellers, diffusers, venturi tubes and nozzles, disc holders, fly-wheels, fans, capacitor covers, terminal block covers, etc. also custom made. From 3 to 14” wellsIn standard execution and specially made to custom’s design to suit all fluids, pressures and temperatures.We care for environmental factorswater is the future©EFFICIENCY LEVELS FOR THREE PHASE MOTORS to IEC 60034-30 when applicable or required:IE1 = Standard EfficiencyIE2 = High Efficiency (comparable to USA EPACT 60Hz)IE3 = Premium Efficiency (comparable to USA “NEMA Premium 60Hz)Ecodesign EUP Directive 200532/EC and Commision Regulation EC 640/2009.VALCO srlVia dell’Industria, 27-29I-36063 MAROSTICA (Vicenza)Veneto, (Venice Region) - EU - ItalyPh.: +39-0424-77847Fax: +39-0424-475806E-Mail:valco@valco-costenaro.comHttp://www.valco.euwater is the future©VALCO® International trademark.Useful and valuable products for progress, prosperity and peace©Head Office, Works, Pump & Motor Test Laboratory Pumps and Electric Motors Research Centre. NATIONAL, REGIONAL AND INTERNATIONAL STANDARDSElectric Motors to IEC, IEC 60072-1, IEC 60034-7, IEC 60034-1, IEC 60034-5, EN 50347 Standards.National Standard Organizations: DIN, BSI, ANSI, NIST, JISC, UNI, GOST-R, SAC, SAI, AENOR, SIS, KATS, DGN, PKN, SASO, SABS, TSE, TCVN, etc.Low Voltage versions 42V AC following rules CENELEC HD 400.1 for use in installations with safety rules against electrocution. Most international standards.Kindly contact us for confirmation and certifications and approvals details.EU DIRECTIVESEU Directive 98/83/CE suitable to waters for human consumption executions, RoHS-2002-2002/95/EC Directive, Low Voltage Directive 2006/95/CE, Machines Directive 98/037/EEC, Electromagnetic Compatibility Directive 89/336/EEC, Executions Flame-proof ATEX Directive 94/9/EC for equipment intended for use in potentially explosive atmospheres Eexd-IIB-T3-II-2-G. CERTIFICATIONS and APPROVALSAll major International and National Certifications and Approvals are obtainable on our products through Certifying Bodies and Authorities like UL, NSF, CSA, IMQ, TÜV, ETL, SGS, QSA, ASME, API, WRc, NSF, IAPMO, TTK CE, SEMKO, PSE, GOST-R, UL, CSA, WIMES 3.03 with Certifications and Approvals: BSI, TUV4807, TUV20013, TUV20014, TUV20016, TUV20020, TUVCE0036, Crecep, DVGW, IAPMO, WRAS20014, WRAS20015, WRAS20016, WRAS20018, WRAS20020, DIN 531, DIN 537, DIN 541, DIN P 637, VQM, etc.Kindly contact us for confirmation and certifications and approvals details.STANDARDS, EU DIRECTIVES,REGULATIONS AND RECOMMENDATIONSVALCO worldwide quality and warranty MADE IN ITALY by VALCOsince 1976Pumps, Motors and Controls Manufacturingwater is the future©Useful and Valuable Products for Progress, Prosperity and Peace©TESTED &CERTIFIEDRef. VLF-Jan2013 Valco Products PresentationDistributed by:Trademark VALCO is a registered trademark of VALCO srl.Trademarks Conva, Jetdom, Irrigua, Casalinga, Vera, Dernajo, Prima, Liqua are registered trademarks of Valco srl. Noryl® and General Electric® are registered trademarks and exclusive property of General Electric Company (GE).Costenaro Valerio ® is a registered trademark of Valerio Costenaro. All trademarks and registered trademarks are the property of their respective owners. Other company, product, and service names may be trademarks or service marks of others.Features subject to change – not contractually valid unless specifically authorized by VALCO.Copyright © 1976-2013 by VALCO srl. All rights reserved. Reproduction even partial not permitted.PUMPS AND MOTORS TO LAST AND TROUBLE-FREEWe want to help our Customers to be Successful, by providing the Best Products and the Highest Service at Competitive Market Prices.We Solve Pumping Problems, also the most difficult ones, Designing and Building for you the most Reliable, Efficient and Competitive Pumping Solutions. Contact us for your Pumping Problems We provide full Technical Service, Spare Parts, Assistance and Aftersale Service and Maintenance through our Valco Distributors’ Network and our Valco Service Centres.We provide Testings, Conformity and Inspection Certficates through our Valco modern Testing Laboratory and through major Approved Service and University Testing Laboratories: RTM Breda, CMC, CREI-VEN, NANOFAB, CIVEN, ECSIN, PARCO VEGA; Universities: Università degli Studi of Padua, Università Ca’ Foscari of Venice, Università degli Studi of Verona, etc.60 Hz available all throughout the range: please apply.