Wedging Titeseal Gate Brochure

Heavy Duty Titeseal™ Gates Wedging Titeseal™ Gates Slide Gates Flap GatesWeir Gates Stop Logs Stop Gates Flow Control Products Over 40 years of excellence in engineering and fabricating composite flow control products. Wedging Titeseal® Plasti-Fab Titeseal Gate® • Best Available Technology for Leakage Control • Ideal for Emergency Shut-Off • Engineered for Open Channel Applications • 4 to 5 Times Lower Leakage than AWWA C-563 • Adjustable Seals Mounted on Gate Allows for Adjustment Without De-Watering • Guide Includes an Integral Wedge Design • Patented Design Provides for Maximum Fluid Control • Designed, Engineered, and Built to Exceed AWWA C-563 • Designed for Heads Up to 100 Feet • High Corrosion Resistance, Low Maintenance • Cast-in Wall Thimbles are Not Required • Seals Mounted on Gate Allow for Inspection and Replacement Without De-Watering • Guide Includes a Top Closure Bar that Allows the Gate to Seal Around All Four Sides • The Wedging Bar and Adjustable Wedging Bolts Allow the Leakage Rate to be Adjusted to the Lowest Possible Levels Heavy Duty Titeseal® Plasti-Fab Gate Construction Plasti-Fab Gate Seals Are Easily Adjusted and Replaced Generally for Head Pressures Up to 100 Feet Heavy Duty Gates Light Duty GatesCopolymer Reinforcement Steel Tube Reinforcement Foam or Recycled FRP Material Core Encapsulated in Composite FRP Seamless Composite FRP Corrosion Barrier Generally for Head Pressures Up to 10 Feet HDTS Gates Plasti-Fab Steel Core Gates are completely encapsulated with a corrosion-resistant composite barrier. Flap, Stop, Slide, & Weir Gates Flap Gates Stop Gates Slide Gates Weir Gates For over forty years, Plasti-Fab has been supplying composite fiberglass reinforced plastic (FRP) fluid control gates for highly corrosive water environments. All Plasti-Fab Gates totally encapsulate the internal reinforcing structure. All composite gates offer high corrosion resistance, low maintenance, and no need for wall thimbles due their reduced weight characteristics. In addition, they are non-conductive, non-magnetic, and non-binding. Composite FRP material is pound-for-pound much stronger than steel. Plasti-Fab composite equipment is warranted against failure due to corrosion for 25 years. The Plasti-Fab composite Flap Gates provide low leakage, low maintenance, and low head loss. They are designed and engineered for maximum effectiveness in corrosive environments. Available in round, square, or rectangular styles, they may be fabricated from flexible Neoprene or rigid Composite FRP. Molded reinforced composite flap gates are lightweight. Most gates utilize a sandwich construction with a closed-cell polyisocyanurate foam core for high strength and corrosion resistance. High-strength sandwich construction. Various handle configurations available. Internally reinforced to withstand maximum operating head. Flush bottom seals Internal stainless steel mounting plate welded to core and completely encapsulated. The Plasti-Fab composite FRP Weir Gates are ideal for controlling upstream channel depth and regulating discharge rates. They are designed and engineered for maximum corrosion resistance in hostile environments. Plasti-Fab Weir Gates allow for consolidation of traditional Weir Plate and Slide Gate combinations at the basin entrance.Downward opening Weir Gate The Plasti-Fab Legacy Plasti-Fab is a world class manufacturer of composites with over 40 years of experience designing, engineering, and building products for fluid control and management. Plasti-Fab products are fabricated from highly corrosion resistant composite fiberglass reinforced plastic (FRP). Recognized around the world as an experienced innovator and provider of quality composite solutions, Plasti-Fab has a wealth of experience and expertise in flow control products. Visit us online at: www.plasti-fab.com Lifting options include manually operated hand wheels with various geared ratio options and electronic motor operators for remote fluid control. PLASTI-FAB Inc. PO Box 100 Tualatin, Oregon 97062-0100 (503)692-5460 Fax:(503)692-1145 www.Plasti-Fab.com Contact Your Local Plasti-Fab Representative Plasti-Fab Stop Logs are fabricated using “green” vacuum infusion technology that allows the outer surface to be made in one piece. This means that there are no seams, cracks, or ridges from glued parts that can allow seepage to penetrate the interior support structure causing the log to fail. Broc. No FC-2.09.09 - Copyright© - 2009 Plasti-Fab Inc. - Plasti-Fab® is a trademark of Plasti-Fab Inc. Composite FRP Stop Logs Heavy Duty Stop Logs • Maximum leakage of less than 0.02 GPM per wetted foot when installed in Plasti-Fab Guide Frames. • Engineered for new or existing guide structures. • Dual Neoprene seals on logs. • Two-point seals on Guide Frames. • Stop Log sets available with varying log heights. • Theft concerns eliminated with no recycle market value. • Available with auto latching lift beams and storage racks. Unlike water control products made of wood or metal, composite FRP Stop Logs will not decay, putrefy, crumble, rust, flake, or corrode. FRP logs virtually last forever providing peace of mind to operators, engineers, and owners who are responsible for selecting the right equipment. 25-Year Guarantee Against Failure From Corrosion. 1-1/2” Diameter Stainless Steel Lifting Pins Extend Through the Log Dual Neoprene Seals Type of Gate Common Size Range Normal Head Available as Down-Opening Weir Gate Max. Expected Leakage Rate Gallons per min.* Guide Frame Materials Seating Unseating Seating Head Unseating Head Heavy Duty Titeseal Sluice Gates 12” x 12” to 144” x 144” 30 to 60 varies size 20 to 40 varies with size Yes 0.1 0.1 FRP & Stainless Steel Wedging Titeseal Slide Gates 12” x 12” to 72” x 72” To Top of Gate To Top of Gate No .027 .027 FRP & Stainless Steel FRP Slide Gates 12” x 12” to 72” x 72” To Top of Gate To Top of Gate Yes 0.1 0.2 FRP & Stainless Steel FRP Stop Gates 12” x 12” to 72” x 72” To Top of Gate To Top of Gate No 0.1 0.2 FRP & Stainless Steel Rigid Round Flap Gates 4” to 96” 20 - 30 NA NA 0.1 NA NA Rectangular Flap Gates 12” to 96” 20 - 30 NA NA 0.1 NA NA Flexible Flap Gates 12” to 96” 20 - 30 NA NA 0.1 NA NA FRP Stop Logs 2” to 20” Top of Gate Top of Gate No .02 .02 FRP & Stainless Steel R ef er en c e G u id e *Per wetted foot of perimeter