Wet Chemistry - Pre-measured Reagent Tubes Brochure

Wet Chemistry NEW Pre-measured Reagent TubesTry convenient Snip & PourTM Concentrates.Pre–measured Snip & Pour reagent tubes for Ammonia and Cyanide Distillations deliver the precise volume of reagent to each sample.Copyright Environmental Express, Inc., PSWCSnipDist13.07 E N V I R O N M E N T A L E X P R E S SCall 800.343.5319 or 843.881.6560 • www.environmentalexpress.comOrder Snip & Pour Reagents today to simplify Ammonia and Cyanide Distillations in your laboratorySnip & Pour Concentrates are packaged in convenient PFA tubes.Reagent addition is a snap with Snip & Pour reagent tubes from Environmental Express. Just snip the corner of the PFA tube and pour the contents directly into the collection trap (SimpleDistTM) or receiver tube (MicroBlockTM). Economical, easy-to-use tubes:• Can be brought to different volumes• Eliminate measuring and pipetting• Increase accuracy• Improve quality control and final results• Meet DOT requirements Each pre-measured PFA tube for SimpleDist delivers 5mL of reagent.Concentration Catalog # Volume/Pack Size0.2N H2SO4 C7005 5mL/501.25N NaOH C7115 5mL/5020g/L Boric Acid C7125 5mL/50Directions for Use with SimpleDist:1. Pour the entire 5mL concentrate into the SimpleDist collection trap.2. Using a squirt bottle (or equivalent) add DI Water to the trap to bring the volume up to approximately 22 – 23 mL. This will leave enough room in the trap for any water vapor intrusion that may happen in the distillation process.3. Distill per the instructions for the method you are using.4. Disconnect the trap from the apparatus and bring up to the 25mL mark using DI Water.Each pre-measured PFA Tube for MicroBlock delivers 10mL of reagent. Concentration Catalog # Volume/Pack Size0.2N H2SO4 C7010 10mL/501.25N NaOH C7110 10mL/5020g/L Boric Acid C7120 10mL/50Directions for Use with MicroBlock:1. Pour the entire 10mL concentrate into the receiver tube.2. If distilling for CN bring up to a 50mL volume using DI Water.3. Distill per instructions for the method you are using.4. Disconnect the apparatus and do any volume adjustments that are necessary to bring the final distillate to 50mL.Contact your Technical Sales Representative for more informationPour the entire 5mL concentrate into the SimpleDist collection trap.