XC Series, Inline - Brochure

The XC Series in-line fluoropolymer heat exchangeris designed for the most demanding chemical heatingor cooling applications. Typical industries served in-clude semiconductor, FPD, MEMS, and biomedical.SPECIFICATIONS:Service: In-line chemical heat exchanger with allfluoropolymer wetted surfaces (tubing side) forvirtually any wet chemistry application.Sizes:• 1.5 ft2 (.14m2) of exchange area• 2.5 ft2 (.23m2) of exchange area• 3.5 ft2 (.33m2) of exchange areaStandard Features:• ½-inch (12mm) heavy wall PFA tubing, .030”(.76mm) thick• All welded construction (shell)• 4½-inch (114mm) diameter polypropylene shell• Internally baffled for enhanced heatexchanger performance• “U” factor (depending on flow rate): 25-50BTU/(hr x ft2 x °F) = 142-284 J/(s x m2 x °C)• Shell-side drain connectionFluid Connections:• Fluid (tube): ½-inch (12mm) male flare PFA• Shell: ¾-inch (19mm) male flare PFA• Shell drain: ¼-inch (6mm) male flare PFAMaximum Pressure/Temperature:• Tube (PFA): 35 PSIG (241 kPa) at 120ºC (250ºF)• Shell (PP): 30 PSIG (207 kPa) at 82ºC (180ºF)• Optional shell (PVDF): 30 PSIG (206 kPa) at135ºC (275ºF)Warranty: One yearOptions:• ¼-inch (6.4mm) to ¾-inch (19mm) Super Pillar300 Type® connections• Custom sizes based on application• PVDF shellFEATURES AND BENEFITS:• Exceptionally clean performance:Cleanroom assembled and tested to ensurethe highest manufacturing standards.• Leak free operation: Integral inlet/outlet forsingle point fluid connections simplifies instal-lation and greatly reduces the potential forchemical leaks.• Outstanding performance: Heavy wall, largediameter tubing improves circulation andminimizes pressure drop.• Compact size: Less surface area requiredfor same BTU exchange compared to mostother fluoropolymer exchangers.• Rugged construction: Thick wall, welded con-struction provides extremely long service life.• Outstanding chemical compatibility: Alltube-side parts are fluoropolymer andcompatible with most chemistries for virtuallyunlimited process options. Shell is availablein polypropylene (standard) or PVDFconstruction.XC in-line heat exchanger (cutaway for illustrative purposes)Note: Vacuum breakers are recommended for steam heating applications. Please consult factory forreduced pressure steam applications. Pulsation dampeners recommended.7010 Lindsay Dr. • Mentor, OH 44060 U.S.A. • Phone: (1)440-974-1300 • Fax: (1)440-974-9561www.process-technology.com • Email: info@process-technology.comSuper 300 Type Pillar® is a registered trademark of Nippon Pillar Packing Co. LTD.XC Cutaway.61” (15mm)Ø4.5” (114mm)1.54” (39 mm)1.56”(40mm).57”(14mm)ASHELL OUTLETTUBE SIDEOUTLETTUBE SIDEINLETSHELL INLETSHELL OUTLETHEAT EXCHANGERCOILHEAT EXCHANGERSHELLSHELLDRAIN0102030405060700.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0Flow Rate (lpm)Pressure Drop (psi)0651301952603253904550 1 2 3 4 5 6 7 8 9 10 11Flow Rate (gpm)Pressure Drop (kpa)XCP3.5XCP2.5XCP1.5SIZE "A" in./(mm)1.5 ft2 10.0 (254)2.5 ft2 14.0 (356)3.5 ft2 18.5 (470)Tube Pressure DropSHELL INLET