Zebra - Economy Mixer Brochure

P R O D U C T P R O F I L E• 14 metering tips for specific ratios (see below)• Maximum viscosity of 500 SUS• 4.8 gpm (18 lpm) flow rate• 48” intake tube w/check valve included• 48” discharge tube included, max length (for longer delivery needs, please refer to the proportioning pump series)• Required pressure of 25psi (75psi max)• Fits easily on 55 gallon barrels• 30 day warranty onlyModel Part Number DescriptionEconomy Mixer MIX05120 Zebra Economy MixerAccessory MIXXWL.1 Water Limiter, 15-150 adjustable PSI rangeZebra Skimmers CorporationPO Box 833 Chagrin Falls, OH 44022www.ZebraSkimmers.comwww.CoolantMaintenance.comToll Free 888-249-4855Phone: 440.349.0141Fax: 440.349.1211© February 2008 Zebra Skimmers Corp. All rights reserved.Contact your distributorfor more informationZebra Economy Mixer®Metering tips included for ratios at right, (tested @ 40 psi with water-thin viscosity)Ratio4.5 : 15 : 16 : 19 : 120 : 124 : 126 : 131 : 150 : 170 : 190 : 1100 : 1200 : 1400 : 1How It WorksVenturi pumps are commonly used for coolant mixers. The moving water across the coolant orifice creates a low pressure zone drawing coolant into the water stream. The combination of the two laminar flows creates a strong turbulent zone in which the two fluids are thoroughly mixed. Since there are no moving parts, the pump has a very high degree of reliability. The needle valve (machinist mixer only) allows for a high degree of precision for setting the proportion of coolant mixed in with the water.Needle valveWater inCoolant concentrate inTurbulent area where mixing occursPerfectly mixed coolantWater Limiter (#MIXXWL.1)Conc. % 22.2% 20.0 16.6 11.1 5.0 4.16 3.84 3.23 2.0 1.43 1.11 1.0 .50 .25