Zebra - Machinist Mixer Brochure

P R O D U C T P R O F I L EMixer Lockout#MIXXLockZebra Skimmers CorporationPO Box 833 Chagrin Falls, OH 44022www.ZebraSkimmers.comwww.CoolantMaintenance.comToll Free 888-249-4855Phone: 440.349.0141Fax: 440.349.1211©May2010 Zebra Skimmers Corp. All rights reserved.Contact your distributorfor more informationZebra Machinist Mixers®Water Limiter (#MIXXWL.1)Mixers with Lifetime WarrantyMixing RatiosModel Part Number GPM Mix Range % Low High ApplicationMachinist Mixer MIX0327 3 0-7 100:1 15:1 55 gal barrelMIXU0327 3 0-7 100:1 15:1 Pail, barrel, toteMIX03725 3 0-25 100:1 4:1 55 gal barrelMIXU03725 3 0-25 100:1 4:1 Pail, barrel, toteMIX1027 10 0-7 100:1 15:1 55 gal barrelMIXU1027 10 0-7 100:1 15:1 Pail, barrel, toteMIX10725 10 0-25 100:1 4:1 55 gal barrelMIXU10725 10 0-25 100:1 4:1 Pail, barrel, toteMachinist Mixers MIX03725SS 3 0-25 100:1 4:1 55 gal barrelfor caustic concentrates MIXU03725SS 3 0-25 100:1 4:1 Pail, barrel, toteMIX10725SS 10 0-25 100:1 4:1 55 gal barrelMIXU10725SS 10 0-25 100:1 4:1 Pail, barrel, toteAccessories MIXXWL.1 Water Limiter, 15-150 adjustable PSI rangeMIXXLOCK Lockout for Machinist Mixer to prevent tamperingMIXSF3 Swivel Fitting for inlet garden hose for 3gpm machinist's mixerMIXSF10 Swivel Fitting for inlet garden hose for 10gpm machinist's mixerHow It WorksVenturi pumps are commonly used for coolant mixers. The moving water across the coolant orifice creates a low pressure zone drawing coolant into the water stream. The combination of the two laminar flows creates a strong turbulent zone in which the two fluids are thoroughly mixed. Since there are no moving parts, the pump has a very high degree of reliability. The needle valve allows for a high degree of precision for setting the proportion of coolant mixed in with the water.• Separate water shut-off valve• Machined from solid bronze casting with galvanized steel standpipe• Stainless steel models available for caustic concentrates• Maximum viscosity of 500 SUS• 40” discharge tube included, max length delivery (for longer delivery needs, please refer to the proportioning pump series)• Minimum 25psi needed (75psi max)• Recommended Accessory: Lockout for tampering prevention (#MIXXLOCK)3 POINT ACCURACY USING FORCE-FLO™ TECHNOLOGY• Machined needle valve• Locknut below dial holds mixing reference• Standpipe check valve keeps mixing chamber loaded