ZERMA - Model serie GSL 200 - Slow Speed Granulators - Brochure

9GSCPMGS GSHGSPGSEGSLZSSlow-speed GranulatorsOptions GSL 180 and GSL 300 RangeThe granulators of the GSL range can be equipped with numerous options for the most varied of intended applicationsHigh model, mobile bin GSL 300/400, high model High model, sack-fillThe Home of Size ReductionSubject to technical modification 09/2010, V 1.0ZERMA Recycling & Granulator TechnologyAccessoriesULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGYZERMA, with more than 60 years of experience, is one of the leading manufacturers of high quality granulators. Our product range begins with the small slow, speed granulators and reaches the large high performance granulators, including special machines such as the front entry granulators for pipes and profiles or the pulveriser systems for fine grinding applications. Using drive motors ranging from 2,2 kW to 200 kW, the ZERMA line of machines covers the complete spectrum of plastics size reduction applications.www.amis-gmbh.deAMIS Maschinen-Vertriebs GmbHIm Rohrbusch 15 74939 Zuzenhausen · Germany: +49 (0) 6226 7890-0Fax: +49 (0) 6226 7890-222info@amis-gmbh.dePhone2 7 8GSL 180/120 - GSL 180/430 Range Technical Data GSL 200 RangeTechnical Data GSL 180 RangeThe slow-speed granulators in the ZERMA GSL range from 180/120 to 180/430 have been specially developed as show-running grinders for applications in the injection-moulding sector. The material to be granulated is fed via a sound-absorbing feed hopper that is available in a range of variants to suit the application. The slow-speed granulators of this range are mounted on either low or high level baseframes, depending on application, and with suction trough/bag fill chute to suit. With these numerous options, the slow speed granulators can be tailored to an extremely wide range of applications. In addition to the advantages common to all slow-running grinders such as low noise characteristics and near dust-free product, GSL 180/120 to GSL 180/430 stand out due to their special knife, rotor, 'quick-snap' opening and good accessibility features.GSL 180/120Rotor-Ø: 180 mmGrinding chamber:270 x 120 mmGSL 180/180Rotor-Ø: 180 mmGrinding chamber:270 x 180 mmGSL 180/300Rotor-Ø: 180 mmGrinding chamber:270 x 300 mmGSL 180/430Rotor-Ø: 180 mmGrinding chamber:270 x 430 mmType GSL 180/120 180/180 180/300 180/430Rotor speed rotor (rpm) 150 150 150 150Number of rotor knives 12 18 30 45Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 180 180 180 180Width of the rotor (mm) 120 180 300 430Feed opening (mm) 350 x 350 350 x 350 350 x 350 430 x 270Opening cutting chamber (mm x mm) 270 x 120 270 x 180 270 x 300 270 x 430Drive capacity (kW) 2,2 3,0 4,0 4,0Weight approx. (kg) 120 130 150 170Dimensiones:low executionWidth A (mm) 420 420 420 420Length B (mm) 850 910 1030 1160Height C (mm) 450 450 450 450Height D (mm) 600 600 600 900Type GSL 200/180 200/270 200/360 200/500Rotor speed (rpm) 150 150 152 152Number of rotor knives 12 18 24 33Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 200 200 200 200Width of the rotor (mm) 180 270 360 495Feed opening (mm) 240 x 240 240 x 310 460 x 310 460 x 310Opening cutting chamber (mm x mm) 250 x 190 250 x 280 250 x 370 250 x 505Drive capacity (kW) 3 3 4 4Weight approx. (kg) 175 205 235 270Dimensions:low executionWidth A (mm) 800 900 1080 1220Length B (mm) 510 510 510 510Height C (mm) 515 515 515 515Height D (mm) 670 670 700 760ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGY6 3The granulators of the GSL 300/400 - GSL 300/800 range are primarily intended for grinding scrap mouldings and sprues from the injection and blow moulding sector. In addition to all the important advantages and features described for the GSL 180 range, the GSL 300/400 - GSL 300/800 slow run-ning machines are especially suitable for larger mouldings such as car door liners, bumpers or hollow bodied parts. Technica Data GSL 300 Range GSL 300/400 - GSL 300/800 RangeGSL 300/400Rotor-Ø: 300 mmGrinding chamber:400 x 400 mmThe V shaped arrangement of the staggered rotor blades holds pre-cut material in the center of the cutting chamber. This prevents material sticking to the side walls and considerably reduces wear on the grinding chamber walls when processing fibre and glass reinforced plastics. The staggered rotor blades creates an individual blade cut thus increasing the cutting torque. GSL 300/600Rotor-Ø: 300 mmGrinding chamber:600 x 400 mmGSL 300/800Rotor-Ø: 300 mmGrinding chamber:800 x 400 mmDCB AType GSL 300/400 300/600 300/800Rotor speed (rpm) 150 150 150Number of rotor knives 33 48 66Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 300 300 300Width of the rotor (mm) 400 600 800Feed opening (mm) 400 x 400 600 x 400 800 x 400Opening cutting chamber (mm x mm) 400 x 400 600 x 400 800 x 400Drive capacity (kW) 7,5 - 11 11 18,5Weight approx. (kg) 550 890 980Dimensions:low executionWidth A (mm) 820 1100 1410Length B (mm) 1050 1010 1070Height C (mm) 690 710 700Height D (mm) 990 920 1050ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGY4 5GSL 200/180 - 200/500 Range DetailsNewly designed more aggresive infeedThe rotor and cutting chamber of the GSL 200 series have be re-designed, creating a more aggressive in-feed for hollow parts, such as bottles or other blow moulded parts. The increased cutting chamber dimensions make feeding of larger runners possible, thus making the GSL 200 series a very versatile machine.Improved easy accessibilityThe already easy, comfortable and tool-less accessibility of the GSL series has been improved even more. Changes to the suction trough and screen holder make maintenance work easier and faster.Integrated sealing helps keeping the working area clean and dust-free.Special Knives make adjustment work unnecessary The rotor is equipped with special knives. The curvature of the specially profiled rotor knives ensures a constant cutting radius after re-sharpening thus maintaining the original cutting gap. Awkward knife adjustment is no longer necessary. Downtime for knife changes is therefore reduced. The GSL stator knives can be rotated 4 times and can also be re-sharpened. Heavy Duty Rotor Design The rotor shaft has bearings at each end and the shaft diameter is designed for the largest rotor width to enable use of a modular assembly across the width range. The staggered rotor blades creates an individual blade cut thus increasing the cutting torque. All of the machines in this series are therefore suitable for grinding more solid materials and thicker walled sprues. Quick Snap System The ZERMA Quick Snap System allows the lower front plate section to be easily removed for granulator cleaning. The lower front plate section is held in position by two sturdy lever clamps. An electrical limit switch prevents the operation of the machine when this lower front plate is removed. The rotor outboard bearing is mounted in the fixed upper side chamber section. Good accessibility The granulators can be safety opened in just a few steps and without the use of tools. The feed hopper is hinged and can be tilted back. After removing the lower front plate section and the suction trough, the machine becomes easily accessible ready for quick cleaning in the event of colour or material change. ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGY4 5GSL 200/180 - 200/500 Range DetailsNewly designed more aggresive infeedThe rotor and cutting chamber of the GSL 200 series have be re-designed, creating a more aggressive in-feed for hollow parts, such as bottles or other blow moulded parts. The increased cutting chamber dimensions make feeding of larger runners possible, thus making the GSL 200 series a very versatile machine.Improved easy accessibilityThe already easy, comfortable and tool-less accessibility of the GSL series has been improved even more. Changes to the suction trough and screen holder make maintenance work easier and faster.Integrated sealing helps keeping the working area clean and dust-free.Special Knives make adjustment work unnecessary The rotor is equipped with special knives. The curvature of the specially profiled rotor knives ensures a constant cutting radius after re-sharpening thus maintaining the original cutting gap. Awkward knife adjustment is no longer necessary. Downtime for knife changes is therefore reduced. The GSL stator knives can be rotated 4 times and can also be re-sharpened. Heavy Duty Rotor Design The rotor shaft has bearings at each end and the shaft diameter is designed for the largest rotor width to enable use of a modular assembly across the width range. The staggered rotor blades creates an individual blade cut thus increasing the cutting torque. All of the machines in this series are therefore suitable for grinding more solid materials and thicker walled sprues. Quick Snap System The ZERMA Quick Snap System allows the lower front plate section to be easily removed for granulator cleaning. The lower front plate section is held in position by two sturdy lever clamps. An electrical limit switch prevents the operation of the machine when this lower front plate is removed. The rotor outboard bearing is mounted in the fixed upper side chamber section. Good accessibility The granulators can be safety opened in just a few steps and without the use of tools. The feed hopper is hinged and can be tilted back. After removing the lower front plate section and the suction trough, the machine becomes easily accessible ready for quick cleaning in the event of colour or material change. ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGY6 3The granulators of the GSL 300/400 - GSL 300/800 range are primarily intended for grinding scrap mouldings and sprues from the injection and blow moulding sector. In addition to all the important advantages and features described for the GSL 180 range, the GSL 300/400 - GSL 300/800 slow run-ning machines are especially suitable for larger mouldings such as car door liners, bumpers or hollow bodied parts. Technica Data GSL 300 Range GSL 300/400 - GSL 300/800 RangeGSL 300/400Rotor-Ø: 300 mmGrinding chamber:400 x 400 mmThe V shaped arrangement of the staggered rotor blades holds pre-cut material in the center of the cutting chamber. This prevents material sticking to the side walls and considerably reduces wear on the grinding chamber walls when processing fibre and glass reinforced plastics. The staggered rotor blades creates an individual blade cut thus increasing the cutting torque. GSL 300/600Rotor-Ø: 300 mmGrinding chamber:600 x 400 mmGSL 300/800Rotor-Ø: 300 mmGrinding chamber:800 x 400 mmDCB AType GSL 300/400 300/600 300/800Rotor speed (rpm) 150 150 150Number of rotor knives 33 48 66Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 300 300 300Width of the rotor (mm) 400 600 800Feed opening (mm) 400 x 400 600 x 400 800 x 400Opening cutting chamber (mm x mm) 400 x 400 600 x 400 800 x 400Drive capacity (kW) 7,5 - 11 11 18,5Weight approx. (kg) 550 890 980Dimensions:low executionWidth A (mm) 820 1100 1410Length B (mm) 1050 1010 1070Height C (mm) 690 710 700Height D (mm) 990 920 1050ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGY2 7 8GSL 180/120 - GSL 180/430 Range Technical Data GSL 200 RangeTechnical Data GSL 180 RangeThe slow-speed granulators in the ZERMA GSL range from 180/120 to 180/430 have been specially developed as show-running grinders for applications in the injection-moulding sector. The material to be granulated is fed via a sound-absorbing feed hopper that is available in a range of variants to suit the application. The slow-speed granulators of this range are mounted on either low or high level baseframes, depending on application, and with suction trough/bag fill chute to suit. With these numerous options, the slow speed granulators can be tailored to an extremely wide range of applications. In addition to the advantages common to all slow-running grinders such as low noise characteristics and near dust-free product, GSL 180/120 to GSL 180/430 stand out due to their special knife, rotor, 'quick-snap' opening and good accessibility features.GSL 180/120Rotor-Ø: 180 mmGrinding chamber:270 x 120 mmGSL 180/180Rotor-Ø: 180 mmGrinding chamber:270 x 180 mmGSL 180/300Rotor-Ø: 180 mmGrinding chamber:270 x 300 mmGSL 180/430Rotor-Ø: 180 mmGrinding chamber:270 x 430 mmType GSL 180/120 180/180 180/300 180/430Rotor speed rotor (rpm) 150 150 150 150Number of rotor knives 12 18 30 45Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 180 180 180 180Width of the rotor (mm) 120 180 300 430Feed opening (mm) 350 x 350 350 x 350 350 x 350 430 x 270Opening cutting chamber (mm x mm) 270 x 120 270 x 180 270 x 300 270 x 430Drive capacity (kW) 2,2 3,0 4,0 4,0Weight approx. (kg) 120 130 150 170Dimensiones:low executionWidth A (mm) 420 420 420 420Length B (mm) 850 910 1030 1160Height C (mm) 450 450 450 450Height D (mm) 600 600 600 900Type GSL 200/180 200/270 200/360 200/500Rotor speed (rpm) 150 150 152 152Number of rotor knives 12 18 24 33Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 200 200 200 200Width of the rotor (mm) 180 270 360 495Feed opening (mm) 240 x 240 240 x 310 460 x 310 460 x 310Opening cutting chamber (mm x mm) 250 x 190 250 x 280 250 x 370 250 x 505Drive capacity (kW) 3 3 4 4Weight approx. (kg) 175 205 235 270Dimensions:low executionWidth A (mm) 800 900 1080 1220Length B (mm) 510 510 510 510Height C (mm) 515 515 515 515Height D (mm) 670 670 700 760ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGY2 7 8GSL 180/120 - GSL 180/430 Range Technical Data GSL 200 RangeTechnical Data GSL 180 RangeThe slow-speed granulators in the ZERMA GSL range from 180/120 to 180/430 have been specially developed as show-running grinders for applications in the injection-moulding sector. The material to be granulated is fed via a sound-absorbing feed hopper that is available in a range of variants to suit the application. The slow-speed granulators of this range are mounted on either low or high level baseframes, depending on application, and with suction trough/bag fill chute to suit. With these numerous options, the slow speed granulators can be tailored to an extremely wide range of applications. In addition to the advantages common to all slow-running grinders such as low noise characteristics and near dust-free product, GSL 180/120 to GSL 180/430 stand out due to their special knife, rotor, 'quick-snap' opening and good accessibility features.GSL 180/120Rotor-Ø: 180 mmGrinding chamber:270 x 120 mmGSL 180/180Rotor-Ø: 180 mmGrinding chamber:270 x 180 mmGSL 180/300Rotor-Ø: 180 mmGrinding chamber:270 x 300 mmGSL 180/430Rotor-Ø: 180 mmGrinding chamber:270 x 430 mmType GSL 180/120 180/180 180/300 180/430Rotor speed rotor (rpm) 150 150 150 150Number of rotor knives 12 18 30 45Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 180 180 180 180Width of the rotor (mm) 120 180 300 430Feed opening (mm) 350 x 350 350 x 350 350 x 350 430 x 270Opening cutting chamber (mm x mm) 270 x 120 270 x 180 270 x 300 270 x 430Drive capacity (kW) 2,2 3,0 4,0 4,0Weight approx. (kg) 120 130 150 170Dimensiones:low executionWidth A (mm) 420 420 420 420Length B (mm) 850 910 1030 1160Height C (mm) 450 450 450 450Height D (mm) 600 600 600 900Type GSL 200/180 200/270 200/360 200/500Rotor speed (rpm) 150 150 152 152Number of rotor knives 12 18 24 33Number of stator knives 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges) 2 (4 cutting edges)Rotor diameter (mm) 200 200 200 200Width of the rotor (mm) 180 270 360 495Feed opening (mm) 240 x 240 240 x 310 460 x 310 460 x 310Opening cutting chamber (mm x mm) 250 x 190 250 x 280 250 x 370 250 x 505Drive capacity (kW) 3 3 4 4Weight approx. (kg) 175 205 235 270Dimensions:low executionWidth A (mm) 800 900 1080 1220Length B (mm) 510 510 510 510Height C (mm) 515 515 515 515Height D (mm) 670 670 700 760ULTIMATE SIZE REDUCTION TECHNOLOGY ULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGY9GSCPMGS GSHGSPGSEGSLZSSlow-speed GranulatorsOptions GSL 180 and GSL 300 RangeThe granulators of the GSL range can be equipped with numerous options for the most varied of intended applicationsHigh model, mobile bin GSL 300/400, high model High model, sack-fillThe Home of Size ReductionSubject to technical modification 09/2010, V 1.0ZERMA Recycling & Granulator TechnologyAccessoriesULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGYZERMA, with more than 60 years of experience, is one of the leading manufacturers of high quality granulators. Our product range begins with the small slow, speed granulators and reaches the large high performance granulators, including special machines such as the front entry granulators for pipes and profiles or the pulveriser systems for fine grinding applications. Using drive motors ranging from 2,2 kW to 200 kW, the ZERMA line of machines covers the complete spectrum of plastics size reduction applications.www.amis-gmbh.deAMIS Maschinen-Vertriebs GmbHIm Rohrbusch 15 74939 Zuzenhausen · Germany: +49 (0) 6226 7890-0Fax: +49 (0) 6226 7890-222info@amis-gmbh.dePhone9GSCPMGS GSHGSPGSEGSLZSSlow-speed GranulatorsOptions GSL 180 and GSL 300 RangeThe granulators of the GSL range can be equipped with numerous options for the most varied of intended applicationsHigh model, mobile bin GSL 300/400, high model High model, sack-fillThe Home of Size ReductionSubject to technical modification 09/2010, V 1.0ZERMA Recycling & Granulator TechnologyAccessoriesULTIMATE SIZE REDUCTION TECHNOLOGYULTIMATE SIZE REDUCTION TECHNOLOGYZERMA, with more than 60 years of experience, is one of the leading manufacturers of high quality granulators. Our product range begins with the small slow, speed granulators and reaches the large high performance granulators, including special machines such as the front entry granulators for pipes and profiles or the pulveriser systems for fine grinding applications. Using drive motors ranging from 2,2 kW to 200 kW, the ZERMA line of machines covers the complete spectrum of plastics size reduction applications.www.amis-gmbh.deAMIS Maschinen-Vertriebs GmbHIm Rohrbusch 15 74939 Zuzenhausen · Germany: +49 (0) 6226 7890-0Fax: +49 (0) 6226 7890-222info@amis-gmbh.dePhone gsl-2009-doppelseite-englisch - Kopie gsl-2009-doppelseite-englisch gsl-2009-klapper-englisch - Kopie (2) gsl-2009-klapper-englisch - Kopie gsl-2009-klapper-englisch