Show results for
Refine by
Drinking Water Equipment & Supplies
8 equipment items found
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed in a channel in which flows the water to be cleaned, the screen consists of a set of rectangular screening mesh panels carried by two endless chains. The panels travel up and down again between an upstream wall plate and a downstream partition with a central, outlet aperture set across the ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed across a channel in which the water to be cleaned flows through. The screen consists of a set of rectangular screening mesh panels, carried by two endless chains. The downstream panels travel down into the water, around the bottom and up again along the upstream side. The water flows across the upstream and then the downstream panels. The debris are arrested on the upstream face. The ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed in a channel in which the water to be cleaned flows, the screen consists of a set of rectangular screening mesh panels carried by two endless chains. The panels travel up and down again between an upstream partition set across the channel, with an inlet central aperture and a downstream wall set across the channel. The water enters through the aperture in the upstream partition, flows ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The drum screen is installed in a concrete chamber between two parallel side walls with large apertures. The drum consists of a cylindrical rotor with a cylindrical surface made of side-by-side rectangular mesh panels. The rotor has two bearings and a drive at deck level. The panels travel down into the water. The water flows into the inside of the drum screen via the two side-wall apertures and ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The bar rack is installed across the pit. The rake is normally parked in its top position above deck. The comb is disengaged from the bar rack. When a signal is received, the rake travels downwards, directed by the wall guides. On reaching the bottom, the rake tilts from its open position to its raking position. The rake tines penetrate between the bars of the rack. The rake travels up-wards ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The drum screen is installed in a concrete chamber between two parallel side walls with large apertures. The drum consists of a cylindrical rotor with a cylindrical surface made of side-by-side rectangular mesh panels. The rotor has two bearings and a drive at deck level. The panels travel down into the water. The water flows through the mesh panels into the drum chamber via the upstream inlet, ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
"R" Rakes are installed in the screening plant upstream of the travelling screens or the drum screens. The water flows across the inclined bar rack where the debris are arrested. The trash collecting rakes are held on two endless chains. They travel down, well clear of the bar screen, run around the bottom rail meshing between the bars. The debris are removed and loaded into the trash collecting ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
CV rakes are installed at the inlet of screening plants, ahead of the travelling band screens or the drum screens. The water flows across the vertical bar rack where the debris are arrested. When cleaning is required, the rake which is normally parked open above deck, travels down the wall guides and tilts when reaching the bottom. The rake engages the bar rack, travels up collecting all arrested ...