Environmental Testing Chambers (Environmental Management) ...

Premium

Advanced Energy - Model Mikron M360 - Blackbody Calibration Source with Two Portable Modules, 50 to 1100°C

Advanced Energy’s Mikron M360 blackbody calibration source combines portability, a wide temperature range, high emissivity, and remarkable resolution. Weighs only 17.8 kg (39.3 lb). High accuracy ±0.2% of reading ±1°C. Manufactured and tested to meet rigid quality control standards. Optional aperture ...

By Advanced Energy based in Milpitas, CALIFORNIA (USA). from Temperature Measurement Products - Calibration Sources - Mid Temp Blackbodies Product line

Premium

Model 831-LOWN - Sound Level Meter for Low Noise Level Measurement

Easily make low noise measurements to 6.5 dB A-weighted using the Model 831-LOWN sound level meter paired with the 378A04 low noise microphone and preamplifier. Due to the innovative design of the 378A04 which uses a prepolarized microphone and ICP (constant current) interface, the combination produces a highly portable system that is battery powered and intuitive to use for measuring low noise ...

By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA). from Sound Level Meters Product line

Premium

Air Innovations - Model AdvancAir - Custom Clean Room Air Conditioner

AdvancAir® custom environmental control units for cleanrooms put greater capacity and enhanced performance in a smaller footprint. AdvancAir units are built to your exact specification in a variety of system configurations. Our engineering staff will work with you one-on-one to create a full-sized prototype. You can then inspect and test the solution under contract load conditions simulated ...

By Air Innovations based in North Syracuse, NEW YORK (USA). from Cleanroom Air Conditioning (Cleanroom Systems) Product line

Nordic - Environmental Test Chamber

Temperature & humidity suitable for 25 °C& 60% RH, 40 °C & 75% RH, 30 °C & 65% RH. Specially designed chambers to carry out stability studies at low humidity conditions such as 25°C & 40% RH, 40°C & 25% RH NMT, 30°C & 35% ...

By Nordic Scientific & Natural Solutions AB based in Lund, SWEDEN. from Lab Testing Instruments - Test Chambers Product line

Hastest - Model H-DTSD-700 - Settling Dust Test Chamber

Hastest Solutions Dust Chambers are made for the simulation of Dust and Sand conditions in a controlled ...

By Hastest Solutions Inc. based in San Jose, CALIFORNIA (USA). from Environmental Test Chambers - Dust Test Chamber Product line

Proactive - Model IRAvibro Series - Vibration Test Chambers

TIRAvibro features a model series of vibration test chambers developed for combined tests under climatic and thermal impacts and mechanical and dynamical ...

By Proactive Test Solutions Ltd based in Leighton, UNITED KINGDOM. from Products - Environmental Test Chambers Product line

Torontech - Model TTXA Series - Xenon Arc Weathering Test Chamber

A Weathering chamber also called a climatic chamber or climate chamber, is an enclosure used to test the effects of specified environmental conditions on biological items, industrial products, materials, and electronic devices and components. It also artificially replicates the conditions under which machinery, materials, devices or components might be exposed. It is also used to accelerate the ...

By Torontech Inc. based in Markham, ONTARIO (CANADA). from Environmental Test Chamber - Accelerated Weathering Test Chamber Product line

NEVA - Industrial Noise Control Products

NEVA Associates has extensive experience in mitigating noise from a specific source as well as using engineered noise control systems to permit companies to eliminate 'Hearing Conservation Programs'. Acoustic materials suitable for all environments are available, from clean rooms to offices to manufacturing plant environments. NEVA will visit your facility for a no-cost noise/vibration ...

By NEVA Associates based in Newburyport, MASSACHUSETTS (USA).

GDX SO2 - Gas Dosing Units for Corrosion Tests

Gas Dosing units for sulfur dioxide and other gases – designed for corrosion tests according to test procedures as for example : DIN EN ISO 6988, DIN 50018 ( Kesternichtest ), DIN EN ISO 3231, mixed flowing gas testing IEC 60068-2- 60 and IMO DE53/WE.2. These units can provide gas atmospheres for high and low concentration ranges as well. They have been adapted to test cabinets from many ...

By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

Hastest - Model HPCH-252NTSB - Temperature & Humidity Chamber

Stainless Steel Plate (SUS#304, Mist) Interior. Steel Plate [Baked Panel] Exterior. High Density Polyurethane Froth Insulation. Unique, uniform airflow system. Vane Type Sirocco, L134, Fan. SUS #304 Stainless Steel, PT 100 Ω, Temp-Hum Sensors (2). Fin Heat Disperse-Stainless Steel ...

By Hastest Solutions Inc. based in San Jose, CALIFORNIA (USA). from Environmental Test Chambers - Medium Size Temperature / Humidity Chambers Product line

ESPEC - Model AR Series - Temperature Test Chambers

ESPEC AR series temperature test chambers and climate test chambers for rapid climate change rates. It features a wide temperature range and innovative control functions for demanding climatic cycling ...

By ThermoTEC Weilburg GmbH & Co. KG based in Weilburg, GERMANY. from Environmental Simulation- Temperature Test Chambers and Climate Test Chambers Product line

Espec - Model Platinous H-Series - Temperature and Humidity Chambers

The Platinous series lets you can select from a variety of sizes, ranges, and options to meet your specific environmental testing requirements. ESPEC Platinous series include features for quality and reliabile operation: Stainless steel exterior. Energy-efficient refrigeration with exclusive electronic expansion valve system. Specialized humidity generation and control. Unique thermal break ...

By Espec North America, Inc. based in Hudsonville, MICHIGAN (USA). from Reach-ins Product line

Climate and Temperature Test Chambers

Eurotest has seven climate chambers and two ovens for environmental testing in compliance with the strictest requirements: Achievable temperature limits: from - 60°C to +300°C. Humidity control up to 98 RH. Maximum dimensions of the equipment under test: 240 cm (height) x 160 cm (door width). Maximum useful area (inside base measurements of individual chamber): 290 cm x 370 cm. Maximum ...

By Eurotest Laboratori S.r.l. based in Brugine, ITALY.

simplewell - Auto Parts Sunlight Simulation Environmental Test Chamber

Auto Parts Sunlight Simulation Environmental Test Chamber Application: The Environmental Test Chamber is applicable for testing the automotive interior parts, such as IP,DP,Cockpit,CNSL,ashtrays,air outlets and other parts. ...

By Simplewell Technology Co.,Ltd based in Dongguan City, CHINA.

Global - Model N-series - Screening Chambers

ESPEC Global N-series screening chambers have a sophisticated design and feature particularly rapid temperature changes. They are ideal for stress screening tests in the automotive and electronics ...

By ThermoTEC Weilburg GmbH & Co. KG based in Weilburg, GERMANY. from Environmental Simulation- Temperature Test Chambers and Climate Test Chambers Product line

KOMEG - Model KMH-800R - Temperature and humidity test chamber

Temperature Humidity Test chamber is widely used in testing various types of materials for their tolerances of heat, cold, dry and humidity. It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication, instruction, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries. Unique shape ...

By KOMEG Technology Industrial Co., Ltd. based in Dongguan, CHINA.

Morningtest - Model MT - Industrial Drying Oven with RT+5°C~250°C

Industrial Drying Oven with RT+5°C~250°C is used for routine experiments and tests, it’s cost effective. ...

By Shanghai Morningtest Environmental Chambers Co., Ltd. based in Minhang District, CHINA. from Environmental Test Chambers - Industrial Dry Ovens Product line

Morningtest - Model MT - Oscillating Spray Testers

Oscillating spray testers are equipped with oscillating tube to fulfill different spray angel requirement of IPX3 spraying water test and IPX4 splashing water test. ...

By Shanghai Morningtest Environmental Chambers Co., Ltd. based in Minhang District, CHINA. from Environmental Test Chambers - Rain Test Chambers Product line

DGBELL - Model 2 - Temperature Humidity Test Chamber

DGBell’s Temperature and Humidity Test Chamber is able to simulate a wide range of temperature and humidity environment condition for testing various products and components. It is widely used for basic thermal cycling test and accelerated stress test. We provide 6 standard models, test cabinet from 80L to 1000L, customized size is also available. ...

By Guangdong Bell Experiment Equipment Co., Ltd based in CHINA.

DGBELL - Model 7 - Vibration Test System

DGBELL's Vibration Test System is a simulation of the various environments encountered in the manufacturing, assembly, transportation and use phases of execution. It is primarily used to identify the ability of a product to withstand environmental ...

By Guangdong Bell Experiment Equipment Co., Ltd based in CHINA. from DGBELL ECE R100 Lithium Battery Test Chamber Manufacturer Product line

Subscribe to our eBulletins