Events

  • Practical Air Dispersion & Accidental Release Modeling Workshop - International - Japan

    This 3-day course focuses on the fundamentals of air dispersion modeling, air dispersion modeling with AERMOD and CALPUFF, and accidental release modeling with BREEZE Incident Analyst. It provides hands-on instruction with all of these programs to those who wish to use the models, sharpen their existing modeling skills, or better understand results prepared by others. It is a combination of the ...


    TOKYO

  • 40 Hour HAZWOPER Training - Hazardous Waste Operations and Emergency Response

    Satisfy your HAZWOPER requirements with this comprehensive class that provides in-depth training for the emergency response operations related to releases of, or substantial threats of releases of, hazardous substances. HAZWOPER (Hazardous Waste Operations and Emergency Response) training is a requirement under OSHA regulation 29 CFR 1910.120 for all site workers who may be involved in hazardous ...


    DENVER

  • 5-day Hands-on Complete GC & GC-MS

    Course accreditation This course has been approved by the Royal Society of Chemistry for purposes of Continuing Professional Development (CPD). What will you learn on this course? This course provides the theory of the GC and MS essential to any participant, along with the hands-on practical element in the laboratory to practice and re-enforce the theoretical knowledge. These courses are 50% ...


    MILTON KEYNES

  • OSHA 30 Hour Course for Construction

    The OSHA 30 Hour course provides participants with recommended safe work practices as required under OSHA Standards, 29 CFR 1926. This training will give your employees the knowledge & tools to recognize, control & prevent the hazards most commonly found on a construction site. Course materials include a Student Handbook covering an Introduction to OSHA and OSHA's Focus Four and a copy of ...


    DENVER

  • OSHA 10 Hour Construction Course

    The OSHA 10 Hour Construction training program was designed by OSHA as a safety orientation for the entry level employee and general laborers. The objective of this construction safety course is to teach participants the importance of hazard recognition on a work site. This training is applicable to workers in the following industries: - All Construction Trades - Oil and Gas - Wind and Solar ...


    DENVER

  • 2-day Applied Deconvolution (AMDIS)

    This two day practical software course on the powerful Automated Mass Spectral Deconvolution and Identification System software mixes 50% presentations with 50% practical exercises using the software to get a good grasp of it's capabilities in performing deconvolution to process your GC-MS data. If you have complex samples with little chromatographic resolution or you need to check you have no ...


    MILTON KEYNES

  • 11th Edition P2P and Robotic Process Automation Strategy Workshop

    This marcus evans event will continue the journey towards true touch less E2E P2P process, or even from Master Data to Purchase to Pay  and towards achieving Straight Through Processing (STP), for even more automation of low-value added tasks and P2P staff getting more strategic roles with help of Predictive Data Analytics. ...


    AMSTERDAM

  • 3-day Mass Spectral Interpretation Sept 17

    This three-day course is an introduction to mass spectral interpretation, aimed at presenting the fundamental tools and rules when examining high quality full-scan GC-MS data. Every analyst using GC-MS should have a fundamental understanding of how a mass spectrum is generated and if a library match is correct or not. This course takes this a step further to enhance mass spectral knowledge. From ...


    MILTON KEYNES

  • 2-day Comprehensive GC-MS Software Training (Shimadzu GCMSsolution) Sept 17

    What will you learn on this course? The two-day Comprehensive GC-MS Software Training course introduces the Shimadzu GCMSsolution software for both instrument acquisition and data analysis. The course covers PC and data system installation, set-up and maintenance; an overview of GCMSsolution software; tuning methods; creating scan and SIM methods; sequences; qualitative and quantitative data ...


    MILTON KEYNES

  • 7th Annual Funds Transfer Pricing and Balance Sheet Management 2017

    Implement a forward looking FTP steering tool equipped to react to regulatory and market changes ...


    LONDON

  • OSHA - 8 Hour HAZWOPER Training

    Federal regulations require all employees who work on sites that may expose them to hazardous substances or health hazards receive training allowing them to work safely, knowledgeably and effectively. This one-day hands-on practical course is designed to meet the 8-hour annual refresher training requirements under OSHA's Hazardous Waste Operations and Emergency Response regulation [29 CFR ...


    BORDENTOWN

  • Arc Flash Electrical Safety/NFPA 70E Training

    The NFPA 70E/Arc Flash Electrical safety class is a must for anyone who installs, maintains or works near electrically energized equipment at industrial plants, utilities or commercial & private building facilities. This 2 day course covers OSHA and NFPA 70E requirements for electrical safety in the workplace and identifies requirements that are considered necessary to provide a workplace that ...


    DENVER

  • The Groundwater Pollution and Hydrology Course

    Groundwater quality is a national priority issue of immense and ever-growing proportions. The Federal government has passed strict, comprehensive and long-term legislation such as the Resource Conservation and Recovery Act (RCRA), the Superfund Amendments and Reauthorization Act (SARA), the Safe Drinking Water Act and the Pollution Prevention Act. Many state governments have passed even stricter ...


    SAN FRANCISCO

  • 3rd Edition Risk Audit in Banking

    This marcus evans event will enable banks to discuss the practical challenges involved in auditing the major risk change projects including IFRS9 credit risk modelling, the FRTB and others, across credit, market, counterparty credit and operational risk types. As well as this, this event will look at the challenges posed by increasingly complex models as part of the  major risk change ...


    LONDON

  • 21st Annual Capital Management and Allocation

    Optimising capital allocation strategies to maintain competitiveness in the changing regulatory landscape. The management and allocation of capital is becoming more difficult due to constantly changing and complex regulations being introduced. ‘Basel IV’ means that the standards for calculating risk capital are significantly developing, while the need to ensure MREL and TLAC ...


    LONDON

  • 4-day Comprehensive GC Training (Thermo TRACE GC with Xcalibur)

    The 4-day Comprehensive GC Training course introduces the fundamental theory of GC along with the operation, maintenance and troubleshooting of the Thermo TRACE Gas Chromatograph using Xcalibur software. This course is primarily for analysts and technicians responsible for the operation, maintenance and troubleshooting of Thermo gas chromatographs. It combines a mixture of classroom based ...


    MILTON KEYNES

  • Fundamentals of Industrial Hygiene

    Gain exposure to the broad field of industrial hygiene through sampling and workshop sessions, hands-on lab experiences, demo sessions, and problem-solving exercises. This four-day course is not only designed for OEHS professionals new to industrial hygiene or who have newly acquired IH responsibilities, but also serves as an excellent ...


    WESTERVILLE

  • Dispersion Modeling for Managers - Cincinnati, OH

    This 1-day course provides environmental managers, plant managers, and others with air quality responsibilities with a broad understanding of air dispersion modeling as a tool for compliance studies or permitting submittals. The course covers the fundamental modeling concepts as well as regulatory requirements for state and federal permitting. Screening and refined modeling tools are introduced. ...


    CINCINNATI

  • Practical Air Dispersion & Accidental Release Modeling Workshop - International - Germany

    This 3-day course focuses on the fundamentals of air dispersion modeling, air dispersion modeling with AERMOD and CALPUFF, and accidental release modeling with BREEZE Incident Analyst. It provides hands-on instruction with all of these programs to those who wish to use the models, sharpen their existing modeling skills, or better understand results prepared by others. It is a combination of the ...


    FRANKFURT

  • Fundamentals of Air Dispersion Modeling - Seattle, WA

    This intensive 2-day course is designed for entry level engineers, dispersion modelers, and meteorologists or others wanting to deepen their understanding of air dispersion modeling principles. Concise lectures supplemented by multi-media example problem sets, a short hands-on introduction to computer-based modeling software, and group discussions are used to maximize comprehension. Students ...


    SEATTLE

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you