Only show results in Virginia? Ok

Health & Safety Applications

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Ground Penetrating Radars (GPR) for Forensics and Military

    Police can use GPRs in different forensic investigations (search for hidden burials, underground hiding places and passages etc.).  Military uses of GPR include location and detection of buried explosive devices and land mines.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Cement mill, stone crusher dust filtration

    ECOGRACE bag filter bags is effective for filtration for cement mill, stone crusher,ect

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Nomex filter bags for asphalt mixing site dust filtration

    Nomex filter bag for higher temperature dust filtration ,widely applied in Asphalt mixing plant ,Kiln smoke in cement plant ,steel plant blast furnace smoke and so on. NOMEX filters offer one of the best total economies in a filtrationsystem because of higher air to cloth ratios, higher temperaturecapability, and a long wear life.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Geosynthetic Lining for Secondary Containment

    GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • LGS™ Valve Range -

    LGS™ (liquid,gas & steam) Valves are suitable for a wide range of applications. We offer a 'same day despatch' service to ensure your safety is guaranteed and that all systems are back in full operation within the quickest time-frame. www.seetru.com/lgs

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Evaporators technology for graphic arts, pulp & paper & textile industries

    Different industries with many different challenges to face. All of them have to find efficient and effective solutions to optimize the available resources for an ever more high competitiveness and, contextually, to comply with the most stringent regulations about the protection of the environment.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Asphalt Mixing Smoke Filtration

    Nomex Filter Bags Application:    Nomex Filter Bags is mainly used in cement industry, asphalt industry, metallurgical industry,steel mill and tobacco industry for flue gas purification. Performance:    Nomex Filter Bags continuous operating temperatures is up to 200°c, instant service temperature is up to 240°c.     Nomex Filter Bags fire retardant performance is excellent,    Corrosion resistance and alkali resistance is good,    Excellent thermal stability, excellent abrasion resistance and flexural resistance. Hydrolysis resistance is poor, when SOx and vapor in flue gas or dew point is frequent, it would greatly reduce its service life.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Fire Weather Monitoring

    FTS is the world leader in environmental monitoring solutions for fire weather. FTS stations are in use by every one of the top 50 government forest management agencies in every corner of the United States and Canada. No one else dedicates as much of its research and development efforts to the needs of fire weather professionals. FTS portable and fixed-site weather stations set the standard for reliability and simplicity of operation, maintenance, and installation. As a manufacturer, we design and engineer the leading datalogger that is approved and fully supported by the NIFC Remote Sensing Fire Weather Support Unit (RSFWSU). Our G5 GOES / Meteosat transmitter is recognized as the most reliable GOES technology available, and is licensed for use by other environmental monitoring equipment manufacturers.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • FoamFatale Storage Tank Fire Suppression System

    Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof tank.

    By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.

  • Soldering Fume Extraction

    Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics assembly industry and electronics repair comapnies who must deal with the hazards of solder smoke. Fumes created by automated PCB soldering including wave soldering machines, handheld soldering irons, torch brazing and furnance brazing are often ignored because of the small volume of smoke generated. However, these applications still require careful consideration as dangerous fumes can impair employee’s respiratory tracts depending on the filler metals used. Because manual soldering applications require working with tiny components, workers end up positioning their heads right above toxic rosin or lead solder fumes with a direct exposure into their throat, nasal passages and lungs, and as a result, they can experience respiratory complications. Rosin irritation can cause various side effects and the inhalation of lead fumes is carcinogenic. As lead oxide smoke collects in your lungs, it can be transferred into your bloodstream. Diversitech recommends installing soldering fume extraction equipment to prevent the inhalation of dangerous fumes. These ventilation units will not only protect each person working at a soldering station when installed and positioned correctly, but they will also prevent fumes from contaminating other worker’s lungs.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Wastewater Treatment for Car Wash

    Our current solution is based on several years of experience with water treatment for car wash systems using Rotating Bed Biofilm Reactor technology (RBBR). When combined with a flotation unit, solids are separated from the water, most of which can be recycled back to the washing system. Rotating Bed Bio Reactor (RBBR) developed by Clewer and specific microbe population are patented and suitable for use larger scale applications.

    By Clewer OY based in Turku, FINLAND.

  • Process design & engineering services for refinery & petrochemical industry

    On a large or small scale, Proxion Process fully understands the intricate details of refineries & petrochemical pants. We have extensive experience in optimising the design, procurement and construction of all refinery facilities, including distillation, hydro-processing, fluid catalytic cracking, coking, octane enhancement, hydrogen production and sulfur removal units.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Industrial Washers for Foundries

    We can manufacture a large variety of industrial washers specially designed for foundries. From the design concept of continuous-operation machines to the integration of automated and manual turntables, we are ready and able to meet your needs. We can also help with all of your applications: semi-automated, robotic or entirely automated. These various types of automated processes are only a few examples of the techniques that can be used in the design and manufacturing of solvent recycling equipment.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Waste water respirometry solutions for toxicity based consents

    Water companies, water authorities or publicly-owned treatment works (POTW) need to have some knowledge of the composition of the wastes they it receive. In addition to testing for ammonia and BOD or COD levels, treatment works can license industrial discharges on the basis of concentrations of some of the known toxic compounds. However, it is recognised that very many non-regulated toxic materials still enter the treatment works and reduce the efficiency of biodegradation, and may cause toxic shock. The way is now open for more widespread use of direct toxicity tests as a basis for toxicity-based consents. Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving waters, who are now using direct toxicity tests (DTA) or whole effluent toxicity tests (WET tests) in order to protect the receiving environment.

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Smoke generator device for oil mist generation

    Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and Kwangsan.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Meteo Information for Safe Operation

    In the industry segment meteo information is essential for safe operation. To deal with emergencies, accurate real-time information on wind conditions (direction and speed) is crucial. In some cases we feed this data directly into safety applications which models and predicts the progression of released gas clouds.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you