Only show results in Texas? Ok

Biocontamination Applications

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Coriolis Air Sampler for Biomedical & Health

    Coriolis air sampler collects biological particles in the air for biocontamination control in a biomedical and health environment

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Mold Control

    Controlling mold spores and bio-contaminants is a challenge for indoor gardeners that requires attention to detail and specialized equipment. An average cubic foot of air has around 100,000 mold spores. When sufficient moisture is available, mold grows. AgriAir Purifiers control and eliminate Aspergillus and many other types of spores, mildew, odors, and VOC as well as sanitize the air and hard surfaces from biological contaminants generated by organic decay during the entire growing process. AgriAir Purifiers...

    By AgriAir Equipment - a Brand by Omnitec Design Inc based in Mukilteo, WASHINGTON (USA).

  • Sample preparation and pumping systems for wastewater treatment industry

    A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Plazkat Systems for Treatment of emissions from the pharmaceutical industry

    In connection with treatment of emissions from the pharmaceutical industry it is neccessary to observe stringent restrictions on biological air contamination. The use of PLAZKAT units in the pharmaceutical industry not only allows effective treatment of biological contaminants in the air, but also of harmful impurities.

    By Plasma Air Systems Corporation OU based in Harju Maakond, ESTONIA.

  • Biological Ammonia Removal for Aquaculture

    Over the last thirty years, the Aquaculture industry has seen tremendous growth worldwide. Now, US producers are struggling because international suppliers are flooding the domestic market and driving prices down. Recently, the industry has been turned upside down with the introduction of the bio-floc technology. The underlying principle of the bio-floc technology is to create an environment that is “biologically” dominated, as opposed to the traditional system of allowing algae to be the primary...

    By Wastewater Compliance Systems, Inc. (WCS) based in Lehi, UTAH (USA).

  • Bio-Contaminant Control

    Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to...

    By AgriAir Equipment - a Brand by Omnitec Design Inc based in Mukilteo, WASHINGTON (USA).

  • Pure drinking water solutions for medical facilities

    Pure Water Distillers provide medical facilities with the ultimate 24/7 protection against microbiological and chemical contamination of water supplies. Pure Water Brand products have been trusted by medical facilities around the world for over 40 years to provide the ultimate in protection against microbiological and chemical contamination of water supplies. Pure Water is the leading manufacturer and authority on steam-distillation technology, which is the only technology that can offer…

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Agitation and mixing solutions for water and wastewater treatment.

    Municipal water treatment facilities utilize continuous mixing to process drinking water for municipalities. There are a variety of drinking water sources and therefore different processing steps for the water. Processes utilize rotating and static mixing to treat the water for human consumption.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Water Monitoring for Process Water in Food Industry and Industrial Water

    The quality of the process water is crucial in the food industry. At each process steps where the water interacts with the end product operators must avoid any potential contamination. Biological monitoring of the process water highly contributes to the safety of the production. WaterScope is a cost efficient solution. Its operation doesn’t require any special skills, intervention is only required in case of emergency which is signalled by an automated alarm function.

    By Waterscope International Inc. based in Budapest, HUNGARY.

  • Controlled Atmosphere Glove Boxes and Nitrogen Dry Boxes for Process Industry

    Glove boxes are designed for handling both hazardous substances and atmosphere sensitive materials. For controlled atmospheres, nitrogen dry boxes provide an isolated work environment for processing samples or handling air-sensitive materials while maintaining an anaerobic or other gas specific environment within the glove box. For work with hazardous materials, glove boxes provide a leak-tight environment protecting the user from exposure to potentially dangerous materials. Glove box applications include;...

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Water treatment research for pharmaceuticals industry

    Ultrapure water is essential in the pharmaceutical industry as it provides a high purity solution free of biological contamination for use in medical products. Supplying these systems is market worth 714 million. There is a shift in the industry as manufacturers of low-cost generic drugs take advantage of the expiry of patents on blockbuster drugs. Water technology suppliers need to be able to supply a reliable system to fit the increasingly tightened budgets within the industry. Developing markets like India,...

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you