Chemical Storage Articles

  • Hazardous Location LEDs in Chemical Manufacturing Facilities

    Employees inside chemical manufacturing plants are exposed to some of the most unforgiving work conditions in the industrial sector. This is because in such environments, workers are exposed to extreme temperatures, dust, volatile chemicals and invisible, explosive gases. Common protection methods against explosive risks include containment, segregation and prevention. Out of all the ...


    By Larson Electronics LLC

  • The ABCs of Polyethylene (PE / Plastic) Tanks

    The A B C’s of Poly Processing Tanks When deciding on choosing a particular industrial, commercial or residential polyethylene (PE or poly) processing ‘TANK’ there are specific and general issues that must be identified to define the actual tank, the configuration of the tank and fittings, and let us not forget the cost.  Cost will include the tank, the ...

  • Five Critical Parts For Your Steel Storage Tank

    Every year, we sell hundreds of parts for bolted tanks and welded steel tanks. Even though many ground storage tanks needing parts were not originally manufactured by Superior Tank Co., Inc., we can provide standard replacement components for steel storage tanks or can fabricate custom parts and accessories to ...


    By Superior Tank Co., Inc.

  • Higher-Quality Pumps Work Best For Bulk Liquid Terminals

    When you’re running a dockside petroleum liquid products, chemicals and LPG/LNG or multiple bulk liquids terminal, your reliability as a supplier – and the ability to win repeat business – is heavily reliant on the quality of the fluid-handling equipment and pumping systems on hand. Reliability rules For terminal operators, reliable handling and high transfer ...


    By DESMI A/S

  • Bulk Bag System Design Considerations

    Designing a new Bulk Bag Mix Tank Feed System? Here are some considerations during the design phase that will help meet expectations of plant managers and operators alike: Gravity feed of solution or metering pumps: Depending on the installation, solution/slurry from the mix tank can be gravity fed to process or if discharging into pressure, ...


    By IPM Systems, LLC

  • About Chemical Process Plants and Usage of Tanks

    In today’s scenario industrial development has reached new heights with many large scale factories and plants being set up to form numerous products for the benefit of mankind. One such plant which has seen vast growth in the last few years is Chemical Process Plant. As the name describes, such plants have been set ...


    By Greenplant Stainless Ltd

  • Seismoelectric survey project for oil, gas and water exploration in Shengli Oilfield, China - Case Study

    Seismo Electronics LLC. has recently finished a project for its client-Sinopec Shengli Oilfield Company. This project, which has over 8000 acre survey area, has been in the works since January, 2015. Our geophysicists used our instrument to detect reservoir 2000-4000m below ground surface. We provided three recommended drilling locations to our client, which all match the client’s existed ...


    By Seismo Electronic LLC.

  • Chemical Industry: Sale of by-Product HCl Covers Cost of Emission Control System Problem Case Study

    Some of the specialty chemical processes at a major chemical manufacturer’s plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low level of ...


    By CR Clean Air Group, LLC

  • Chemical Industry: HCL System Exceeds Current Regulations Emission control meets requirements while recovering by-product for sale Case Study

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemron maintains a strong environmental commitment, which views ...


    By CR Clean Air Group, LLC

  • Surveillance of the chemical and microbial quality of drinking water for safe water supply in an urban area

    To ascertain the quality of drinking water, surveillance of drinking water quality was conducted in Bhopal. The water supply to water treatment plants (WTPs) is from Kolar dam and Upper Lake. There was no significant change in water quality at the Kolar WTP on a day-to-day basis except in summer, when the manganese content of raw water was 0.3–0.4 mg/L, which was removed during treatment. The ...


    By IWA Publishing

  • Seattle, WA - Active chemical distribution facility - Case Study

    Guaranteed Remediation of TCE and PCE under Active Facility Project Summary TRS Group, Inc. (TRS) working with FLOYD|SNIDER a local Seattle consulting firm, completed a guaranteed fixed price remediation (GFPR) of tetrachloroethene (PCE) and trichloroethene (TCE) in soil at an active bulk chemical warehouse and distribution facility in Seattle, Washington. ...


    By TRS Group, Inc.

  • How can I safely manage storage of chemicals on my site?

    Most laboratories or industrial sites store chemicals of different hazard classes. On their own these each present certain hazards, but when mixed the danger can increase significantly. Storing your chemicals safely on site is crucial in preventing incompatible groups from mixing. Certain groups will react vigorously with others presenting hazards such as fire, release of gases or ...


    By Camlab Limited

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Atmosphere and climate, Environment, society and health, Carbon capture and storage (CCS), News Norwegian

    Is CCS installation the key technology to reduce CO2 missions from energy production? From NILU's annual report: Reducing CO2 emissions to the atmosphere is one way of combating the effects of global warming on the atmosphere, and thus limiting the consequences of climate change on ecosystems and human health Jozef M. Pacyna, Research ...

  • EN Rx Chemical Oxidants Treat Free Product

    CASE STUDY #0116 GATE 1204 PILOT, SEBRING, FL SITE OVERVIEW Active gas station in Sebring, FL FDEP Site Number: 8629375 ...


    By EN Rx

  • The Eco‐Environmental Solution for Expedient Construction of Helicopter Landing Pads - Case Study

    Environmental and Other Challenges As oil exploration efforts expand around the world, balancing the need to access land while adhering to environmental regulations and maintaining a minimal footprint can be a challenge. Access and transportation of materials into oil, gas, and mineral exploration sites create logistical challenges that significantly impact overall project costs. This is ...


    By Presto Geosystems

  • Bulk Storage and Piping Case Study

    Background: This major steel manufacturer was founded in 1900 in and established the first formal research department in the steel industry in 1910. It grew through the development of specialty steels and new technology. Among the many "firsts" was the development of continuous rolling technology. This company holds more U.S. patents than any other specialty steel company. ...


    By Mech-Chem Associates, Inc.

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • Some Chemical Applications Require the Range of a Positive Displacement Pump

    Chemical manufacturing includes complex processes. In fact, chemical manufacturing processes are so intricate that, typically, several unit operations exist within an overall process. These may include cracking, distillation and evaporation, gas absorption, and scrubbing and solvent extraction. Within these operations, transferring is the process of transporting fluid from one point to ...


  • Chemical blending is the most frequent kind of chemical process

    Chemical blending is one of frequent kind of chemical process that is commonly used in application. The procedure of mixing can potentially save  manufacturers time, labor, inventory, and transportation costs. Organic and inorganic chemicals can be blended. Substance could be blended in liquid form to a variety of pH levels and viscosities. This services ...


    By GlobeCore GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you