Health & Safety Downloads

OSE II is the cost effective, safe for humans, non toxic to Marine species, means to permanently remove oil from water, soil, ground water, and concrete, with no secondary haul off or response required. This power point shows the extreme number of efficacy tests, toxicity tests, showing OSE II is efficacios in almost all environments, and is non toxic to salt and fresh water species, including ...

May 3, 2017

By OSEI - Oil Spill Eater International, Corp

The Verderflex Dura 35 is a compact, high pressure medium flow hose pump with superior. secondary containment. Designed for dosing, metering, sampling, high lift or medium head. applications in brewing, chemical processing, industrial plants, water treatment and effluent. and waste water ...

Mar. 20, 2017

By Verderflex Peristaltic Pumps - part of the Verder Group

Greatest benefits of the econ VacuDry technology: Highly efficient thermal desorption is achieved due to a unique vacuum and indirect thermal oil heating system. Recovery of valuable resources rather than incineration. Highest safety and environmental protection standards – due to the vacuum process, nitrogen blanketing and full procedure control. Lowest emission of any desorber type ...

Feb. 22, 2017

By econ industries GmbH

The Ecosorb Maintenance Hole Gel Insert is a perforated inflow protector that is designed to allow odorous sewer gases to pass through a barrier of Ecosorb Gel odor neutralizer. Upon passing through the Ecosorb Gel layer the odorous gases are “scrubbed” to yield an odor-free effluent air stream. The Ecosorb Maintenance Hole Gel Insert is designed to hold one gallon of Ecosorb Gel. The ...

Nov. 18, 2016

By OMI Industries (OMI)

It’s a fact of life that every refinery and tank farm in the world has to contend with tank cleaning and that means many days of difficult, messy work. It also means that prior to cleaning, the tanks usually need to be vented to the atmosphere in order to reduce the gas content to a level below the lower explosion limit (LEL) and permit safe worker access. And that means odors; sulfides, ...

Nov. 18, 2016

By OMI Industries (OMI)

Hydrogen sulfide, (H2S), hydrocarbons, and other sulfur compound emissions sometimes related with bitumen production and transportation, can cause both safety and odor issues at refineries and terminals. The elimination of these emissions is a continuous issue for the bitumen ...

Nov. 18, 2016

By OMI Industries (OMI)

The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge, until now. The asphalt industry has been asking for a process additive that will control odors, not simply mask those odors. In response to the needs of the industry, OMI Industries, a long time leader in ...

Nov. 18, 2016

By OMI Industries (OMI)

The Ecosorb Gel Manhole Insert is a perforated inflow protector that is designed to allow odorous sewer gases to pass through a barrier of Ecosorb Gel odor neutralizer. Upon passing through the Ecosorb Gel layer the odorous gases are “scrubbed” to yield an odor-free effluent air stream. The Ecosorb Gel Manhole Insert is designed to hold one gallon of Ecosorb Gel. The life of the ...

Nov. 18, 2016

By OMI Industries (OMI)

Fences make good neighbors. Ecosorb makes happy neighbors. Discovering slick ways to eliminate grease odors. There’s nothing pleasing about fats, oils and grease processing odors. But you already know that. You’re the one that has to deal with complaints from local businesses and ...

Nov. 18, 2016

By OMI Industries (OMI)

ATN Engineering BV is the world leading supplier of refrigerator degassing equipment. It is located in the north of Holland and we supply plants throughout the world. We are always innovating, and expanding our experiences that makes us able to build machines that have the highest efficiency for the lowest possible ...

Jun. 28, 2016

By ATN Engineering B.V.

Beside chemical analysis, the characterization of pure as well as mixtures of substances is achieved with physical methods. Among other techniques, such as the determination of melting point, refractive index and density, optical spectroscopy in the ultraviolet and visible light range (UV/VIS) is widely applied in almost all market segments and workplaces in research, production and quality ...

Jun. 23, 2016

By Mettler - Toledo Int. Inc

Weighing  is  one  of  the  most  common,  critical  and  time  consuming   tasks in the laboratory. Balances have developed to the point that, in general,  no  special  weighing  room  is  necessary,  except  maybe  for  ultra-micro balances. Technological advances in electronics have ...

Jun. 16, 2016

By Mettler - Toledo Int. Inc

The well-proven head mount transmitter concept for analytical parameters. The M100 is the first transmitter for analytical measurements based on a compact, head mount design. With its approvals for hazardous area use the M100 head mount transmitter provides operating assurance even in challenging ...

Jun. 16, 2016

By Mettler - Toledo Int. Inc

The SuperSting with Wi-Fi is a portable resistivity, induced polarization (IP), and self-potential (SP) instrument with memory storage and user-defined measure cycles. It provides the highest accuracy and lowest noise levels in the ...

Jun. 8, 2016

By Advanced Geosciences, Inc.

35 toxicity tests on OSE II by third party groups on ocean water, as well as fresh water including nearshore testing as well as eco toxicity tests, including indocrine disruption tests. The US EPA established a standard during the BP spill that any LC or LD 50 test on a product that was 100 ppm> was virtually non toxic. The avaergae toxicity test on OSE II is greater than 1900 ppm showing that ...

May 21, 2016

By OSEI - Oil Spill Eater International, Corp

The ergonomic aspects of pipetting are easily overlooked, particularly among younger and less-experienced users. However, loading and ejecting tips, and aspirating and dispensing liquids – over and over and over – exerts considerable force on your thumb, hand and arm. The injurious effects of those forces accumulate over time, which is why your risk of developing a repetitive ...

May 18, 2016

By Mettler - Toledo Int. Inc

The X37 Series offers the most technically advanced x-ray inspection system on the market for tall, rigid containers. It provides a competitive advantage to food and pharmaceutical manufacturers, by providing a highly adaptable solution to suit individual applications, by offering a wide range of features, combined with low-power consumption, making the X37 a future-proof investment. The X37 ...

Feb. 22, 2016

By Mettler - Toledo Int. Inc

PipeChek/PipeChek PlusHigh Performancea METTLER TOLEDO Safeline PipeChek or PipeChek Plus operating platform offering customers a choice of software, x-ray generator and detector configurations to optimize the inspection.METTLER TOLEDO Safeline systems are built specifically for operation in harsh environments in food processing facilities, and are designed for convenient and thorough sanitation. ...

Feb. 19, 2016

By Mettler - Toledo Int. Inc

Automatic AdaptionElectrical RejectionThe Label Serialization Station dispenses the labels from the reel while automatically adapting to the printer´s speed. Each negative quality rating, will be rejected through an automatic electrically driven mechanism without the need for air pressure supply.Full Track & Trace SupportThe Label Serialization Station is acting as the starting point in a Track & ...

Feb. 19, 2016

By Mettler - Toledo Int. Inc

Installation Tips and Precautions: Never extend or cut the load cell’s cable length. Avoid moisture and dust. Ensure voltage stability (use regulated power supply). Avoid overload and shock. Ensure good grounding. For hazardous area installations in Europe, refer to the enclosed instructions ...

Dec. 5, 2015

By Mettler - Toledo Int. Inc