Only show results available in Connecticut? Ok

Dust Exposure Applications

  • Premium

    Special plants for recycling of refrigerators

    FORREC produces systems for the correct treatment of WEEE in the R1 category: refrigerators and electronic cooling appliances in general. WEEE waste in the R1 category may prove to be hazardous if it is not treated with due care. The danger of such appliances is due to the presence of refrigerants that are harmful to the atmosphere (CFC, R21, R22 and R600).

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Erosion and dust control products for hazardous site sealing / landfill

    Envirotac line of polymers can be used to make the base for landfills which will not allow the harmful pollutants to seep or leach into the earth. In addition, by spraying Envirotac on top of hazardous materials, it will contain the gases and odor by reducing the PPM, preventing air and water pollution.

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and components.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Vacuum technology solutions for steel & foundry industry

    In any steel manufacturing or metallurgical process, dust and waste material can have a significant and negative impact on production quality, as well as downtime, and of course repair time. Our machines and vacuum system solutions are primarily used to reduce the downtime resulting from plant breakdowns or interruptions caused by spillages. With every minute counting, the material must be removed quickly to get the system repaired and back in action.

    By Disab Vacuum Technology based in ESLÖV, SWEDEN.

  • Premium

    Water monitoring instruments for mining & mineral exploitation

    We can provide you with the systems that offer exploration, extraction, water supply, mine operations, rail transport, and environmental reporting.

    By Servelec Technologies with Primayer based in Eckington, UNITED KINGDOM.

  • Premium

    Vacuum technology solutions for municipality industry

    More and more cities see an increase of air pollution caused by fine dust and hazardous PM10 and PM2.5 particulates. Our DISA-CLEAN is a street & area sweeper that efficiently uses high-powered vacuum technology to permanently remove dirt, dust, and PM10 and PM2.5 particulates. DISA-CLEAN is a dust-free alternative to conventional street sweepers but with no water needed to suppress dust.

    By Disab Vacuum Technology based in ESLÖV, SWEDEN.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa, rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

    Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint, PCBs and asbestos on a large scale.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Laser Based Remote Sensing Instruments for Remote Dust Monitoring Industry

    Suspended sand and dust generates semi-permanent patterns of local and regional scales that persist in the atmosphere for several days. Moreover dust can be transported downwind affecting regions hundreds to thousands of kilometers away. The distance of transport is mainly depending on the meteorological conditions in the free atmosphere.

    By Raymetrics S.A. based in Athens, GREECE.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and...

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Erosion & sediment control solutions for wind remediation

    Wind erosion is a dominant geomorphological process in arid landscapes. Its effects contribute to the loss of soil resources and the emission of mineral dust, with major impacts on regional climate, biogeochemical cycles and human health. As an aside, ’desertification’ may sound like a course to end a sumptuous meal. But with just one ’s’, it refers to fertile land becoming dry desert. Many factors contribute to the problem, such as soil erosion, climate change and groundwater mismanagement...

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Waste Management Solutions for Metal Refining

    Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges,...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Emission Control Systems for Storage and Loading Areas

    The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and...

    By EmiControls based in Bolzano, ITALY.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

    When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited directly into 55-gallon drums, safely sealed and ready for transport and disposal when full. No costly containment is required for hazardous jobs, because dust is captured at the surface, before it’s emitted.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Air Pollution Removal Orthopedic appliances Industry

    Removal of acid gases and NOx from material surface treatments. Remove titanium dust from grinding, abrasive polishing and buffing operations. Emissions from high temperature furnaces.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Emission Control Systems for Recycling and Composting Industry

    The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and...

    By EmiControls based in Bolzano, ITALY.

  • Fire and explosion protection solutions for the wood and paper industry

    We provide explosion protection for wood processing factories where wood waste and dust pose a hazard. Various wood processing technologies show that flammable wood waste or dust accumulates in these facilities. In terms of evaluating the risk of explosion, finely sedimented dust is hazardous and in the event that this finely sedimented dust suspends and is connected to an ignition source, and explosion will occur.

    By RSBP spol. s r. o. based in Ostrava, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you