EHS Compliance and Regulations Applications

31 Results found
Only show results available in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: EHS Compliance and Regulations ×

Vacuum excavation solutions for diamond saw slurry

by Vac-Tron Equipment     based in Okahumpka, FLORIDA (USA)

Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

Noise monitoring solutions for urban noise

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The sounds in a city are central to our quality of life. Constant exposure to noise effects both our physical and psychological health, and our ability to learn and communicate.

Environmental testing & compliance screening for energy/environmental sector

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

Process Control for the Petrochemical Chemical Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes.

However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

Laboratory evaporation for pharmaceutical laboratories

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

Painting & Coating

by DiversiTech     based in Montreal, QUEBEC (CANADA)

Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

EH&S Regulatory Compliance Management for Healthcare Industry

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Providing high quality patient care gets tougher all the time, thanks to increasing cost pressures and an ever-changing compliance landscape. 3E`s powerful suite of outsourced services can be tailored to assist any healthcare organization in maintaining compliance and improving EH&S performance. 3E`s services have been proven to deliver cost savings for satisfied customers at thousands of healthcare locations.

EH&S Regulatory Compliance Management for Flavor, Food & Beverage Industry

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

For manufacturers in the flavor, food and beverage industries, changing market dynamics dictate the need for flexibility in meeting complex regulatory and market-driven requirements. Issues range from ensuring ingredient compliance with global regulatory requirements and safety standards, labeling products in diverse markets, generating supplier suitability assessments and collecting information from various stakeholders in the supply chain. Managing these issues while delivering quality products in record time is critical, as are optimizing business processes across your enterprise and global supply chain.

EH&S Regulatory Compliance Management for Industrial, Automotive & Heavy Equipment

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Few industries have a more complex supply chain than industrial and heavy equipment manufacturers. The number of suppliers they source from can be in the hundreds, even thousands, resulting in mountains of data to manage in order to meet the safety and compliance requirements of their finished products. 3E Company provides a central source of comprehensive, accurate compliance content solutions and services that can be easily managed and integrated into a manufacturer`s business processes. The results are increased levels of compliance, reduced risk and liability, and improved performance.

EH&S Regulatory Compliance Management for Pharmaceutical Industry

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Few industries are regulated as heavily as the pharmaceutical industry. Bringing a new product to market can take years and requires monumental effort. 3E Company stands ready with a comprehensive suite of products and services that can create efficiencies, support product stewardship, mitigate supply chain risk and improve compliance - ultimately shortening the time to get a product on the market.

EH&S Regulatory Compliance Management for Oil, Gas and Petrochemical

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Oil, gas and petrochemical companies are focused on striking a balance between improving the compatibility of their operations with the environment, while economically developing energy resources and supplying high quality products. The pressure to work with the public, government and various other stakeholders in their supply chain to use natural resources in an environmentally responsible manner while protecting the health and safety of employees and the public can be overwhelming. 3E provides a comprehensive suite of products and services that can support compliance challenges ranging from ensuring the safe and compliant production of finished products, to supporting employee safety programs.

Air pollution control for the pharmaceutical industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

For Sports Facilities

by Troy Acoustics Corporation     based in Brunswick, GEORGIA (US) (USA)

Troy Acoustics and its personnel have been involved in the Broadcasting, Movie and Recording industries for well over thirty years. Troy Acoustics has designed and installed acoustical treatments for dozens of facilities, for both new and updating purposes. The Troy System products, designs and installation techniques have provided quality, noise free, environments for all types of facilities where original programming is produced, enhanced or modified.

Smoke generator devices for lev testing, spray booth clearance testing & air testing

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of Substances Hazardous to Health (COSHH).

Safety incident tracking

by Perillon Software Inc.     based in Acton, MASSACHUSETTS (USA)

So you have a job that requires you to be involved in hazardous areas? Does your company promote high standards of safety culture? Are you regulated by the EPA, OSHA, and other federal, state, and local agencies? Documenting non-conformances and incidents in disparate static spreadsheets and home-grown solutions is not enough to meet most requirements. You need a centralized safety solution that also allows for detailed evaluations of root cause, corrective action tracking and trending performance so you can mitigate future risk and address systemic issues in the workplace. Perillon Workspace provides a comprehensive and powerful tool to quickly and efficiently identify trends, issues, and problems related to safety.

Determination of TOC in stack

by Pollution Srl     based in Budrio, ITALY

PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

EH&S Regulatory Compliance Management for Electronics And Medical Devices

by 3E Company     based in Carlsbad, CALIFORNIA (USA)

Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) to US legislation on conflict minerals. The depth and amount of information that suppliers must access, evaluate, compile, integrate and disclose is growing exponentially.

Product stewardship

by UL - The Wercs     based in Latham, NEW YORK (USA)

The WERCS software suite provides more than just SDS authoring software. We provide tools, technology and services to improve your business processes and advance product stewardship. Through our regulatory compliance software, organizations gain efficiencies at multiple levels. Our SARA and VOC/HAPs reporting modules help to streamline environmental monitoring requirements. Raw material and new product introductions are streamlined through our chemical approval process module. We execute all facets of SDS management and distribution, including SDS services for suppliers. Our relationship with regulatory content providers ensures you are compliant to global regulations.

SDS authoring

by UL - The Wercs     based in Latham, NEW YORK (USA)

Around the globe, The WERCS is considered the most comprehensive, automated SDS authoring software (also known as MSDS authoring software). Based on more than 27 years of experience, we are able to offer a scalable solution regardless of how many SDSs you author. And, because central to each one of our offerings is the industry standard in SDS software, The WERCS, you can rest assured that all your data, time and energy is preserved for your next expansion.

Need help finding the right suppliers?

Let the XPRTs do the work for you